scholarly journals Mediterranean and Black Sea Monstrilloid Copepods (Copepoda: Monstrilloida): Rediscovering the Diversity of Transient Zooplankters

Water ◽  
2021 ◽  
Vol 13 (8) ◽  
pp. 1036
Author(s):  
Eduardo Suárez-Morales ◽  
Mark J. Grygier
Keyword(s):  
Life Cycles ◽  
Second Phase ◽  
Nominal Species ◽  
Widespread Species ◽  
Third Phase ◽  
Taxonomic Descriptions ◽  
True Diversity ◽  
Species Groups ◽  
Mediterranean And Black Seas ◽  
Annotated Checklist

Monstrilloids are copepods that live freely in plankton without feeding but have parasitic immature stages that develop within infected benthic molluscs and polychaetes. Because of their incompletely known life cycles and the difficulty of matching conspecific males and females, it has been difficult to assess their true diversity anywhere on earth. The monstrilloid fauna of the Mediterranean and Black seas (MBS) has been investigated for over 140 years, during which time four phases of study can be recognized. The initial list of MBS monstrilloids recorded during the first phase (1877–1893) grew only slowly for decades afterwards during the second phase (1895–1952) because of patchy sampling and a dearth of formal taxonomic descriptions. The third phase (1957–1986) featured little new work at all. During the most recent fourth phase since 1992, a reappraisal with heed to nomenclatural rules and upgraded descriptive standards has led to the realization that many nominal species of MBS monstrilloids are invalid or doubtful. Furthermore, some that have been frequently recorded, such as Monstrilla grandis, Cymbasoma longispinosum, and C. rigidum, may actually be undescribed representatives of widespread species groups. We provide an updated annotated checklist of MBS monstrilloids that includes 21 supposedly valid nominal species or species-groups. This rather high regional diversity will likely grow if future zooplankton surveys in the highly heterogeneous and extensive coastal systems of the MBS pay due attention to this intriguing group of copepods.

PENERAPAN MODEL QUANTUM LEARNING UNTUK MENINGKATKAN HASIL BELAJAR AUTOCAD SISWA KELAS X TEKNIK PEMESINAN SMK NEGERI 1 STABAT

2013 ◽  
Vol 5 (1) ◽  
Author(s):  
Abdul Hasan Saragih
Keyword(s):  
Positive Response ◽  
Phase 1 ◽  
First Grade ◽  
Learning Model ◽  
Second Phase ◽  
Phase 2 ◽  
Phase 3 ◽  
The Third ◽  
Third Phase ◽  
Quantum Learning

This classroom research was conducted on the autocad instructions to the first grade of mechinary class of SMK Negeri 1 Stabat aiming at : (1) improving the student’ archievementon autocad instructional to the student of mechinary architecture class of SMK Negeri 1 Stabat, (2) applying Quantum Learning Model to the students of mechinary class of SMK Negeri 1 Stabat, arising the positive response to autocad subject by applying Quantum Learning Model of the students of mechinary class of SMK Negeri 1 Stabat. The result shows that (1) by applying quantum learning model, the students’ achievement improves significantly. The improvement ofthe achievement of the 34 students is very satisfactory; on the first phase, 27 students passed (70.59%), 10 students failed (29.41%). On the second phase 27 students (79.41%) passed and 7 students (20.59%) failed. On the third phase 30 students (88.24%) passed and 4 students (11.76%) failed. The application of quantum learning model in SMK Negeri 1 Stabat proved satisfying. This was visible from the activeness of the students from phase 1 to 3. The activeness average of the students was 74.31% on phase 1,81.35% on phase 2, and 83.63% on phase 3. (3) The application of the quantum learning model on teaching autocad was very positively welcome by the students of mechinary class of SMK Negeri 1 Stabat. On phase 1 the improvement was 81.53% . It improved to 86.15% on phase 3. Therefore, The improvement ofstudent’ response can be categorized good.

