Welding consumables. Technical delivery conditions for welding filler metals. Type of product, dimensions, tolerances and markings

2003 ◽  
Keyword(s):  
Welding Consumables ◽  
Filler Metals

Transformation Temperatures and Welding Residual Stresses in Ferritic Steels

2007 ◽  
Author(s):  
J. A. Francis ◽  
H. J. Stone ◽  
S. Kundu ◽  
R. B. Rogge ◽  
H. K. D. H. Bhadeshia ◽  
...  
Keyword(s):  
Residual Stress ◽  
Arc Welding ◽  
Structural Integrity ◽  
Steel Plates ◽  
Stress Distributions ◽  
Metal Arc Welding ◽  
Thick Steel ◽  
Steel Welds ◽  
Welding Consumables ◽  
Filler Metals

Residual stress in the vicinity of a weld can have a large influence on structural integrity. Here the extent to which the martensite-start temperature of the weld filler metal can be adjusted to mitigate residual stress distributions in ferritic steel welds has been investigated. Three single-pass groove welds were deposited by manual-metal-arc welding on 12mm thick steel plates using filler metals designed to have different martensite-start temperatures. Their residual stress distributions were then characterised by neutron diffraction. It was found that a lower transformation temperature leads to a potentially less harmful stress distribution in and near the fusion zone. The experimental method is reported and the results are interpreted in the context of designing better welding consumables.

CERAMETiL FILLER METALS 616, 716, 721

Alloy Digest ◽  
1993 ◽  
Vol 42 (9) ◽  
Keyword(s):  
Physical Properties ◽  
Filler Metals

Abstract CERAMETiL 616, 716, 721 are silver brazing filler metals with a titanium-bearing coating to facilitate brazing to ceramics and other hard-to-wet materials without the need for prior metallizing procedures. This datasheet provides information on composition and physical properties. It also includes information on joining. Filing Code: AG-12. Producer or source: Lucas-Milhaupt Inc.

NIMROD C276, C276KS

Alloy Digest ◽  
2002 ◽  
Vol 51 (8) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Tensile Properties ◽  
Heat Treating ◽  
Nominal Composition ◽  
Corrosion Resistant ◽  
Welding Consumables

Abstract NimRod C276 and C276KS are Ni-Cr-Mo-W-type welding consumables with a nominal composition of Ni, 15% Cr, 16% Mo, 4% W, and 5% Fe. They are used to join high-molybdenum-containing corrosion-resistant alloys to themselves and each other. This datasheet provides information on composition, hardness, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as heat treating and joining. Filing Code: Ni-589. Producer or source: Metrode Products Ltd.

Sign in / Sign up

Export Citation Format

Share Document