scholarly journals Hydrodynamics and Free-Flow Characteristics of Piano Key Weirs with Different Plan Shapes

Water ◽  
2021 ◽  
Vol 13 (15) ◽  
pp. 2108
Author(s):  
Yousef Sangsefidi ◽  
Hassan Tavakol-Davani ◽  
Masoud Ghodsian ◽  
Mojtaba Mehraein ◽  
Reza Zarei
Keyword(s):  
Discharge Capacity ◽  
Flow Behavior ◽  
Flow Characteristics ◽  
Width Ratio ◽  
Body Volume ◽  
Reverse Trend ◽  
Wide Range ◽  
Magnification Ratio ◽  
High Head ◽  
Discharge Efficiency

This paper focuses on Piano Key Weirs (PKWs) as an effective solution for improving the discharge capacity of spillway systems. The flow behavior in inlet and outlet keys is experimentally studied to analyze the discharge capacity of PKWs with different plan shapes (i.e., rectangular, trapezoidal, and triangular). The results show that in outlet keys, the flow aeration regimes extend to higher values of headwater ratios (Ho/P) by increasing the length magnification ratio (B/w) and apex width ratio (A/w). In addition, the local submergence length is a decreasing function of A/w, especially in high flow heads. While the total interference length enlarges by reducing A/w in lower Ho/P values (Ho/P < 0.5), a reverse trend is observed in higher headwater ratios. PKW performance may also be impacted by the flow contraction and recirculation zone in inlet keys, which intensify in higher values of Ho/P, B/w, and A/w. According to the obtained results, while the discharge coefficient is a decreasing function of A/w in Ho/P > 0.4, it may have a reverse trend in lower head conditions. In addition, a trapezoidal PKW has the highest discharge efficiency in a wide range of the studied domain (Ho/P > 0.25 and B/w ≥ 2). It can improve the discharge efficiency by around 5%, while its body volume is almost 7% smaller than the traditional rectangular PKW. However, for low-length and high-head conditions (B/w = 1 and Ho/P > 0.5), the efficiency a rectangular PKW exceeds that of the other shapes.

Design and Test of 300W, 65K Pulse Tube

2004 ◽  
Author(s):  
Seth A. Potratz ◽  
Gregory F. Nellis ◽  
James R. Maddocks ◽  
John M. Pfotenhauer
Keyword(s):  
Heat Exchanger ◽  
Flow Behavior ◽  
Flow Characteristics ◽  
Frequency Measurement ◽  
Operating Conditions ◽  
Design Model ◽  
Pulse Tube ◽  
Tube System ◽  
Pressure Flow ◽  
Wide Range

This paper describes the design and preliminary experimental results for a large capacity (300W at 65 K) single-stage, Stirling-type pulse-tube. The regenerator, the critical component in the pulse-tube, was optimized via a parametric study accomplished using the REGENv3.2 program. The pulse tube system was subsequently designed using a 1st order model that calculates the pressure-flow characteristics of the system coupled with 2nd order models of the various internal loss mechanisms. An experimental pulse-tube system was fabricated based on this design; the pulse-tube apparatus allows simultaneous, high frequency measurement of instantaneous compressor piston position as well the instantaneous pressures at various locations in the system. In addition, the average temperatures along the regenerator, within the cold heat exchanger gas volume, on the cold heat exchanger surface, and along the pulse-tube are measured. This comprehensive set of measurements will allow a thorough evaluation and verification of the design model over a wide range of operating conditions including compressor stroke, frequency, charge pressure, and load temperature. This paper presents some preliminary experimental progress and compares the measured pressure-flow behavior with the design model predictions.

URBAN FACADE GEOMETRY ON OUTDOOR COMFORT CONDITIONS: A REVIEW

2020 ◽  
Vol 4 (1) ◽  
pp. 45
Author(s):  
Elahe Mirabi ◽  
Nasrollahi Nazanin
Keyword(s):  
Thermal Comfort ◽  
Urban Areas ◽  
Natural Ventilation ◽  
Flow Behavior ◽  
Air Flow ◽  
Urban Geometry ◽  
Wide Range ◽  
Low Energy Buildings ◽  
Outdoor Comfort ◽  
Solar Access

