Fibreboard drums. Removable head (open head) drums with closing rings with a nominal capacity of 15 l to 250 l

2006 ◽  
Keyword(s):  
1996 ◽  
Vol 34 (11) ◽  
pp. 25-32 ◽  
Author(s):  
P. Chudoba ◽  
R. Pujol

Most of municipal activated sludge plants located in wine production regions receive winery wastewaters during the grape harvest period which lasts usually only a few weeks. A drastic increase in organic pollution (COD, BOD) during this period generates a temporary overloading, resulting very often in biological problems such as decreased sludge settleability, sludge floc disintegration, increased SS concentration in treated effluent and in the worst case a complete plant failure. In order to work satisfactorily even during those temporary overloading periods, the plant has to be oversized. This strategy is rather costly, because such a plant has to run below its nominal capacity during a major part of the year. An original solution has been proposed and successfully tested at a municipal wastewater treatment plant in Eguisheim, France. The proposed technique is based on the addition of a mineral material with a low particle size, whose presence positively influences the physical behaviour of the sludge and will allow the nominal capacity of the plant to be surpassed without any important modification. The modification of the sludge structure around the added powdered material improved significantly the sludge settleability (DSVI< 160 ml/g) and enabled the plant to treat organic pollution several times higher than the nominal level.


2021 ◽  
Vol 6 (1) ◽  
Author(s):  
Ricardo J. Sánchez ◽  
Daniel E. Perrotti ◽  
Alejandra Gomez Paz Fort

AbstractSince 2006, when the Emma Maersk broke into the world of shipping, the growth in containership size has remained a continuous trend.For the last 14 years, since 2006, the enlargement of fullcontainerships size has remained a continuous trend since Emma Maersk broke into the world of shipping. This process - that also affected north-south trades - has crucial implications in the shipping business, particularly in the planning of ports and its services and related activities. This paper analyses the global increase in vessel size and forecasts larger vessels’ arrival to South American coasts. The paper analyses evidence since 2006 to understand the factors behind the trend for bigger ships (fleets between 18,000 and 24,000 TEU) and introduce a validated methodology for the prediction of the size of container ships. Experts presented a consensus vision in which factors associated with infrastructure, economics, technology, and the environment play a crucial role in driving the trend. Next, the paper presents a methodology for forecasting the size of containerships and applies it to Latin America’s trade. The models include two alternative thresholds for the dependent variables (1310 ft LOA and 18,000 TEU of nominal capacity) that are controlled by cascading effect (i.e., the size gap between Latin America and the world’s main trade routes), and the economic activity at the destination countries (represented by port activity). Finally, the conclusions highlight the forecast’s call to take action on infrastructure planning and investments, analyzing issues such as “economies of scale,” concentration, or entry barriers. Overall, the paper warns about the importance of efficient medium-term planning in the port industry to maximize its economic impact.


2019 ◽  
Vol 45 (2) ◽  
pp. 85-91
Author(s):  
Kostyantyn Burak ◽  
Vitaliy Kovtun ◽  
Mary Nychvyd

The purpose of this work is to increase the accuracy, quality and information content of geodetic surveys of vertical steel tanks by using modern geodetic equipment and creating algorithms for data processing of these observations. Method. In order to increase the information content of data for straightening, it is proposed to calculate the geometric parameters of vertical steel tanks not only in places where data are directly obtained through instrumental observations, but also at any point of the 3D surface of the tank. The paper describes an algorithm for creating a 3D surface of a tank by bicubic spline interpolation (BSI). Results on the basis of the conducted research, it was established that the developed algorithm could be used and the 3D-surface spatial coordinates were determined. The method of determining the geometric parameters of vertical steel tanks by using BSI is improved. Scientific novelty and practical significance. Bicubic spline interpolation (BSI) was used for the first time. It greatly increases the accuracy and informality of the results of the control. The practical significance is confirmed by the control of the geometric parameters of a vertical cylindrical steel tank with a nominal capacity of 75.000 m3 with a floating roof and a double wall of the LODS “Brody” company.


