Hard coal and coke. Determination of ash fusibility

2008 ◽  
Keyword(s):  
Hard Coal ◽  
Ash Fusibility

scholarly journals Determination of the effective thermal conductivity of solid fuels by the laser flash method

2014 ◽  
Vol 35 (3) ◽  
pp. 3-16 ◽  
Author(s):  
Monika Kosowska-Golachowska ◽  
Władysław Gajewski ◽  
Tomasz Musiał
Keyword(s):  
Thermal Conductivity ◽  
Room Temperature ◽  
Laser Flash ◽  
Physical Structure ◽  
Solid Fuels ◽  
Flash Method ◽  
Hard Coal ◽  
Coal Rank ◽  
Dominant Effect

Abstract In this study, a new laser flash system was proposed for the determination of the thermal conductivity of brown coal, hard coal and anthracite. The main objective of the investigation was to determine the effect of coal rank, composition, physical structure and temperature on thermal conductivity. The solid fuels tested were medium conductors of heat whose determined thermal conductivities were in the range of 0.09 to 0.23W/(mK) at room temperature. The thermal conductivity of the solid fuels tested typically increased with the rank of coal and the measurement temperature. The results of this study show that the physical structure of solid fuels and temperature have a dominant effect on the fuels’ thermal conductivity.

scholarly journals DETERMINATION OF PEAT ASH FUSIBILITY OF KIROV REGION DEPOSITS

2019 ◽  
Vol 20 (11-12) ◽  
pp. 27-33
Author(s):  
V. A. Kuzmin ◽  
I. A. Zagrai ◽  
I. A. Desiatkov
Keyword(s):  
Fly Ash ◽  
Chemical Composition ◽  
Melting Temperature ◽  
Operating Temperature ◽  
Melting Characteristics ◽  
Steam Boilers ◽  
Ash Fusibility ◽  
The Individual ◽  
Individual Particles

The paper deals with the issues related to the effect of slagging within the steam boilers furnaces and shows the determination results on peat ash fusibility of Kirov region deposits. Fusibility properties of peat ash (temperatures of deformation, sphere, hemisphere and flow) from the four industrial areas (Dymny, Pishchalsky, Karinsky, Gorokhovsky) depending on its chemical composition are presented. Melting temperature of the mineral part of the peat, determined by GOST, is averaged and does not reflect the actual melting temperature of the individual particles in fly ash. The existence of such separate particles having a melting temperature below the average melting temperature of the ash makes it difficult to find the operating temperature of the torch to reach the minimum of the furnace slagging during peat combustion. The comparison of melting characteristics of peat ash with the reference literature data is performed. The initial slagging temperature is calculated depending on the ratio of the acidic and basic oxides in peat ash.

Sign in / Sign up

Export Citation Format

Share Document