Mixed-Methods Evaluation as Scaffold to the Development of a Mobile Health Application to Support the Prescription of Wheelchairs and Postural Support Devices (Preprint)

2020 ◽  
Author(s):  
Adriana Klein ◽  
Roseli de Deus Lopes ◽  
Rodrigo Suigh
Keyword(s):  
Mixed Methods ◽  
Mobile Health ◽  
Second Phase ◽  
The Third ◽  
Evaluation Approach ◽  
Mixed Methods Evaluation ◽  
Usability Tests ◽  
Third Phase ◽  
Postural Support ◽  
Support Devices

BACKGROUND EasySeating is a mobile health (mHealth) app that supports the prescription of wheelchair and postural support devices (WPSD). It can be used by occupational therapists (OT) and physiotherapists (PT) who prescribe WPSD. The app offers a standardization of the prescription procedure, showing images, metrics and details that guide the prescriber to decide on the best equipment. It was developed with an iterative mixed-methods evaluation approach. Objective: The aim of this study was to investigate the processes involved in the prescription of WPSD and to propose, develop and evaluate a mHealth to support OT and PT prescribers. OBJECTIVE The aim of this study was to investigate the processes involved in the prescription of WPSD and to propose, develop and evaluate a mHealth to support OT and PT prescribers. METHODS This study was divided into three phases and was carried out as an iterative process composed of user consulting/testing (using a mixed-methods evaluation approach), system (re)design and software development. The first phase consisted of the collection of qualitative and quantitative data to map and understand the users requirements and of the development of the first prototype (v1) of the app. This data collection was performed through semi-structured interviews with 14 OT and PT prescribers, 5 specialized technicians and 5 WPSD users. The second phase aimed at improving the overall functionality of the app and consisted in the development, test and evaluation of the prototypes v1, v2, v3 and v4. A total of 59 prescribers tested and evaluated these prototypes by means of open interviews, semi-structured questionnaires and focus groups. The third phase focused in the usability aspects of the app. It consisted in the development and test of the prototype v5. Eight technology specialists assessed its usability through heuristics evaluation. RESULTS Data collected in phase one indicated there is a lack of standardization on the prescription of postural support devices (PSD). A divergent nomenclature for the PSDs was also found and classified in eight categories. These information guided the development of the first prototype of the EasySeating app. Phase two results pointed that the prescribers value the insertion of the app into their clinical practice, as it accelerates and increases the quality of the evaluation process and improves the organization of the prescription information. Significant suggestions for the improvement of the app were given during the users tests, including the use of images to represent the PSDs. The usability tests from the third phase revealed two strong issues that must be solved: the need of greater feedback and failures in the persistence of the input data. CONCLUSIONS This study demonstrated that there is a lack of systematization of the WPSD prescription process. The evaluation of the developed EasySeating app demonstrated that there is a potential to standardize, integrate and organize the WPSD prescription information, supporting and facilitating the decision making process of the prescribers. CLINICALTRIAL This study was approved by the Research Ethics Board of the Universidade de São Paulo (registered protocol n°53929516.6.0000.0065) URL - http://plataformabrasil.saude.gov.br/login.jsf

Foucault as Superauthor

2019 ◽  
Vol 29 (2) ◽  
pp. 104-125
Keyword(s):  
Free Speech ◽  
Second Phase ◽  
Contemporary Society ◽  
Sovereign Power ◽  
Ancient Greek ◽  
Main Motivation ◽  
Critical Attitude ◽  
The Third ◽  
Third Phase ◽  
Lecture Courses

Three phases in Foucault’s examination of authorship and free speech were essential to him throughout his life. They can be linked to such texts as the three lectures “What is an Author?” (first phase), “What is Critique?,” and “What is Revolution?” (second phase), and the two lecture courses, “Fearless Speech,” and “The Courage of Truth” (third phase). Initially, Foucault merely describes the founders of discursivity (hence, “superauthors”), among whom he reckoned only Marx and Freud, as the sole alternative to his own conceptualization of the author function, which is exhibited en masse in contemporary society. He then modifies his views on superauthorship by making Kant the paradigm and by linking his own concept of free speech to a Kan-tian critical attitude. However, Foucault claims only the half of Kant’s philosophical legacy that is related to the study of the ontology of the self.The article advances the hypothesis that the sovereign power of speech, which can be found in Marx and Heidegger and in generally in the concept of “superauthorship,” becomes unacceptable for Foucault. During the third phase, the danger of a tyrannical use of free speech compels Foucault to make a number of fruitful but questionable choices in his work. He focuses on a single aspect of free speech in which a speaker is in a weaker position and therefore has to overcome his fear in order to tell the truth. Foucault associates this kind of free speech with the ancient Greek notion of parrhesia, which according to his interpretation means “fearless speech”; however, this reading is not always supported by the ancient Greek sources. Foucault’s deliberations bring him to the radical conclusion that free speech transforms into performative “aesthetics of existence.” Foucault’s main motivation for pursuing this line of thought all through his life was to investigate his own abilities and powers as an author

scholarly journals Structural and Thermodynamic Analysis of the Resistance Development to Pimodivir (VX-787), the Clinical Inhibitor of Cap Binding to PB2 Subunit of Influenza A Polymerase

