scholarly journals Performance of Anammox Processes for Wastewater Treatment: A Critical Review on Effects of Operational Conditions and Environmental Stresses

Water ◽  
2019 ◽  
Vol 12 (1) ◽  
pp. 20 ◽  
Author(s):  
Sunja Cho ◽  
Cicilia Kambey ◽  
Van Nguyen
Keyword(s):  
Wastewater Treatment ◽  
Nitrogen Removal ◽  
Bacterial Species ◽  
Organic Matter Content ◽  
Toxic Metal ◽  
Nitrogen Loading ◽  
Ammonium Oxidation ◽  
Metal Elements ◽  
Anammox Activity ◽  
Operational Factors

The anaerobic ammonium oxidation (anammox) process is well-known as a low-energy consuming and eco-friendly technology for treating nitrogen-rich wastewater. Although the anammox reaction was widely investigated in terms of its application in many wastewater treatment processes, practical anammox application at the pilot and industrial scales is limited because nitrogen removal efficiency and anammox activity are dependent on many operational factors such as temperature, pH, dissolved oxygen concentration, nitrogen loading, and organic matter content. In practical application, anammox bacteria are possibly vulnerable to non-essential compounds such as sulfides, toxic metal elements, alcohols, phenols, and antibiotics that are potential inhibitors owing to the complexity of the wastewater stream. This review systematically summarizes up-to-date studies on the effect of various operational factors on nitrogen removal performance along with reactor type, mode of operation (batch or continuous), and cultured anammox bacterial species. The effect of potential anammox inhibition factors such as high nitrite concentration, high salinity, sulfides, toxic metal elements, and toxic organic compounds is listed with a thorough interpretation of the synergistic and antagonistic toxicity of these inhibitors. Finally, the strategy for optimization of anammox processes for wastewater treatment is suggested, and the importance of future studies on anammox applications is indicated.

Enrichment of Anammox Bacteria by a Sequencing Fed Biofilm Batch Reactor (SFBFBR)

2014 ◽  
Vol 955-959 ◽  
pp. 663-666
Author(s):  
De Xiang Liao ◽  
Peng Hao Su ◽  
Kai Liang Yang ◽  
Dao Lun Feng ◽  
Hua Huai Lin
Keyword(s):  
Nitrogen Removal ◽  
Batch Reactor ◽  
Nitrogen Loading ◽  
Anammox Bacteria ◽  
Ammonium Oxidation ◽  
Nitrite Concentration ◽  
Loading Rates ◽  
Anammox Activity ◽  
Operation Period

A sequencing fed biofilm batch reactor (SFBFBR) seeded with returning activated sludge of a WWTP was started up to enrich Anammox (Anaerobic Ammonium Oxidation) bacteria and to investigate the nitrogen removal characterization of the Anammox biofilm system. Initially, the operation period was controlled at 3 days and the mineral medium (30 mg/l ammonium, 30 mg/l nitrite, about 2 L) was supplied continuously to SFBFBR in the first 68 hours. After 44 days’ cultivation, ammonium and nitrite concentration were decreased simultaneously without COD and DO, which means the anammox activity presented in the reactor. From t=55 days, in order to further enrich anammox bacteria, the substrate load began to increase by reducing the operation period from 3 days to 1 day and increasing the ammonium and nitrite concentrations. At the end of the experiment, the reactor was able to treat nitrogen loading rates up to 200±10 mg N/(L.d). The ammonium and nitrite reacted in the stoichiometrical of 1:1.135.

scholarly journals Anammox biofilm process using sugarcane bagasse as an organic carrier

2021 ◽  
Vol 26 (1) ◽  
pp. 25
Author(s):  
Zulkarnaini Zulkarnaini ◽  
Puti Sri Komala ◽  
Arief Almi
Keyword(s):  
Sugarcane Bagasse ◽  
Nitrogen Removal ◽  
Removal Rate ◽  
Nitrogen Loading ◽  
Uasb Reactor ◽  
Anaerobic Sludge ◽  
Ammonium Oxidation ◽  
Biofilm Process ◽  
Anaerobic Sludge Blanket ◽  
Anammox Process

