Belt drive. V-ribbed belts for the automotive industry. Fatigue test

Fatigue failure is almost considered as the predominant problem affecting automotive parts under dynamic loading condition. Thus, more understanding of crack behavior during fatigue can strongly help in finding the proper mechanism to avoid the final fracture and extent the service life of components. The main goal of this paper is to study the fracture behavior of low carbon steel which is used mostly in automotive industry. For this purpose, the fractography of samples subjected to high and low stress levels in fatigue test then was evaluated and analyzed. Hardness and tensile tests were carried out to determine the properties of used steel. Also, the samples were characterized by microstructure test and XRD analysis to examine the constitute phases. The fatigue test (S-N curve) was done at stress ratio (R= -1), and the fracture examination was perform using Scanning Electron Microscope (SEM). The results of microstructure and XRD analysis were indicating that the Ferrite and a little amount of pearlite are the dominant phases of this steel. Whereas, the fractography observations reveal that the void coalescence ductile fracture is the main failure mode in samples with high stress level, while the ductile fracture (void coalescence) with Transgranular Cleavage fracture was noticed in low stress fatigue mode for this alloy.

Download Full-text

Making and Selling Cars: Innovation and Change in the U.S. Automotive Industry. By James M. Rubinstein. Baltimore and London: The Johns Hopkins University Press, 2001. Pp. ix, 401. $45.00.

The Journal of Economic History ◽

10.1017/s0022050703542358 ◽

2003 ◽

Vol 63 (3) ◽

pp. 910-913

Author(s):

ANTHONY PATRICK OBRIEN

Keyword(s):

Automotive Industry ◽

Johns Hopkins University ◽

Innovation And Change ◽

The U.S

Download Full-text

Microstructure of an extruded rapidly solidified Al-8Fe-2Mo alloy

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100144218 ◽

1986 ◽

Vol 44 ◽

pp. 548-549

Author(s):

W. T. Donlon ◽

J. E. Allison ◽

S. Shinozaki

Keyword(s):

Electron Microscopy ◽

Automotive Industry ◽

Fuel Economy ◽

High Strength ◽

Al Alloys ◽

Light Weight ◽

Thin Sections ◽

Strength And Durability ◽

Rapidly Solidified ◽

Whitney Aircraft

Light weight materials which possess high strength and durability are being utilized by the automotive industry to increase fuel economy. Rapidly solidified (RS) Al alloys are currently being extensively studied for this purpose. In this investigation the microstructure of an extruded Al-8Fe-2Mo alloy, produced by Pratt & Whitney Aircraft, Goverment Products Div. was examined in a JE0L 2000FX AEM. Both electropolished thin sections, and extraction replicas were examined to characterize this material. The consolidation procedure for producing this material included a 9:1 extrusion at 340°C followed by a 16:1 extrusion at 400°C, utilizing RS powders which have also been characterized utilizing electron microscopy.

Download Full-text