1981 ◽  
Vol 103 (1) ◽  
pp. 56-61 ◽  
Author(s):  
Gershon Grossman ◽  
Joseph R. Bourne ◽  
Jonathan Ben-Dror ◽  
Yigal Kimchi ◽  
Isaiah Vardi

The present article describes a theoretical evaluation of two design improvements made in a lithium bromide absorption chiller which contribute substantially to its performance in solar applications. One is the addition of a solution preheater which allows for a considerable reduction in generator size and cost, and improves performance at part load. The other is the addition of an auxiliary generator which enables the chiller to operate at nominal capacity or higher at all times, while utilizing to a maximum the solar radiation available at the time, however small. This is an effective solution to the problem of backup required in all solar-powered systems. The evaluation has been performed by computer simulation and results are presented for the performance of the unit with different configurations of the above systems. The results indicate the limitations on the part of the load to be supplied by the preheater. They point toward the advantage of using an auxiliary generator in a separate shell from the solar-powered generator and with a separate condenser. Operating curves for the chiller with the design improvements are given.


2018 ◽  
Vol 13 (3) ◽  
pp. 589-593 ◽  
Author(s):  
T. Niwa ◽  
R. Yin ◽  
M. H. Oo ◽  
H. Noguchi ◽  
T. Watanabe ◽  
...  

Abstract Application of membrane technology for water reclamation has grown significantly in recent years due to reduced footprint size and more consistent product water quality. For a membrane bioreactor (MBR) system, it is critical for it to be robust to allow membrane systems to operate at higher flux without significant increase of trans-membrane pressure (TMP). A full-scale ceramic MBR system was installed at Changi Water Reclamation Plant (CWRP) as part of an MBR retrofit project to increase treatment capacity without expanding the plant's footprint. The nominal capacity of the ceramic MBR system is 15,000 m3/d. The system has been successfully operating since January 2017 with a net flux of 30–60 L/m2-hr (LMH). Stable operation was observed at nominal production capacity for more than 3 months. During that period, the TMP was stable in the range of 9–14 kPa for Tank A and 10–17 kPa for Tank B. Permeate turbidity was recorded in the range of 0.04–0.06 NTU for both Tank A and Tank B.


Batteries ◽  
2019 ◽  
Vol 5 (4) ◽  
pp. 70
Author(s):  
Shashank Arora ◽  
Ajay Kapoor

High manufacturing cost and thermal stability of Li-ion battery cells are currently the two main deterrents to prolific demand for electric vehicles. A plausible solution to this issue is a modular/scalable battery thermal management system (TMS). A modular TMS can ensure thermal reliability for battery cells of different capacities and size without needing major structural revision besides facilitating mass-production. However, understanding the relationship of heat generation rates with cell capacity and thickness is essential for developing a scalable TMS. The present paper discusses results derived from an experimental investigation undertaken with this purpose. Heat generation rates for LiFePO4 pouch cells of different nominal capacities are measured at discharge rates of 0.33C, 1C and 3C in ambient temperatures ranging between −10 and 50 °C using a custom-designed calorimeter. It is observed that heat generation rates of the LiFePO4 pouch cells become independent of their nominal capacity and thickness if the ambient temperature is regulated at 35 °C. In ambient temperatures lower than 35 °C though, the thin battery cells are found to be generating heat at rates greater than those of thick battery cells and vice-versa at temperatures over 35 °C for all discharge rates.


2009 ◽  
Vol 131 (2) ◽  
Author(s):  
Cheng-Wei Tien ◽  
Kun-Huang Yu ◽  
Wen-Junn Sheu ◽  
Chi-Chuan Wang

This study examines the refrigerant distribution of a dual cold-plate system subject to the influence of heating load, using a R-134a based vapor compression system with a nominal capacity ranging from 50 W to 250 W. The cold plate is of identical configuration. Initially, test is performed under an equal heating load for each cold plate (70 W), which then gives rise to a uniform distribution and equal outlet superheat condition. For an unequal heating load, it is found that the distribution of mass flowrate subject to the influence of heating load is strongly related to the outlet states of the two cold plates. For the condition where one of the cold plates is in superheated state while the other is in saturated state, the mass flowrate for the fixed heating load is lower than that of smaller heating load, and the difference increases when the heating load gets smaller due to the influence of accelerational pressure drop. A maximum of 17% difference is seen at a loading ratio of 0.571 (40 W/70 W). For the condition where both outlet states of the cold plate are at superheated states, the mass flowrate for the fixed heating load is marginally higher than that of the smaller heating load, and the difference is insensitive to the increase in heating load. For this situation, the effect of accelerational pressure is negligible, and it is mainly attributed to two-phase/single-phase distribution pertaining to the effect of heating load.


Sign in / Sign up

Export Citation Format

Share Document