The anaerobic ammonium oxidation (anammox) biofilm process commonly uses various inorganic carriers to enhance nitrogen removal under anaerobic conditions. This study aims to analyze the performance of nitrogen removal in anammox process using sugarcane bagasse as an organic carrier. The experiment was carried out by using an up‐flow anaerobic sludge blanket (UASB) reactor for treating artificial wastewater at room temperature. The reactor was fed with ammonium and nitrite with the concentrations of 70‐150 mg–N/L and variations in the hydraulic retention time of 24 and 12 h. The granular anammox belongs to the genus Candidatus Brocadia sinica that was added as an inoculum of the reactor operation. The experimental stoichiometric of anammox for ΔNO2‐–N: ΔNH4+–N and ΔNO3‐: ΔNH4+ were 1.24 and 0.18, respectively, which is similar to anammox stoichiometry. The maximum Nitrogen Removal Rate (NRR) has achieved 0.29 kg–N/m3.d at Nitrogen Loading Rate (NLR) 0.6 kg–N/m3.d. The highest ammonium conversion efficiency (ACE) and nitrogen removal efficiency (NRE) were 88% and 85%, respectively. Based on this results, it indicated that sugarcane bagasse as organic carriers could increase the amount of total nitrogen removal by provided of denitrification process but inhibited the anammox process at a certain COD concentration.

Performance and inhibition recovery of anammox reactors seeded with different types of sludge

2011 ◽  
Vol 63 (4) ◽  
pp. 710-718 ◽  
Author(s):  
S. Q. Ni ◽  
J. Meng
Keyword(s):  
Nitrogen Removal ◽  
Granular Sludge ◽  
Recovery Process ◽  
Nitrogen Loading ◽  
Anaerobic Sludge ◽  
Anammox Bacteria ◽  
Recovery Processes ◽  
Anammox Activity ◽  
Different Types ◽  
Anaerobic Sludge Blanket

In order to study the performance, inhibition and recovery processes of different types of anammox sludge, three up-flow anaerobic sludge blanket reactors were inoculated with flocculent sludge, granular sludge, and cultured inactive methanogenic granules. During stable period, with nitrogen loading rates of 0.9–1.1 kg/m3/d, the total nitrogen removal efficiencies of these reactors averaged at 86.5%, 90.8% and 93.5%, respectively. The kinetics study indicated that the reactor seeded with cultured inactive methanogenic granules possessed the highest nitrogen removal potential, followed by the granular anammox reactor and the flocculent anammox reactor. The study suggested that a concentration as high as 988.3 mg NH4+-N/L and 484.4 mg NO2−-N/L could totally inhibit granular anammox bacteria and result in a inhibition of 50% flocculent anammox activity. In addition, reactors seeded with flocculent sludge and anammox granules could be fully recovered by decreasing their influent substrate concentrations. However, the decrease of influent substrate concentration for the reactor with cultured inactive methanogenic granules could only restore about 75% of its bacterial activity. In this study, anammox bacteria purity was the major factor to evaluate the recovery ability in comparison with sludge type. Free ammonia was a more appropriate indicator for the anammox recovery process compared to free nitric acid.

scholarly journals Performance of the anammox sequencing batch reactor treating synthetic and real landfill leachate

2018 ◽  
Vol 44 ◽  
pp. 00179 ◽  
Author(s):  
Mariusz Tomaszewski ◽  
Grzegorz Cema ◽  
Tomasz Twardowski ◽  
Aleksandra Ziembińska-Buczyńska
Keyword(s):  
Nitrogen Removal ◽  
Landfill Leachate ◽  
Sequencing Batch Reactor ◽  
Batch Reactor ◽  
Nitrogen Loading ◽  
Synthetic Wastewater ◽  
High Nitrogen ◽  
Removal Capacity ◽  
Anammox Activity ◽  
Anammox Process