<p>Designing urban facades is considered as a major factor influencing issues<br />such as natural ventilation of buildings and urban areas, radiations in the<br />urban canyon for designing low-energy buildings, cooling demand for<br />buildings in urban area, and thermal comfort in urban streets. However, so<br />far, most studies on urban topics have been focused on flat facades<br />without details of urban layouts. Hence, the effect of urban facades with<br />details such as the balcony and corbelling on thermal comfort conditions<br />and air flow behavior are discussed in this literature review. <strong>Aim</strong>: This<br />study was carried out to investigate the effective factors of urban facades,<br />including the effects of building configuration, geometry and urban<br />canyon’s orientation. <strong>Methodology and Results</strong>: According to the results,<br />the air flow behavior is affected by a wide range of factors such as wind<br />conditions, urban geometry and wind direction. Urban façade geometry<br />can change outdoor air flow pattern, thermal comfort and solar access.<br /><strong>Conclusion, significance and impact study</strong>: In particular, the geometry of<br />the facade, such as indentation and protrusion, has a significant effect on<br />the air flow and thermal behavior in urban facades and can enhance<br />outdoor comfort conditions. Also, Alternation in façade geometry can<br />affect pedestrians' comfort and buildings energy demands.</p>

scholarly journals Diversity of Pod Shape in Pisum

Diversity ◽  
2021 ◽  
Vol 13 (5) ◽  
pp. 203
Author(s):  
Thomas Henry Noel Ellis ◽  
Julie M. I. Hofer ◽  
Eleni Vikeli ◽  
Michael J. Ambrose ◽  
Paola Higuera-Poveda ◽  
...  
Keyword(s):  
Allelic Variation ◽  
Size Variation ◽  
Width Ratio ◽  
Negative Regulators ◽  
Wide Range ◽  
Yield Determination ◽  
Organ Specific ◽  
Length Width ◽  
End Use ◽  
Pod Length

The seed-containing pod is the defining structure of plants in the legume family, yet pods exhibit a wide range of morphological variation. Within a species pod characters are likely to be correlated with reproductive strategy, and within cultivated forms will correspond to aspects of yield determination and/or end use. Here variation in pod size, described as pod length: pod width ratio, has been analyzed in pea germplasm represented by 597 accessions. This pod size variation is discussed with respect to population structure and to known classical pod morphology mutants. Variability of the pod length: width ratio can be explained by allelic variation at two genetic loci that may correspond to organ-specific negative regulators of growth.

Energy-minimization multiscale based mesoscale modeling and applications in gas-fluidized catalytic reactors

2019 ◽  
Vol 35 (8) ◽  
pp. 879-915 ◽  
Author(s):  
Bona Lu ◽  
Yan Niu ◽  
Feiguo Chen ◽  
Nouman Ahmad ◽  
Wei Wang ◽  
...  
Keyword(s):  
Energy Minimization ◽  
Fluid Model ◽  
Scale Up ◽  
Flow Characteristics ◽  
Chemical Kinetic ◽  
Mesoscale Modeling ◽  
Catalytic Reactors ◽  
Chemical Kinetic Model ◽  
Starting Point ◽  
Wide Range

Abstract Gas-solid fluidization is intrinsically dynamic and manifests mesoscale structures spanning a wide range of length and timescales. When involved with reactions, more complex phenomena emerge and thus pose bigger challenges for modeling. As the mesoscale is critical to understand multiphase reactive flows, which the conventional two-fluid model without mesoscale modeling may be inadequate to resolve even using extremely fine grids, this review attempts to demonstrate that the energy-minimization multiscale (EMMS) model could be a starting point to develop such mesoscale modeling. Then, the EMMS-based mesoscale modeling with emphasis on formulation of drag coefficients for different fluidization regimes, modification of mass transfer coefficient, and other extensions are discussed in an attempt to resolve the emerging challenges. Its applications with examples of development of novel fluid catalytic cracking and methanol-to-olefins processes prove that the mesoscale modeling plays a remarkable role in improving the predictions in hydrodynamic behaviors and overall reaction rate. However, the product content primarily depends on the chemical kinetic model itself, suggesting the necessity of an effective coupling between chemical kinetics and flow characteristics. The mesoscale modeling can be believed to accelerate the traditional experimental-based scale-up process with much lower cost in the future.

