Specification for continuously hot-dip lead alloy (terne) coated cold reduced carbon steel flat rolled products

Considerable effort has been directed toward an improved understanding of the production of the strong and stiff ∼ 1-20 μm diameter pyrolytic carbon fibers of the type reported by Koyama and, more recently, by Tibbetts. These macroscopic fibers are produced when pyrolytic carbon filaments (∼ 0.1 μm or less in diameter) are thickened by deposition of carbon during thermal decomposition of hydrocarbon gases. Each such precursor filament normally lengthens in association with an attached catalyst particle. The subject of filamentous carbon formation and much of the work on characterization of the catalyst particles have been reviewed thoroughly by Baker and Harris. However, identification of the catalyst particles remains a problem of continuing interest. The purpose of this work was to characterize the microstructure of the pyrolytic carbon filaments and the catalyst particles formed inside stainless steel and plain carbon steel tubes. For the present study, natural gas (∼; 97 % methane) was passed through type 304 stainless steel and SAE 1020 plain carbon steel tubes at 1240°K.

Download Full-text

Internal friction in a martensitic high-carbon steel

Philosophical Magazine A ◽

10.1080/01418610110049716 ◽

2001 ◽

Vol 81 (12) ◽

pp. 2797-2808

Author(s):

Rustem Bagramov, Daniele Mari, Willy Benoi

Keyword(s):

Carbon Steel ◽

Internal Friction ◽

High Carbon Steel ◽

High Carbon

Download Full-text

Development of trimming technology for hot rolled ultra-low carbon steel

Revue de Métallurgie ◽

10.1051/metal/199390070917 ◽

1993 ◽

Vol 90 (7-8) ◽

pp. 917-922

Author(s):

Y. Matsuda ◽

M. Nishino ◽

J. Ikeda

Keyword(s):

Carbon Steel ◽

Low Carbon Steel ◽

Low Carbon ◽

Ultra Low Carbon Steel ◽

Hot Rolled

Download Full-text

INFLUENCE THE QUENCHING AND TEMPERING ON THE MICROSTRUCTURE, MECHANICAL PROPERTIES AND SURFACE ROUGHNESS, OF MEDIUM CARBON STEEL

THE IRAQI JOURNAL FOR MECHANICAL AND MATERIALS ENGINEERING ◽

10.32852/iqjfmme.vol18.iss1.78 ◽

2018 ◽

Vol 18 (1) ◽

pp. 125-135

Author(s):

Sattar H A Alfatlawi

Keyword(s):

Mechanical Properties ◽

Heat Treatment ◽

Surface Roughness ◽

Carbon Steel ◽

Cold Water ◽

Medium Carbon Steel ◽

Medium Carbon ◽

Heating And Cooling ◽

Treatment Processes ◽

Quenching And Tempering

One of ways to improve properties of materials without changing the product shape toobtain the desired engineering applications is heating and cooling under effect of controlledsequence of heat treatment. The main aim of this study was to investigate the effect ofheating and cooling on the surface roughness, microstructure and some selected propertiessuch as the hardness and impact strength of Medium Carbon Steel which treated at differenttypes of heat treatment processes. Heat treatment achieved in this work was respectively,heating, quenching and tempering. The specimens were heated to 850°C and left for 45minutes inside the furnace as a holding time at that temperature, then quenching process wasperformed in four types of quenching media (still air, cold water (2°C), oil and polymersolution), respectively. Thereafter, the samples were tempered at 200°C, 400°C, and 600°Cwith one hour as a soaking time for each temperature, then were all cooled by still air. Whenthe heat treatment process was completed, the surface roughness, hardness, impact strengthand microstructure tests were performed. The results showed a change and clearimprovement of surface roughness, mechanical properties and microstructure afterquenching was achieved, as well as the change that took place due to the increasingtoughness and ductility by reducing of brittleness of samples.

Download Full-text