The anaerobic ammonium oxidation (anammox) process is one of the most energy efficient and environmentally-friendly bioprocess for the treatment of the wastewater with high nitrogen concentration. The aim of this work was to study the influence of the high nitrogen loading rate (NLR) on the nitrogen removal in the laboratory-scale anammox sequencing batch reactor (SBR), during the shift from the synthetic wastewater to landfill leachate. In both cases with the increase of NLR from 0.5 to 1.1 – 1.2 kg N/m3d, the nitrogen removal rate (NRR) increases to about 1 kg N/m3d, but higher NLR caused substrates accumulation and affects anammox process efficiency. Maximum specific anammox activity was determined as 0.638 g N/g VSSd (NRR 1.023 kg N/m3d) and 0.594 g N/g VSSd (NRR 1.241 kg N/m3d) during synthetic and real wastewater treatment, respectively. Both values are similar and this is probably the nitrogen removal capacity of the used anammox biomass. This indicates, that landfill leachate did not influence the nitrogen removal capacity of the anammox process.

scholarly journals A sample study on nitrogen removal from polluted streams by using hybrid natural wastewater treatment systems

2018 ◽  
Vol 20 (3) ◽  
pp. 572-581 ◽  
Keyword(s):  
Wastewater Treatment ◽  
Nitrogen Removal ◽  
Overland Flow ◽  
Low Cost ◽  
Free Water ◽  
Filter Material ◽  
Nitrogen Loading ◽  
Water Reservoirs ◽  
Hydraulic Residence Time ◽  
High Nitrogen Loading

<p>The ecological structure and function of the water reservoirs deteriorate dramatically because of streams fed by the excess nitrogen-containing wastewater. To protect the water reservoirs from polluted streams, structures such as natural wastewater treatment (NWT) systems to be created inside or outside streams may be a most suitable and economical solution method to overcoming the problem. In this study, a hybrid NWT system was installed to remove nitrogenous pollutants in Karasu creek (Nigde city, Turkey) in 2014. The system built near the creek consisted of feeding basin (FB), settlement basin (SB), free water surface-constructed wetland (FWS-CW), and overland flow (OF) system respectively. Despite quite high nitrogen loading rates, the system managed to reduce NH4+-N from average 29 mg/L to 12 mg/L and TN from 44 mg/L to 19 mg/L with an average removal efficiency of 57 %. Results revealed that hydraulic and nitrogen loading rate, temperature and seasonal variation, BOD/TKN ratio, hydraulic residence time (HRT), and the use of the filter material were effective on nitrogen removal. The results suggest that the hybrid NWT systems can be used as a low-cost wastewater treatment alternative to improve water quality in streams contaminated by nitrogenous pollutants in the similar areas.</p>

scholarly journals Autotrophic ammonia removal from landfill leachate using anaerobic membrane bioreactor

2017 ◽  
Author(s):  
S. Suneethi ◽  
Kurian Joseph
Keyword(s):  
Nitrogen Removal ◽  
Landfill Leachate ◽  
Membrane Bioreactor ◽  
Loading Rate ◽  
Ammonia Removal ◽  
Nitrogen Loading ◽  
Ammonium Oxidation ◽  
Anaerobic Membrane Bioreactor ◽  
N Removal ◽  
Anammox Process

Anaerobic Membrane Bioreactor (AnMBR) is an innovative high cell density system having complete biomass retention, high reactor loading and low sludge production and suitable for developing slow growing autotrophic bacterial cultures such as ANAMMOX. The Anaerobic Ammonium Oxidation (ANAMMOX) process is an advanced biological nitrogen removal removes ammonia using nitrite as the electron acceptor without oxygen. The NH4+-N in the landfill leachate that is formed due to the release of nitrogen from municipal solid waste (MSW), when discharged untreated, into the surface water can result in eutrophication, aquatic toxicity and emissions of nitrous oxide (N2O) to atmosphere. Besides, NH4+-N accumulation in landfills poses long term pollution issue with significant interference during post closure thereby requiring its removal prior to ultimate disposal into inland surface waters. The main objective of this study was to investigate the feasibility and treatment efficiency of treating landfill leachate (to check) for removing NH4+-N by adopting ANAMMOX process in AnMBR. The AnMBR was optimized for Nitrogen Loading Rate (NLR) varying from 0.025 to 5 kg NH4+-N/ m3/ d with hydraulic retention time (HRT) ranging from 1 to 3 d. NH4+-N removal efficacy of 85.13 ± 9.67% with the mean nitrogen removal rate (NRR) of 5.54 ± 0.63 kg NH4+-N/ m3/ d was achieved with nitrogen loading rate (NLR) of 6.51 ± 0.20 kg NH4+- N/ m3/ d at 1.5 d HRT. The nitrogen transformation intermediates in the form of hydrazine (N2H4) and hydroxylamine (NH2OH) were 0.008 ± 0.005 mg/L and 0.006 ± 0.001 mg/L, respectively, indicating co-existence of aerobic ammonia oxidizers (AOB) and ANAMMOX. The free ammonia (NH3) and free nitrous acid (HNO2) concentrations were 26.61 ± 16.54 mg/L and (1.66 ± 0.95) x 10-5 mg/L, preventing NO2--N oxidation to NO3--N enabling sustained NH4+- N removal.

