scholarly journals How Can We Make Pump and Treat Systems More Energetically Sustainable?

Water ◽  
2019 ◽  
Vol 12 (1) ◽  
pp. 67 ◽  
Author(s):  
Alessandro Casasso ◽  
Tiziana Tosco ◽  
Carlo Bianco ◽  
Arianna Bucci ◽  
Rajandrea Sethi
Keyword(s):  
Heat Exchange ◽  
Removal Efficiency ◽  
Discharge Rate ◽  
Low Cost ◽  
Contaminated Sites ◽  
Cooling Power ◽  
Low Carbon ◽  
Pump And Treat ◽  
Case Evaluation ◽  
Pumping Wells

Pump and treat (P&T) systems are still widely employed for the hydraulic containment of contaminated groundwater despite the fact that their usage is decreasing due to their high operational costs. A way to partially mitigate such costs, both in monetary and environmental terms, is to perform heat exchange (directly or with a heat pump) on the groundwater extracted by these systems, thus providing low-carbon and low-cost heating and/or cooling to buildings or industrial processes. This opportunity should be carefully evaluated in view of preserving (or even improving) the removal efficiency of the remediation process. Therefore, the heat exchange should be placed upstream or downstream of all treatments, or in an intermediate position, depending on the effect of water temperature change on the removal efficiency of each treatment step. This article provides an overview of such effects and is meant to serve as a starting reference for a case-by-case evaluation. Finally, the potentiality of geothermal use of P&T systems is assessed in the Italian contaminated Sites of National Interest (SIN), i.e., the 41 priority contaminated sites in Italy. At least 29 of these sites use pumping wells as hydraulic barriers or P&T systems. The total discharge rate treated by these plants exceeds 7000 m3/h and can potentially provide about 33 MW of heating and/or cooling power.

OUTOKUMPU MODA 410L/4003

Alloy Digest ◽  
2020 ◽  
Vol 69 (12) ◽  
Keyword(s):  
Stainless Steel ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Ferritic Stainless Steel ◽  
Low Cost ◽  
Heat Treating ◽  
Low Carbon ◽  
Alloy Steels ◽  
Corrosive Environments

Abstract Outokumpu Moda 410L/4003 is a weldable, extra low carbon, Cr-Ni, ferritic stainless steel that is best suited for mildly corrosive environments such as indoors, where the material is either not exposed to contact with water or gets regularly wiped dry, or outdoors, where some discoloration and superficial rusting are acceptable. It is a low-cost alternative to low-carbon non-alloy steels in certain applications. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-1330. Producer or source: Outokumpu Oyj.

scholarly journals Research on Blank Optimization Design Based on Low-Carbon and Low-Cost Blank Process Route Optimization Model

2021 ◽  
Vol 13 (4) ◽  
pp. 1929
Author(s):  
Yongmao Xiao ◽  
Wei Yan ◽  
Ruping Wang ◽  
Zhigang Jiang ◽  
Ying Liu
Keyword(s):  
Optimization Model ◽  
Optimization Design ◽  
Design Method ◽  
Low Cost ◽  
Route Optimization ◽  
Low Carbon ◽  
Multi Objective Optimization ◽  
Multi Objective ◽  
Blank Design ◽  
Process Route

The optimization of blank design is the key to the implementation of a green innovation strategy. The process of blank design determines more than 80% of resource consumption and environmental emissions during the blank processing. Unfortunately, the traditional blank design method based on function and quality is not suitable for today’s sustainable development concept. In order to solve this problem, a research method of blank design optimization based on a low-carbon and low-cost process route optimization is proposed. Aiming at the processing characteristics of complex box type blank parts, the concept of the workstep element is proposed to represent the characteristics of machining parts, a low-carbon and low-cost multi-objective optimization model is established, and relevant constraints are set up. In addition, an intelligent generation algorithm of a working step chain is proposed, and combined with a particle swarm optimization algorithm to solve the optimization model. Finally, the feasibility and practicability of the method are verified by taking the processing of the blank of an emulsion box as an example. The data comparison shows that the comprehensive performance of the low-carbon and low-cost multi-objective optimization is the best, which meets the requirements of low-carbon processing, low-cost, and sustainable production.