Study of Gas Flow in Micronozzles Using an Unstructured DSMC Method

2009 ◽  
Author(s):  
Ehsan Roohi ◽  
Masoud Darbandi ◽  
Vahid Mirjalili
Keyword(s):  
Boundary Layer ◽  
Knudsen Number ◽  
Gas Flow ◽  
Subsonic Flow ◽  
Flow Behavior ◽  
Boundary Layer Separation ◽  
Back Pressure ◽  
Viscous Force ◽  
Dsmc Method ◽  
Wide Range

The current research uses an unstructured direct simulation Monte Carlo (DSMC) method to numerically investigate supersonic and subsonic flow behavior in micro convergent–divergent nozzle over a wide range of rarefied regimes. The current unstructured DSMC solver has been suitably modified via using uniform distribution of particles, employing proper subcell geometry, and benefiting from an advanced molecular tracking algorithm. Using this solver, we study the effects of back pressure, gas/surface interactions (diffuse/specular reflections), and Knudsen number, on the flow field in micronozzles. We show that high viscous force manifesting in boundary layers prevents supersonic flow formation in the divergent section of nozzles as soon as the Knudsen number increases above a moderate magnitude. In order to accurately simulate subsonic flow at the nozzle outlet, it is necessary to add a buffer zone to the end of nozzle. If we apply the back pressure at the outlet, boundary layer separation is observed and a region of backward flow appears inside the boundary layer while the core region of inviscid flow experiences multiple shock-expansion waves. We also show that the wall boundary layer prevents forming shocks in the divergent part. Alternatively, Mach cores appear at the nozzle center followed by bow shocks and an expansion region.

scholarly journals Modelling of service reservoirs

2001 ◽  
Vol 3 (3) ◽  
pp. 165-172 ◽  
Author(s):  
Hoi Yeung
Keyword(s):  
Plug Flow ◽  
Flow Characteristics ◽  
Flow Distribution ◽  
Tracer Test ◽  
Computational Fluid Mechanics ◽  
Width Ratio ◽  
Dual Function ◽  
Water Age ◽  
Reactor Model ◽  
Increased Risk

Service reservoirs were built to provide the dual function of balancing supply with demand and provision of adequate head to maintain pressure throughout the distribution network. Changing demographics in the UK and reducing leakage have led to significant increases in water age and hence increased risk of poor water quality. Computational fluid mechanics has been used to study the behaviour of a range of service reservoirs with a rectangular plan form. Detailed analysis of flow distribution and water age suggests that tanks with horizontal inlets are better mixed when compared with vertical top water level inlets. With increasing length to width ratio, the flow characteristics of tanks with vertical inlets increasingly resemble plug flow. A new multi-channel reactor model was developed to model the recirculations in service reservoirs. This simple model can be used to characterise the flow characteristics of service reservoirs from tracer test results.

Performance of rectangular labyrinth weir- an experimental and numerical study

2022 ◽  
Author(s):  
Mosbah Ben Said ◽  
Ahmed Ouamane
Keyword(s):  
Discharge Capacity ◽  
Numerical Study ◽  
Flow Behavior ◽  
Rectangular Channel ◽  
Experimental Models ◽  
Absolute Relative Error ◽  
Labyrinth Weir ◽  
Specific Discharge ◽  
Labyrinth Weirs ◽  
Good Agreement

Abstract Labyrinth weirs are commonly used to increase the capacity of existing spillways and provide more efficient spillways for new dams due to their high specific discharge capacity compared to the linear weir. In the present study, experimental and numerical investigation was conducted to improve the rectangular labyrinth weir performance. In this context, four configurations were tested to evaluate the influence of the entrance shape and alveoli width on its discharge capacity. The experimental models, three models of rectangular labyrinth weir with rounded entrance and one with flat entrance, were tested in rectangular channel conditions for inlet width to outlet width ratios (a/b) equal to 0.67, 1 and 1.5. The results indicate that the rounded entrance increases the weir efficiency by up to 5%. A ratio a/b equal to 1.5 leads to an 8 and 18% increase in the discharge capacity compared to a/b ratio equal to 1 and 0.67, respectively. In addition, a numerical simulation was conducted using the opensource CFD OpenFOAM to analyze and provide more information about the flow behavior over the tested models. A comparison between the experimental and numerical discharge coefficient was performed and good agreement was found (Mean Absolute Relative Error of 4–6%).

Prediction of High Viscosity Liquid/Gas Two-Phase Slug Length in Horizontal and Slightly Inclined Pipelines

2021 ◽  
Author(s):  
Omar Shaaban ◽  
Eissa Al-Safran
Keyword(s):  
Numerical Optimization ◽  
Flow Behavior ◽  
Mechanistic Model ◽  
High Viscosity ◽  
Oil Well ◽  
Liquid Slug ◽  
Two Phase ◽  
Proposed Model ◽  
Wide Range ◽  
Flow Closure

