Specification for E glass fibre chopped strand mat for the reinforcement of polyester resin systems

1973 ◽  
Keyword(s):  
Glass Fibre ◽  
Polyester Resin ◽  
Chopped Strand Mat

Quasi-Static Indentation Behaviour of Glass Fibre Reinforced Polymer

2014 ◽  
Vol 970 ◽  
pp. 317-319 ◽  
Author(s):  
Syed Mohd Saiful Azwan ◽  
Yahya Mohd Yazid ◽  
Ayob Amran ◽  
Behzad Abdi
Keyword(s):  
Glass Fibre ◽  
Polyester Resin ◽  
Loading Rates ◽  
Reinforced Polymer ◽  
Glass Fibre Reinforced Polymer ◽  
Static Indentation ◽  
Indentation Tests ◽  
Fibre Reinforced Polymer ◽  
Glass Fibre Reinforced ◽  
Chopped Strand Mat

Fibre reinforced polymer (FRP) plates subject to quasi-static indentation loading were studied. The plates were fabricated from three layers of chopped strand mat glass fibre and polyester resin using vacuum infusion process. Indentation tests were conducted on the plates with loading rates of 1 mm/min, 10 mm/min, 100 mm/min and 500 mm/min using a hemispherical tip indenter with diameter 12.5 mm. The plates were clamped in a square fixture with an unsupported space of 100 mm × 100 mm. The loads and deflections at the indented location were measured to give energy absorption-deflection curves. The results showed that the loading rate has a large effect on the indentation behaviour and energy absorbed.

Manufacture of Sheets Using Post-Consumer Unsaturated Polyester Resin/Glass Fibre Composites

2002 ◽  
Vol 18 (2) ◽  
pp. 111-125 ◽  
Author(s):  
A. G. Pedroso ◽  
D. S. Rosa ◽  
T. D. Z. Atvars
Keyword(s):  
Glass Fibre ◽  
Polyester Resin ◽  
Unsaturated Polyester ◽  
Impact Resistance ◽  
Weight Ratio ◽  
High Volume ◽  
Volume Weight ◽  
Fibre Composites ◽  
Powdered Composite ◽  
Resin Curing

The storage of post-consumer unsaturated polyester/glass fibre composites impacts negatively on the environment due to its persistence (long lifetime of both the glass fibre and the resin) as well as the high volume/weight ratio of the residues. In this work we introduce a new approach for the recycling process of artefacts made of these polyester/glass fibre composites that involves the dispersion of the ground, not powdered, composite in raw polyester resin. Room temperature resin curing was employed. Flexural and impact tests were performed to optimize the processing conditions and the manufacturing process. Significant improvement in texture, flexural strength and impact resistance of sheets were achieved by pressing and heating the sheets at 40∞C and 50∞C during curing. The artefacts utilized in our work were post-consumer public telephone weather protector caps, which, in Brazil, are manufactured with a composite of unsaturated polyester/glass fibre. Although we used this specific artefact, the methodology can be extended to different types of post-consumer materials or industrial scraps.

Sign in / Sign up

Export Citation Format

Share Document