scholarly journals Enhanced catalytic ozonation of ibuprofen using a 3D structured catalyst with MnO2 nanosheets on carbon microfibers

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Guhankumar Ponnusamy ◽  
Hajar Farzaneh ◽  
Yongfeng Tong ◽  
Jenny Lawler ◽  
Zhaoyang Liu ◽  
...  
Keyword(s):  
Removal Efficiency ◽  
Active Sites ◽  
Low Cost ◽  
Three Dimensional ◽  
Industrial Applications ◽  
Catalytic Ozonation ◽  
Heterogeneous Catalytic ◽  
Structured Catalyst ◽  
Dimensional Network ◽  
Carbon Microfibers

AbstractHeterogeneous catalytic ozonation is an effective approach to degrade refractory organic pollutants in water. However, ozonation catalysts with combined merits of high activity, good reusability and low cost for practical industrial applications are still rare. This study aims to develop an efficient, stable and economic ozonation catalyst for the degradation of Ibuprofen, a pharmaceutical compound frequently detected as a refractory pollutant in treated wastewaters. The novel three-dimensional network-structured catalyst, comprising of δ-MnO2 nanosheets grown on woven carbon microfibers (MnO2 nanosheets/carbon microfiber), was synthesized via a facile hydrothermal approach. Catalytic ozonation performance of Ibuprofen removal in water using the new catalyst proves a significant enhancement, where Ibuprofen removal efficiency of close to 90% was achieved with a catalyst loading of 1% (w/v). In contrast, conventional ozonation was only able to achieve 65% removal efficiency under the same operating condition. The enhanced performance with the new catalyst could be attributed to its significantly increased available surface active sites and improved mass transfer of reaction media, as a result of the special surface and structure properties of this new three-dimensional network-structured catalyst. Moreover, the new catalyst displays excellent stability and reusability for ibuprofen degradation over successive reaction cycles. The facile synthesis method and low-cost materials render the new catalyst high potential for industrial scaling up. With the combined advantages of high efficiency, high stability, and low cost, this study sheds new light for industrial applications of ozonation catalysts.

scholarly journals Nanocomposite multilayer capacitors comprising BaTiO3@TiO2 and poly(vinylidene fluoride-hexafluoropropylene) for dielectric-based energy storage

2014 ◽  
Vol 04 (02) ◽  
pp. 1450009 ◽  
Author(s):  
Mojtaba Rahimabady ◽  
Li Lu ◽  
Kui Yao
Keyword(s):  
Energy Storage ◽  
Energy Density ◽  
Vinylidene Fluoride ◽  
Discharge Rate ◽  
Low Cost ◽  
Breakdown Field ◽  
High Discharge ◽  
High Discharge Rate ◽  
Poly Vinylidene Fluoride ◽  
Multilayer Capacitors

Multilayer dielectric capacitors were fabricated from nanocomposite precursor comprised of BaTiO 3@ TiO 2 core–shell nanosized particles and poly(vinylidene fluoride–hexafluoropropylene) (P(VDF–HFP)) polymer matrix (20 vol%). The multilayer capacitors showed very high discharge speed and high discharged energy density of around 2.5 J/cm3 at its breakdown field (~ 166 MV/m). The energy density of the nanocomposite multilayer capacitors was substantially higher than the energy density of commercially used power capacitors. Low cost, flexible structure, high discharge rate and energy density suggest that the nanocomposite multilayer capacitors are promising for energy storage applications in many power devices and systems.

scholarly journals Removal of Cyanide-Contaminated Water by Vetiver Grasses

2015 ◽  
Vol 9 (13) ◽  
pp. 252 ◽  
Author(s):  
Piyada Wachirawongsakorn ◽  
Tongsai Jamnongkan ◽  
Mohd Talib Latif
Keyword(s):  
Growth Rate ◽  
Survival Rate ◽  
Sri Lanka ◽  
Removal Efficiency ◽  
Water Samples ◽  
Low Cost ◽  
Contaminated Water ◽  
Vetiver Grass ◽  
Vetiveria Zizanioides ◽  
Concentration Levels

