Graphic technology. Prints and printing inks. Assessment of resistance to various agents

2015 ◽  
Keyword(s):  
Printing Inks

Effect of ink and paperboard characteristics on flexographic print quality based on print density

TAPPI Journal ◽  
2011 ◽  
Vol 10 (9) ◽  
pp. 7-13
Author(s):  
KHODADAD MALMIRCHEGINI ◽  
FARSHAD SARKHOSH RAHMANI
Keyword(s):  
Water Absorption ◽  
Significant Influence ◽  
Particle Diameter ◽  
Print Quality ◽  
Printing Technology ◽  
Plastic Films ◽  
Printing Inks ◽  
Packaging Industry ◽  
Solids Content ◽  
Density Results

Flexography is an evolving printing technology that is suitable for printing on coated and uncoated paperboard and board, nonporous substrates including metalized and paperboard foils, and plastic films used especially in the packaging industry. This study evaluated the effect of paperboard and ink characteristics on flexographic print density in paperboard. Three commercial paperboards from different companies were prepared: brown kraft from Thailand, white kraft from Spain, and test liner from Iran. Four samples of process print inks from Iran were used in this investigation. Paperboard properties, such as roughness and water absorption, and ink characteristics, including solids content, PH and particle diameter, were measured. The inks were printed on paperboards using a roll no.15 applicator with a blade metering device, and the print densities were measured. Results showed that solids content, pH, and particle diameter of printing inks influenced print density, while the roughness and water absorption of the three types of paperboard had no significant influence on print density. Results also illustrated that two levels of ink viscosity (25–30 and 50–55 mPa·s) were insignificant to print density.

scholarly journals Cu2Se-based thermoelectric cellular architectures for efficient and durable power generation

2021 ◽  
Vol 12 (1) ◽  
Author(s):  
Seungjun Choo ◽  
Faizan Ejaz ◽  
Hyejin Ju ◽  
Fredrick Kim ◽  
Jungsoo Lee ◽  
...  
Keyword(s):  
Power Generation ◽  
3D Printing ◽  
Power Output ◽  
Waste Heat ◽  
Computational Simulation ◽  
Mechanical Stiffness ◽  
Higher Power ◽  
Printing Inks ◽  
Binder Free ◽  
Sustainable Power

AbstractThermoelectric power generation offers a promising way to recover waste heat. The geometrical design of thermoelectric legs in modules is important to ensure sustainable power generation but cannot be easily achieved by traditional fabrication processes. Herein, we propose the design of cellular thermoelectric architectures for efficient and durable power generation, realized by the extrusion-based 3D printing process of Cu2Se thermoelectric materials. We design the optimum aspect ratio of a cuboid thermoelectric leg to maximize the power output and extend this design to the mechanically stiff cellular architectures of hollow hexagonal column- and honeycomb-based thermoelectric legs. Moreover, we develop organic binder-free Cu2Se-based 3D-printing inks with desirable viscoelasticity, tailored with an additive of inorganic Se82− polyanion, fabricating the designed topologies. The computational simulation and experimental measurement demonstrate the superior power output and mechanical stiffness of the proposed cellular thermoelectric architectures to other designs, unveiling the importance of topological designs of thermoelectric legs toward higher power and longer durability.

The use of fumed silica in printing inks

1986 ◽  
Vol 15 (1) ◽  
pp. 13-19 ◽  
Author(s):  
Dieter Riffel
Keyword(s):  
Fumed Silica ◽  
Printing Inks

Colorants in plastic applications

2020 ◽  
Vol 0 (0) ◽  
Author(s):  
Gerhard Pfaff
Keyword(s):  
Current Knowledge ◽  
Review Article ◽  
Important Application ◽  
Processing Method ◽  
Application Systems ◽  
Plastic Type ◽  
Printing Inks ◽  
Cosmetic Formulations ◽  
Plastics Processing ◽  
The Individual

AbstractThis review article is a summary of the current knowledge in the field of plastic coloring. Plastics belong as well as paints, coatings, printing inks, and cosmetic formulations to the most important application systems for colorants, both for pigments and dyes. Colorants have to meet increasing demands in plastic applications due to the growing number of polymers with specific properties. Crucial factors besides the plastic type are the processing method and the required fastness level. Among the most important polymers for coloring with pigments and dyes are polyolefins, polyvinyl chloride, polyurethane, polyamide, polycarbonate, polyester, and elastomers. Different processing methods are used for coloring of the individual plastics. The coloring processes need to be coordinated in accordance with the steps of the plastics processing leading to the final product.

Metal complex pigments

2021 ◽  
Vol 0 (0) ◽  
Author(s):  
Robert Christie ◽  
Adrian Abel
Keyword(s):  
Metal Complex ◽  
Metal Ion ◽  
Copper Phthalocyanine ◽  
Research Effort ◽  
Iron Complex ◽  
Organic Pigment ◽  
Organic Pigments ◽  
Printing Inks ◽  
Green Pigments ◽  
Complex Organic

Abstract There are several commercially significant metal complex organic pigments that are based on first row transition metals. The most important of these are the copper phthalocyanine blue and green pigments which find virtually universal use in paints, printing inks, and plastics. These pigments are of such prime importance that they are dealt with separately in three other chapters in this series. This paper describes a group of pigments that are complexes of iron, copper, nickel, and cobalt with polydentate colored ligands of azo, azomethine, oxime, and isoindoline chemical types. The oldest metal complex organic pigment that still finds some use is CI Pigment Green 8, an octahedral oxime iron complex. In the 1970s and 1980s, there was considerable industrial research effort aimed at developing metal complex pigments based on azomethine and isoindoline structures, many of which were found to offer excellent lightfastness, good solvent resistance and thermal stability, although they exhibited rather dull colors. However, several products provide brilliant effects when used in combination with metallic and pearlescent pigments in automotive paints. Many of the pigments introduced have since been withdrawn by the original manufacturers, but a few remain on the market. The synthesis of metal complex pigments generally involves the preparation of the colored ligand, which is then complexed with the transition metal ion

Sign in / Sign up

Export Citation Format

Share Document