High-pressure flexible connections for use with medical gas systems

Despite continued advances in rubber technology, the design of elastomeric flexible connections, used in offshore pipelines transporting high-pressure/high-temperature hydrocarbon fluid/gas mixture, remains more of an art than a science, primarily due to the intricate behavior of rubber. The mechanical response of rubber is dependent on time, temperature and mode of loading. It is susceptible to explosive decompression damage. Rubber’s non-linear stress-strain curves, creep, hysteresis and other properties are influenced not only by the method of fabrication but also by age. If these characteristics are not accounted for properly, the result can be less precision in design compared with metals. At present, there are no codes or standards that directly address the design, analysis or evaluation of the elastomeric flexible connections used in offshore oilfield applications. Based on the results of the recent research, the significance of key parameters that affect the short term and long term structural performance of elastomeric flexible connections is presented in this paper.

Download Full-text

High-pressure flexible connections for use with medical gases

10.3403/01892845 ◽

2000 ◽

Keyword(s):

High Pressure ◽

Flexible Connections

Download Full-text

High-pressure freezing of cells in suspension for low-voltage scanning electron microscopy (LVSEM)

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100084624 ◽

1991 ◽

Vol 49 ◽

pp. 64-65

Author(s):

Marek Malecki ◽

James Pawley ◽

Hans Ris

Keyword(s):

Electron Microscopy ◽

High Pressure ◽

Low Voltage ◽

Culture Media ◽

Cell Structure ◽

Freeze Substitution ◽

Ice Crystal ◽

High Pressure Freezing ◽

Cell Culture Media ◽

Voltage Scanning

The ultrastructure of cells suspended in physiological fluids or cell culture media can only be studied if the living processes are stopped while the cells remain in suspension. Attachment of living cells to carrier surfaces to facilitate further processing for electron microscopy produces a rapid reorganization of cell structure eradicating most traces of the structures present when the cells were in suspension. The structure of cells in suspension can be immobilized by either chemical fixation or, much faster, by rapid freezing (cryo-immobilization). The fixation speed is particularly important in studies of cell surface reorganization over time. High pressure freezing provides conditions where specimens up to 500μm thick can be frozen in milliseconds without ice crystal damage. This volume is sufficient for cells to remain in suspension until frozen. However, special procedures are needed to assure that the unattached cells are not lost during subsequent processing for LVSEM or HVEM using freeze-substitution or freeze drying. We recently developed such a procedure.

Download Full-text

Prolonged Fixation Studies For Spaceflight

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100072101 ◽

1973 ◽

Vol 31 ◽

pp. 332-333

Author(s):

Robert Corbett ◽

Delbert E. Philpott ◽

Sam Black

Keyword(s):

High Pressure ◽

Living Systems ◽

Prolonged Storage ◽

Time Intervals ◽

Early Signs ◽

Large Numbers

Observation of subtle or early signs of change in spaceflight induced alterations on living systems require precise methods of sampling. In-flight analysis would be preferable but constraints of time, equipment, personnel and cost dictate the necessity for prolonged storage before retrieval. Because of this, various tissues have been stored in fixatives and combinations of fixatives and observed at various time intervals. High pressure and the effect of buffer alone have also been tried.Of the various tissues embedded, muscle, cartilage and liver, liver has been the most extensively studied because it contains large numbers of organelles common to all tissues (Fig. 1).

Download Full-text

Cryosectioning plant roots prepared by high-pressure freezing

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100127748 ◽

1987 ◽

Vol 45 ◽

pp. 662-663

Author(s):

R.E. Crang ◽

M. Mueller ◽

K. Zierold

Keyword(s):

High Pressure ◽

Cell Walls ◽

Plant Tissues ◽

Ice Crystal ◽

High Pressure Freezing ◽

Vitreous State ◽

Radial Depth ◽

Irregular Topography ◽

Considerable Depth ◽

Conventional Freezing

Obtaining frozen-hydrated sections of plant tissues for electron microscopy and microanalysis has been considered difficult, if not impossible, due primarily to the considerable depth of effective freezing in the tissues which would be required. The greatest depth of vitreous freezing is generally considered to be only 15-20 μm in animal specimens. Plant cells are often much larger in diameter and, if several cells are required to be intact, ice crystal damage can be expected to be so severe as to prevent successful cryoultramicrotomy. The very nature of cell walls, intercellular air spaces, irregular topography, and large vacuoles often make it impractical to use immersion, metal-mirror, or jet freezing techniques for botanical material.However, it has been proposed that high-pressure freezing (HPF) may offer an alternative to the more conventional freezing techniques, inasmuch as non-cryoprotected specimens may be frozen in a vitreous, or near-vitreous state, to a radial depth of at least 0.5 mm.

Download Full-text

High-pressure freezing and freeze substitution of plant tissue

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100124148 ◽

1992 ◽

Vol 50 (1) ◽

pp. 748-749

Author(s):

William P. Sharp ◽

Robert W. Roberson

Keyword(s):

High Pressure ◽

Cell Structure ◽

Leaf Tissue ◽

Freeze Substitution ◽

Crystal Formation ◽

Ice Crystal ◽

High Pressure Freezing ◽

Cell Components ◽

Cold Metal ◽

Brome Grass

The aim of ultrastructural investigation is to analyze cell architecture and relate a functional role(s) to cell components. It is known that aqueous chemical fixation requires seconds to minutes to penetrate and stabilize cell structure which may result in structural artifacts. The use of ultralow temperatures to fix and prepare specimens, however, leads to a much improved preservation of the cell’s living state. A critical limitation of conventional cryofixation methods (i.e., propane-jet freezing, cold-metal slamming, plunge-freezing) is that only a 10 to 40 μm thick surface layer of cells can be frozen without distorting ice crystal formation. This problem can be allayed by freezing samples under about 2100 bar of hydrostatic pressure which suppresses the formation of ice nuclei and their rate of growth. Thus, 0.6 mm thick samples with a total volume of 1 mm3 can be frozen without ice crystal damage. The purpose of this study is to describe the cellular details and identify potential artifacts in root tissue of barley (Hordeum vulgari L.) and leaf tissue of brome grass (Bromus mollis L.) fixed and prepared by high-pressure freezing (HPF) and freeze substitution (FS) techniques.

Download Full-text