<p>Vetiver grass and it usages have been widely investigated in many researches as the preferred plant species due to its known efficiency, low cost, the ease of availability and spread. This research aimed to use four different vetiver grass (<em>Vetiveria zizanioides</em>) ecotypes to remove cyanide (CN<sup>-</sup>)-contaminated water for improve its quality. Growth capability, tolerance and removal efficiency were evaluated. The results showed that the vetiver grass had a 100% survival rate for one month after planting. Songkhlar3 had the longest leaves, followed by Surat-Thani, Sri Lanka and Monto, respectively. Root lengths of all ecotypes showed no significant differences (p ≤ 0.05). All vetiver grass ecotypes could potentially purify CN<sup>-</sup>-contaminated water at lower concentrations of ≤ 35 mg CN<sup>-</sup>/L. The Monto ecotype had the highest CN<sup>-</sup> removal efficiency at all CN<sup>-</sup> concentration levels, showing 100% CN<sup>-</sup> removal from the 5-45 mg CN<sup>-</sup>/L contaminated water samples within 2-5 weeks growth. The tolerance of vetiver grass to CN<sup>-</sup> was a more important factor than growth rate when selecting a vetiver grass ecotype for CN<sup>-</sup> phytoremediation.</p>

scholarly journals Numerical analysis of effects of an open-pit coal mine to groundwater

2019 ◽  
Vol 4 (2) ◽  
pp. 70-74
Author(s):  
Viktória Mikita ◽  
Balázs Kovács
Keyword(s):  
Numerical Analysis ◽  
Coal Mine ◽  
Cost Efficiency ◽  
Low Cost ◽  
Open Pit ◽  
Contaminated Sites ◽  
Coal Basin ◽  
Contaminant Plumes ◽  
Key Factor ◽  
Groundwater Regime

In this study we investigated the hydrogeological problems of an open-pit brown coal mine in the Borsod coal basin with Processing Modflow software. The coal mine is located in the valley of the Sajó-river with high transmissivity overburden layer where the traditional dewatering solutions were not encouraging due to inrush risks and low cost-efficiency. A new way of barrier forming was found out and numerically simulated to prove the efficiency of the solution. Since there are several contaminated sites in the surroundings it was a key factor to assure that the new mine dewatering technique has only a negligible effect on the groundwater regime that undisturbs the known contaminant plumes nearby.

scholarly journals Multivariate Optimization of Pb2+ Adsorption onto Ethiopian Low-Cost Odaracha Soil Using Response Surface Methodology

Molecules ◽  
2021 ◽  
Vol 26 (21) ◽  
pp. 6477
Author(s):  
Yohanis Birhanu ◽  
Seyoum Leta
Keyword(s):  
Central Composite Design ◽  
Response Surface ◽  
Removal Efficiency ◽  
Interaction Effect ◽  
Contact Time ◽  
Low Cost ◽  
Design Model ◽  
Lead Ions ◽  
Experimental Result ◽  
Central Composite

Lead pollution is a severe health concern for humankind. Utilizing water contaminated with lead can cause musculoskeletal, renal, neurological, and fertility impairments. Therefore, to remove lead ions, proficient, and cost-effective methods are imperative. In this study, the Odaracha soil which is traditionally used by the local community of the Saketa District was used as a novel low-cost technology to adsorb lead ions. Odaracha adsorbent was characterized by scanning electron microscopy and Fourier transform infrared spectroscopy. The adsorption process followed the batch adsorption experiment. The response surface method was implemented to derive the operating variables’ binary interaction effect and optimize the process. According to the study’s experimental result, at optimum experimental conditions Odaracha adsorbent removes 98.17% of lead ions. Based on the result of the central composite design model, the Pb2+ ion removal efficiency of Odaracha was 97.193%, indicating an insignificant dissimilarity of the actual and predicted results. The coefficient of determination (R2) for Pb2+ was 0.9454. According to the factors’ influence indicated in the results of the central composite design model, all individual factors and the interaction effect between contact time and pH has a significant positive effect on lead adsorption. However, other interaction effects (contact time with dose and pH with dose) did not significantly influence the removal efficiency of lead ions. The adsorption kinetics were perfectly fitted with a pseudo-second-order model, and the adsorption isotherm was well fitted with the Freundlich isotherm model. In general, this study suggested that Odaracha adsorbent can be considered a potential adsorbent to remove Pb2+ ions and it is conceivable to raise its effectiveness by extracting its constituents at the industrial level.