Molecules ◽  
2021 ◽  
Vol 26 (4) ◽  
pp. 1007
Author(s):  
Jiří Gregor ◽  
Kateřina Radilová ◽  
Jiří Brynda ◽  
Jindřich Fanfrlík ◽  
Jan Konvalinka ◽  
...  
Keyword(s):  
Thermodynamic Analysis ◽  
Influenza A ◽  
Polymerase Activity ◽  
Second Phase ◽  
Missense Mutations ◽  
Wild Type ◽  
Resistance Development ◽  
Third Phase ◽  
Major Mutation ◽  
Control And Prevention

Influenza A virus (IAV) encodes a polymerase composed of three subunits: PA, with endonuclease activity, PB1 with polymerase activity and PB2 with host RNA five-prime cap binding site. Their cooperation and stepwise activation include a process called cap-snatching, which is a crucial step in the IAV life cycle. Reproduction of IAV can be blocked by disrupting the interaction between the PB2 domain and the five-prime cap. An inhibitor of this interaction called pimodivir (VX-787) recently entered the third phase of clinical trial; however, several mutations in PB2 that cause resistance to pimodivir were observed. First major mutation, F404Y, causing resistance was identified during preclinical testing, next the mutation M431I was identified in patients during the second phase of clinical trials. The mutation H357N was identified during testing of IAV strains at Centers for Disease Control and Prevention. We set out to provide a structural and thermodynamic analysis of the interactions between cap-binding domain of PB2 wild-type and PB2 variants bearing these mutations and pimodivir. Here we present four crystal structures of PB2-WT, PB2-F404Y, PB2-M431I and PB2-H357N in complex with pimodivir. We have thermodynamically analysed all PB2 variants and proposed the effect of these mutations on thermodynamic parameters of these interactions and pimodivir resistance development. These data will contribute to understanding the effect of these missense mutations to the resistance development and help to design next generation inhibitors.

scholarly journals Hand Surgery in Thailand

2021 ◽  
Vol 13 (01) ◽  
pp. 35-41
Author(s):  
Sunyarn Niempoog ◽  
Kiat Witoonchart ◽  
Woraphon Jaroenporn
Keyword(s):  
World War Ii ◽  
Traffic Accidents ◽  
Hand Surgery ◽  
Vital Role ◽  
Second Phase ◽  
World War ◽  
Third Phase ◽  
Foreign Countries ◽  
General Surgeons ◽  
Set Up

AbstractModern hand surgery in Thailand started after the end of World War II. It is divided into 4 phases. In the initial phase (1950-1965), the surgery of the hand was mainly performed by general surgeons. In 1965-1975, which was the second phase, many plastic surgeons and orthopaedic surgeons graduated from foreign countries and came back to Thailand. They played a vital role in the treatment of the surgery of the hand and set up hand units in many centers. They also contributed to the establishment of the “Thai Society for Surgery of the Hand,” which still continues to operate. In the third phase (1975-2000), there was a dramatic development of microsurgery because of the rapid economic expansion. There were many replantation, free tissue transfers, and brachial plexus surgeries in traffic and factory-related accidents. The first hand-fellow training program began in 1993. In the fourth phase (since 2000), the number of hand injuries from factory-related accidents began declining. But the injury from traffic accidents had been increasing both in severity and number. Moreover, the diseases of hand that relate to aging and degeneration had been on the rise. Thai hand surgeons have been using several state-of-the-art technologies such as arthroscopic and endoscopic surgery. They are continuing to invent innovations, generating international publications, and frequently being invited as speakers in foreign countries.

scholarly journals The Genus Plagiothecium Schimp. (Plagiotheciaceae, Bryophyta) in Eurasia: An Annotated Checklist with Distribution and Ecological Data