scholarly journals Nitrification mainly driven by ammonia-oxidizing bacteria and nitrite-oxidizing bacteria in an anammox-inoculated wastewater treatment system

AMB Express ◽  
2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Jing Lu ◽  
Yiguo Hong ◽  
Ying Wei ◽  
Ji-Dong Gu ◽  
Jiapeng Wu ◽  
...  
Keyword(s):  
Wastewater Treatment ◽  
Activated Sludge ◽  
Nitrogen Removal ◽  
High Throughput Sequencing ◽  
High Efficiency ◽  
Ammonia Oxidation ◽  
Ammonia Oxidizing Bacteria ◽  
Ammonium Oxidation ◽  
Strong Activity ◽  
Nitrite Oxidizing Bacteria

AbstractAnaerobic ammonium oxidation (anammox) process has been acknowledged as an environmentally friendly and time-saving technique capable of achieving efficient nitrogen removal. However, the community of nitrification process in anammox-inoculated wastewater treatment plants (WWTPs) has not been elucidated. In this study, ammonia oxidation (AO) and nitrite oxidation (NO) rates were analyzed with the incubation of activated sludge from Xinfeng WWTPs (Taiwan, China), and the community composition of nitrification communities were investigated by high-throughput sequencing. Results showed that both AO and NO had strong activity in the activated sludge. The average rates of AO and NO in sample A were 6.51 µmol L−1 h−1 and 6.52 µmol L−1 h−1, respectively, while the rates in sample B were 14.48 µmol L−1 h−1 and 14.59 µmol L−1 h−1, respectively. The abundance of the nitrite-oxidizing bacteria (NOB) Nitrospira was 0.89–4.95 × 1011 copies/g in both samples A and B, the abundance of ammonia-oxidizing bacteria (AOB) was 1.01–9.74 × 109 copies/g. In contrast, the abundance of ammonia-oxidizing archaea (AOA) was much lower than AOB, only with 1.28–1.53 × 105 copies/g in samples A and B. The AOA community was dominated by Nitrosotenuis, Nitrosocosmicus, and Nitrososphaera, while the AOB community mainly consisted of Nitrosomonas and Nitrosococcus. The dominant species of Nitrospira were Candidatus Nitrospira defluvii, Candidatus Nitrospira Ecomare2 and Nitrospira inopinata. In summary, the strong nitrification activity was mainly catalyzed by AOB and Nitrospira, maintaining high efficiency in nitrogen removal in the anammox-inoculated WWTPs by providing the substrates required for denitrification and anammox processes.

Microbiological conversions in nitrogen removal

1998 ◽  
Vol 38 (1) ◽  
pp. 1-7 ◽  
Author(s):  
M. C. M. Van Loosdrecht ◽  
M. S. M. Jetten
Keyword(s):  
Wastewater Treatment ◽  
Nitrogen Removal ◽  
Organic Substrate ◽  
Heterotrophic Nitrification ◽  
Aerobic Denitrification ◽  
Ammonium Oxidation ◽  
Treatment Processes ◽  
Nitrogen Conversion ◽  
The Many ◽  
Wastewater Treatment Systems

Nitrogen conversion processes are essential for most wastewater treatment systems. Due to the many possible conversions, and the complexity of analysing the reactions under actual conditions, there is much room for confusion. This review provides an overview of the possible microbiological nitrogen conversions described in literature. The relevance of these conversions with respect to wastewater treatment processes is discussed. Rates described for aerobic denitrification or denitrification by autotrophic nitrifiers are so low that these conversions probably do not play a significant role under practical conditions. Heterotrophic nitrification may be of relevance only when the wastewater contains a high COD/N ratio (&gt;10). Anaerobic ammonium oxidation can occur in fully autotrophic systems with very long sludge retention times or biofilm systems. This conversion offers great opportunities since it allows us to denitrify with ammonium as electron donor, i.e. no organic substrate is needed in the nitrogen removal process.