Abstract The production and transportation of high viscosity liquid/gas two-phase along petroleum production system is a challenging operation due to the lack of understanding the flow behavior and characteristics. In particular, accurate prediction of two-phase slug length in pipes is crucial to efficiently operate and safely design oil well and separation facilities. The objective of this study is to develop a mechanistic model to predict high viscosity liquid slug length in pipelines and to optimize the proper set of closure relationships required to ensure high accuracy prediction. A large high viscosity liquid slug length database is collected and presented in this study, against which the proposed model is validated and compared with other models. A mechanistic slug length model is derived based on the first principles of mass and momentum balances over a two-phase slug unit, which requires a set of closure relationships of other slug characteristics. To select the proper set of closure relationships, a numerical optimization is carried out using a large slug length dataset to minimize the prediction error. Thousands of combinations of various slug flow closure relationships were evaluated to identify the most appropriate relationships for the proposed slug length model under high viscosity slug length condition. Results show that the proposed slug length mechanistic model is applicable for a wide range of liquid viscosities and is sensitive to the selected closure relationships. Results revealed that the optimum closure relationships combination is Archibong-Eso et al. (2018) for slug frequency, Malnes (1983) for slug liquid holdup, Jeyachandra et al. (2012) for drift velocity, and Nicklin et al. (1962) for the distribution coefficient. Using the above set of closure relationships, model validation yields 37.8% absolute average percent error, outperforming all existing slug length models.

NUMERICAL ANALYSIS OF FLOW BEHAVIOR IN GAS-LIQUID CYLINDRICAL CYCLONE (GLCC©*) SEPARATORS WITH INLET DESIGN MODIFICATIONS

2021 ◽  
pp. 1-27
Author(s):  
Srinivas Swaroop Kolla ◽  
Ram S. Mohan ◽  
Ovadia Shoham
Keyword(s):  
Numerical Study ◽  
Flow Behavior ◽  
Low Cost ◽  
Field Application ◽  
Attractive Alternative ◽  
Inlet Section ◽  
Wide Range ◽  
Cylindrical Cyclone ◽  
Light Oil ◽  
Section Design

Abstract The Gas-Liquid Cylindrical Cyclone (GLCC©*) is a simple, compact and low-cost separator, which provides an economically attractive alternative to conventional gravity-based separators over a wide range of applications. More than 6,500 GLCC©'s have been installed in the field to date around the world over the past 2 decades. The GLCC© inlet section design is a key parameter, which is crucial for its performance and proper operation. The flow behavior in the GLCC© body is highly dependent on the fluid velocities generated at the reduced area nozzle inlet. An earlier study (Kolla et al. [1]) recommended design modifications to the inlet section, based on safety and structural robustness. It is important to ensure that these proposed configuration modifications do not adversely affect the flow behavior at the inlet and the overall performance of the GLCC©. This paper presents a numerical study utilizing specific GLCC© field application working under 3 different case studies representing the flow entering the GLCC, separating light oil, steam flooded wells in Minas, Indonesia. Commercially available Computational Fluid Dynamics (CFD) software is utilized to analyze the hydrodynamics of flow with the proposed modifications of the inlet section for GLCC© field applications.

Rheo-Optics Studies in the Development of Hybrid Liquid Crystalline Based Mwir Polarizers

1999 ◽  
Vol 559 ◽  
Author(s):  
P.T. Mather ◽  
W. Barnes ◽  
P.J. Hood ◽  
T.J. Bunning
Keyword(s):  
Liquid Crystalline ◽  
Flow Behavior ◽  
Optical Microscope ◽  
Processing Technique ◽  
Strain Rates ◽  
Alignment Layer ◽  
Small Pitch ◽  
Wide Range ◽  
Measured Polarization ◽  
Free Films

ABSTRACTWe present here a rheo-optical study of the flow behavior of two cholesteric liquid crystals, one with a large pitch and one with a small pitch. The large pitch compound has been investigated as a possible fixed wavelength polarizer in the mid-wavelength infra-red region (3-5 micron). The investigation of these compounds is driven by their low melt viscosity and ability to vitrify order, and thus functionality, into films with a wide range of thickness. In our attempts to obtain consistent thin films with reproducible contrast ratios, we explored the defect textures of both compounds under a polarizing optical microscope. These materials were sheared at various strain rates and at various temperatures in an attempt to determine the best processing window for defect free films. The pitch lengths of the two materials investigated were 160 and 1330 nm. The flow behavior of the large pitch material resembles a pure nematic with defect refinement taking place under flow. The short pitch material exhibited the typical Grandjean oily streaks upon shearing followed by coarsening. Observations made during this rheological study were used to identify a processing technique for the large pitch materials. Upon application of a conventional buffed alignment layer, films with consistent quality were routinely made. The measured polarization contrast of >70:1 exceeds the values obtained from state-of-the art commercial polarizers in this wavelength regime.

Sign in / Sign up

Export Citation Format

Share Document