Plants ◽  
2021 ◽  
Vol 10 (5) ◽  
pp. 868
Author(s):  
Grzegorz J. Wolski ◽  
Samar Nour-El-Deen ◽  
Alicja Cienkowska ◽  
Daniel Bożyk ◽  
Wagieh El-Saadawi
Keyword(s):  
Relevant Literature ◽  
Single Species ◽  
Future Research ◽  
Ecological Data ◽  
Widespread Species ◽  
Entire Study ◽  
Distribution Maps ◽  
Sectional Classification ◽  
Pleurocarpous Moss ◽  
Annotated Checklist

An annotated checklist of the pleurocarpous moss genus Plagiothecium in Eurasia is presented for the first time based on a thorough review of the literature. Data have been compiled from previous relevant works conducted on the genus over more than 70 years and published up to the end of June 2020 for 107 Eurasian countries (and islands). Sectional classification is based on molecular phylogeny of the genus published recently. A total of 41 taxa are reported, including 29 species and 12 infraspecific taxa (nine varieties and three forms) belonging to eight sections. The highest numbers of taxa were found in China (20 taxa), the Russian Federation (20 taxa) and Japan (18 taxa), while the smallest numbers of taxa were recorded in the Middle East, Central Asia and the islands area. Not a single species of Plagiothecium was recorded in 26 regions, whereas P. denticulatum, P. nemorale and P. cavifolium turned out to be the most widespread species in the entire study area. They were recorded in most of the surveyed countries and islands. For each accepted taxon, information on relevant literature, synonyms, distribution within Eurasia and globally are provided. Comments on each taxon, ecological preferences, and notes on doubtful records are also included. Additionally, distribution maps for each recognised taxon are supplied. This checklist can enlighten and foster a better understanding of the distribution, diversity, and ecology of Plagiothecium in Eurasia and provides an incentive for future research on the genus.

Checklist of the cestode parasites of wild birds of Argentina

2021 ◽  
Vol 95 ◽  
Author(s):  
F.B. Drago ◽  
M. Dueñas Díaz ◽  
R. Draghi ◽  
V. Núñez
Keyword(s):  
Geographical Distribution ◽  
Wild Birds ◽  
Nominal Species ◽  
Generic Level ◽  
The Family ◽  
Host Parasite ◽  
Annotated Checklist

Abstract An annotated checklist of the cestode parasites of Argentinean wild birds is presented, as the result of a compilation of parasitological papers published between 1900 and April 2021. This review provides data on hosts, geographical distribution, sites of infection, location of material deposited in helminthological collections, references and taxonomic comments. A host/parasite list is also provided. During this period, 38 papers were published that gather information about 34 cestode nominal species and 11 taxa identified at generic level, belonging to three orders, ten families and 35 genera. The highest number of cestode taxa was recorded in the family Hymenolepididae, with 12 nominal species and two taxa identified at generic level, followed by Dilepididae, with eight nominal species and three taxa identified at generic level. Of the 1042 species of birds reported in Argentina, only 29 (2.8%) were reported as hosts of adult cestodes. The families of birds with the highest number of reported taxa were Laridae and Anatidae, with 20 and 14 taxa, respectively.

scholarly journals Resolving international border disputes: The Irish experience

2017 ◽  
Vol 52 (3) ◽  
pp. 377-398 ◽  
Author(s):  
John Coakley
Keyword(s):  
Northern Ireland ◽  
Specific Model ◽  
Second Phase ◽  
Territorial Dispute ◽  
Civil Unrest ◽  
Good Friday ◽  
The United Kingdom ◽  
Third Phase ◽  
The Uk ◽  
International Border

This article explores the value of a specific model of norm replacement in accounting for the circumstances leading to Ireland’s Good Friday agreement (1998), which formally and finally settled the long-running territorial dispute between Ireland and the United Kingdom (UK). Drawing on the theoretical literature, it identifies three phases in this process. First, from the creation of the Irish Free State in 1922 until the civil unrest in Northern Ireland peaked in 1972 the irredentist norm was substantially unchallenged. It was embedded in the 1937 constitution, which defined the national territory as extending over the whole island of Ireland – including Northern Ireland, a part of the UK. The second phase, from about 1972 to 1998, was one of norm competition. The irredentist norm was severely challenged by new political realities in Northern Ireland, and was potentially destabilising for the state itself. It was increasingly challenged by an alternative ‘consent’ norm, one embracing in effect the geopolitical status quo. The third phase, from 1998 onwards, was one of consolidation of the new norm, now written into the Irish constitution to replace the wording of 1937. The article suggests that this model plays a valuable role in accounting for the changing status of the Irish border, but also that the Irish experience has implications for the broad shape of the model.

