Pallet stackers and high-lift platform trucks. Stability tests

2010 ◽  
Keyword(s):  
High Lift ◽  
Stability Tests

INFLUENCE OF HIGH-BYPASS-RATIO TURBOFAN JETS ON AERODYNAMIC CHARACTERISTICS OF HIGH-LIFT WING

2015 ◽  
Vol 46 (7) ◽  
pp. 619-629
Author(s):  
Albert Vasilievich Petrov ◽  
Vladimir Fedorovich Tretyakov
Keyword(s):  
Aerodynamic Characteristics ◽  
High Lift ◽  
Bypass Ratio

Validation of computed high-lift flows with significant wind-tunnel effects

AIAA Journal ◽  
2001 ◽  
Vol 39 ◽  
pp. 1884-1892
Author(s):  
Stuart E. Rogers ◽  
Karlin Roth ◽  
Steven M. Nash
Keyword(s):  
Wind Tunnel ◽  
High Lift ◽  
Tunnel Effects

Oscillator stability tests on board armored vehicles

2004 ◽  
Author(s):  
H. Heikkila ◽  
P. Eskelinen ◽  
J. Ruoskanen ◽  
J. Peltonen ◽  
A. Serkola ◽  
...  
Keyword(s):  
Stability Tests ◽  
Armored Vehicles ◽  
Oscillator Stability

Designing of Outriggers for the Needs of the Vehicles Stability Testing

2018 ◽  
Vol 875 ◽  
pp. 71-76
Author(s):  
Victor Kryaskov ◽  
Andrey Vashurin ◽  
Anton Tumasov ◽  
Alexey Vasiliev
Keyword(s):  
Coefficient Of Friction ◽  
Computer Aided Design ◽  
Strength Analysis ◽  
Direct Impact ◽  
Stability Testing ◽  
Supporting Surface ◽  
Stability Tests ◽  
Computer Aided ◽  
Aided Design

This paper is dedicated to the issues of designing of outriggers for avoidance of vehicle tilting during its stability tests. An analysis of existing types of outriggers was done by authors as well as legislative requirements on them. The reliable and well-timed operation of outriggers largely depends on the height of their positioning on a vehicle. In order to determine this important parameter a special methodic of determining the tipping angle of the vehicle with the use of computer-aided design (CAD) was composed by authors. The article also contains some main principles of strength analysis of the structure a very important part of which became the necessity of determination of coefficient of friction between the outrigger sliders and the supporting surface. This coefficient has a direct impact on the value of transverse forces appearing at the ends of outrigger beams.

scholarly journals A Parametric Study of Trailing Edge Flap Implementation on Three Different Airfoils Through an Artificial Neuronal Network

Symmetry ◽  
2020 ◽  
Vol 12 (5) ◽  
pp. 828
Author(s):  
Igor Rodriguez-Eguia ◽  
Iñigo Errasti ◽  
Unai Fernandez-Gamiz ◽  
Jesús María Blanco ◽  
Ekaitz Zulueta ◽  
...  
Keyword(s):  
Aerodynamic Coefficients ◽  
Trailing Edge ◽  
High Lift ◽  
Trailing Edge Flaps ◽  
Artificial Neural Network Ann ◽  
Lift And Drag ◽  
Artificial Neuronal Network ◽  
Naca 0012 ◽  
Drag Ratio ◽  
Lift To Drag Ratio

Trailing edge flaps (TEFs) are high-lift devices that generate changes in the lift and drag coefficients of an airfoil. A large number of 2D simulations are performed in this study, in order to measure these changes in aerodynamic coefficients and to analyze them for a given Reynolds number. Three different airfoils, namely NACA 0012, NACA 64(3)-618, and S810, are studied in relation to three combinations of the following parameters: angle of attack, flap angle (deflection), and flaplength. Results are in concordance with the aerodynamic results expected when studying a TEF on an airfoil, showing the effect exerted by the three parameters on both aerodynamic coefficients lift and drag. Depending on whether the airfoil flap is deployed on either the pressure zone or the suction zone, the lift-to-drag ratio, CL/CD, will increase or decrease, respectively. Besides, the use of a larger flap length will increase the higher values and decrease the lower values of the CL/CD ratio. In addition, an artificial neural network (ANN) based prediction model for aerodynamic forces was built through the results obtained from the research.

scholarly journals Numerical analysis of high-lift configurations with oscillating flaps

2021 ◽  
Author(s):  
Johannes Ruhland ◽  
Christian Breitsamter
Keyword(s):  
Reynolds Number ◽  
Flow Separation ◽  
Separated Flow ◽  
Navier Stokes ◽  
Rotational Axis ◽  
High Lift ◽  
Hinge Point ◽  
Reduced Frequency ◽  
Flap Deflection ◽  
The Impact

AbstractThis study presents two-dimensional aerodynamic investigations of various high-lift configuration settings concerning the deflection angles of droop nose, spoiler and flap in the context of enhancing the high-lift performance by dynamic flap movement. The investigations highlight the impact of a periodically oscillating trailing edge flap on lift, drag and flow separation of the high-lift configuration by numerical simulations. The computations are conducted with regard to the variation of the parameters reduced frequency and the position of the rotational axis. The numerical flow simulations are conducted on a block-structured grid using Reynolds Averaged Navier Stokes simulations employing the shear stress transport $$k-\omega $$ k - ω turbulence model. The feature Dynamic Mesh Motion implements the motion of the oscillating flap. Regarding low-speed wind tunnel testing for a Reynolds number of $$0.5 \times 10^{6}$$ 0.5 × 10 6 the flap movement around a dropped hinge point, which is located outside the flap, offers benefits with regard to additional lift and delayed flow separation at the flap compared to a flap movement around a hinge point, which is located at 15 % of the flap chord length. Flow separation can be suppressed beyond the maximum static flap deflection angle. By means of an oscillating flap around the dropped hinge point, it is possible to reattach a separated flow at the flap and to keep it attached further on. For a Reynolds number of $$20 \times 10^6$$ 20 × 10 6 , reflecting full scale flight conditions, additional lift is generated for both rotational axis positions.

Sign in / Sign up

Export Citation Format

Share Document