scholarly journals Electrochemical redox treatment of denitrification in coastal secondary effluent using Ti/IrO2 anode

2021 ◽  
Author(s):  
Yaozong Zhang ◽  
Bo Pang
Keyword(s):  
Removal Efficiency ◽  
Treatment Plant ◽  
Chloride Ion ◽  
Ion Concentration ◽  
Secondary Effluent ◽  
Low Carbon ◽  
Cathodic Potential ◽  
Nitrate N ◽  
N Removal ◽  
Electrochemical Redox

Abstract In northern coastal industrial park, inlet of the wastewater treatment plant (WWTP) had the characteristics of low carbon source and high chloride ion concentration, which resulted in its poor biodegradability. In this case, the experiment explored an electrochemistral method to remove nitrogen. Cathodic potential, Ti/IrO2 was confirmed as the anode and − 1.6V was taken as the potential in order to remove nitrate-N. The findings include: when the initial chloride ion was 2000 and 3000 mg/L, the effect on the removal difference of nitrogen was slight. When the electrolysis time was 60 min, ammonia-N was removed completely, nitrite-N concentration kept 1mg/L approximately. The ammonia-N removal efficiency went up with the increasing cathodic potential, and was completely removed in different water samples, but nitrate-N removal showed an opposite result. The production amount of nitrite-N was the least at -1.6V. As the pH increased, ammonia-N and nitrate-N’s removal efficiency went up first and then down, the removal effect was the best at pH being 9, Nitrite-N was less influenced by pH. After optimizing the raw water sample, Nitrate-N and TN removal efficiency were significantly increased, but the nitrite-N almost kept constant.

Performance Evaluation of Palm Waste Screw Press Briquette Moulding Machine

2009 ◽  
Vol 62-64 ◽  
pp. 723-727
Author(s):  
C.O. Ilechie ◽  
G.F. Aibangbee ◽  
S.R. Ogblechi ◽  
P.E. Amiolemhen
Keyword(s):  
Performance Evaluation ◽  
Low Cost ◽  
Low Carbon Steel ◽  
Medium Size ◽  
Screw Thread ◽  
Low Carbon ◽  
Alternative Source ◽  
Palm Fruit ◽  
Moulding Machine ◽  
Palm Waste

An alternative source of heat energy to firewood called, palm waste briquette, has been developed from oil palm fruit process wastes. These wastes (sludge, shell, fibre) are compounded in a volumetric ratio of 1:2:3 and moulded into briquettes. The performance evaluation of a low cost women friendly palm waste briquette moulding machine was carried out. The evaluation showed that the machine designed and fabricated using readily available low carbon steel (mild steel) and employing the vertical screw thread mechanism in its operation, produces three different sizes of briquette (industrial sizes, medium sizes and domestic sizes). It requires only two unskilled operators and has a daily throughput of about 1,300kg briquettes (i.e. 400 pieces-industrial size or 800 pieces-medium size or 1,600 pieces-domestic size) unlike a modified brick moulding machine which has a daily throughput of 120 pieces industrial size

scholarly journals Evaluation of a novel low-carbon to nitrogen- and temperature-tolerant simultaneously nitrifying–denitrifying bacterium and its use in the treatment of river water

RSC Advances ◽  
2018 ◽  
Vol 8 (48) ◽  
pp. 27417-27422 ◽  
Author(s):  
Peng Jin ◽  
Yinyan Chen ◽  
Zhanwang Zheng ◽  
Qizhen Du
Keyword(s):  
Low Temperature ◽  
River Water ◽  
Removal Efficiency ◽  
Nitrogen Removal ◽  
Simultaneous Nitrification And Denitrification ◽  
Low Carbon ◽  
High Nitrogen ◽  
Denitrifying Bacterium ◽  
Nitrification And Denitrification

A novel simultaneous nitrification and denitrification Klebsiella sp. exhibits high nitrogen removal efficiency under low-temperature and low C/N wastewater.

Sign in / Sign up

Export Citation Format

Share Document