scholarly journals Construction and validation of competency frameworks for the training of nurses in emergencies

2018 ◽  
Vol 26 (0) ◽  
Author(s):  
Fernanda Berchelli Girão Miranda ◽  
Alessandra Mazzo ◽  
Gerson Alves Pereira-Junior
Keyword(s):  
Delphi Technique ◽  
Second Phase ◽  
Content Validation ◽  
Third Phase ◽  
Competency Frameworks ◽  
The Face ◽  
Practical Development ◽  
Approach Method ◽  
The Subject ◽  
Final Agreement

ABSTRACT Objective: to build and validate competency frameworks to be developed in the training of nurses for the care of adult patients in situations of emergency with a focus on airway, breathing and circulation approach. Method: this is a descriptive and methodological study that took place in three phases: the first phase consisted in a literature review and a workshop involving seven experts for the creation of the competency frameworks; in the second phase, 15 experts selected through the Snowball Technique and Delphi Technique participated in the face and content validation, with analysis of the content of the suggestions and calculation of the Content Validation Index to assess the agreement on the representativeness of each item; in the third phase, 13 experts participated in the final agreement of the presented material. Results: the majority of the experts were nurses, with graduation and professional experience in the theme of the study. Competency frameworks were developed and validated for the training of nurses in the airway, breathing and circulation approach. Conclusion: the study made it possible to build and validate competency frameworks. We highlight its originality and potentialities to guide teachers and researchers in an efficient and objective way in the practical development of skills involved in the subject approached.

Evaluation of ecotourism sites: a GIS-based multi-criteria decision analysis

Kybernetes ◽  
2018 ◽  
Vol 47 (8) ◽  
pp. 1664-1686 ◽  
Author(s):  
Cihan Çetinkaya ◽  
Mehmet Kabak ◽  
Mehmet Erbaş ◽  
Eren Özceylan
Keyword(s):  
Black Sea ◽  
Real Data ◽  
The Black Sea ◽  
Second Phase ◽  
Content Type ◽  
Black Sea Region ◽  
Evaluation Approach ◽  
Third Phase ◽  
Proposed Model ◽  
Promethee Method

Purpose The aim of this study is to evaluate the potential geographic locations for ecotourism activities and to select the best one among alternatives. Design/methodology/approach The proposed model consists of four sequential phases. In the first phase, different geographic criteria are determined based on existing literature, and data are gathered using GIS. On equal criteria weighing, alternative locations are determined using GIS in the second phase. In the third phase, the identified criteria are weighted using analytical hierarchy process (AHP) by various stakeholders of potential ecotourism sites. In the fourth phase, the PROMETHEE method is applied to determine the best alternative based on the weighted criteria. Findings A framework including four sequential steps is proposed. Using real data from the Black Sea region in Turkey, the authors test the applicability of the evaluation approach and compare the best alternative obtained by the proposed method for nine cities in the region. Consequently, west of Sinop, east of Artvin and south of the Black Sea region are determined as very suitable locations for ecotourism. Research limitations/implications The first limitation of the study is considered the number of included criteria. Another limitation is the use of deterministic parameters that do not cope with uncertainty. Further research can be conducted for determining the optimum locations for different types of tourism, e.g. religion tourism, hunting tourism and golf tourism, for effective tourism planning. Practical implications The proposed approach can be applied to all area that cover the considered criteria. The approach has been tested in the Black Sea region (nine cities) in Turkey. Social implications Using the proposed approach, decision-makers can determine locations where environmentally responsible travel to natural areas to enjoy and appreciate nature that promotes conservation have a low visitor impact and provide for beneficially active socioeconomic involvement of local individuals. Originality/value To the best knowledge of the authors, this is the first study which applies a GIS-based multi-criteria decision-making approach for ecotourism site selection.

Sign in / Sign up

Export Citation Format

Share Document