Sustainable nitrogen removal by denitrifying anammox applied for anaerobic pre-treated potato wastewater

2012 ◽  
Vol 66 (12) ◽  
pp. 2630-2637 ◽  
Author(s):  
A. Mulder ◽  
A. I. Versprille ◽  
D. van Braak
Keyword(s):  
Nitrogen Removal ◽  
Oxygen Demand ◽  
Nitrogen Loading ◽  
Biofilm Reactor ◽  
Ammonium Oxidation ◽  
Loading Rates ◽  
Removal Capacity ◽  
Nitrite Production ◽  
Conversion Rates ◽  
In Series

The feasibility of sustainable nitrogen removal was investigated in a two stage biofilm configuration consisting of a MBBR (Moving Bed Biofilm Reactor) and a Deamox reactor (Biobed-EGSB). The MBBR is used for nitrification and the denitrifying ammonium oxidation (Deamox) is aimed at a nitrogen removal process in which part of the required nitrite for the typical anammox reaction originated from nitrate. Anaerobic pre-treated potato wastewater was supplied to a MBBR and Deamox reactor operated in series with a bypass flow of 30%. The MBBR showed stable nitrite production at ammonium-loading rates of 0.9–1.0 kg NH4-N/m3 d with ammonium conversion rates of 0.80–0.85 kg NH4-N/m3 d. The nitrogen-loading rate and conversion rate of the Deamox reactor were 1.6–1.8 and 1.6 kg N/m3 d. The maximum ammonium removal capacity in the Deamox reactor was 0.6 kg NH4-N/m3 d. The removal efficiency of soluble total nitrogen reached 90%. The Deamox process performance was found to be negatively affected during decline of the operating temperature from 33 to 22 °C and by organic loading rates with a chemical oxygen demand (COD)/NO2-N ratio &gt;1.

scholarly journals NITROGEN REMOVAL IN THE ANAMMOX BIOFILM REACTOR USING PALM FIBER AS CARRIER IN TROPICAL TEMPERATURE OPERATION

2019 ◽  
Vol 10 (2) ◽  
pp. 7-15
Author(s):  
Zulkarnaini Zulkarnaini ◽  
Ansiha Nur ◽  
Wina Ermaliza
Keyword(s):  
Removal Efficiency ◽  
Nitrogen Removal ◽  
Nitrogen Loading ◽  
Biofilm Reactor ◽  
Laboratory Scale ◽  
Uasb Reactor ◽  
Anaerobic Sludge ◽  
Ammonium Oxidation ◽  
Palm Fiber ◽  
Anammox Process

Anaerobic ammonium oxidation (anammox) is the process of converting ammonium directly into nitrogen gas with nitrite as an electron acceptor under anaerobic conditions. This process is more effective than conventional nitrification-denitrification but is very dependent on several parameters, one of which is temperature. The optimum temperature range for the growth of anammox bacteria is 30-400C. The purpose of this research was to determine the efficiency of nitrogen removal by anammox process using palm fibers in the Up-Flow Anaerobic Sludge Blanket (UASB) reactor in the tropical temperature. The experiment was conducted at a laboratory scale with a variation of Hydraulic Retention Time (HRT) 24 h and 12 h using artificial wastewater. The reactor was inoculated with anammox granule genus Candidatus Brocadia. The concentration of ammonium, nitrite, and nitrate in the influent and effluent were measured using a UV-Vis spectrophotometer based on standard method. Based on the experiment, the ratio ΔNH4+-N:ΔNO2--N and ΔNO3--N:ΔNH4+-N similar with stoichiometric of anammox. The maximum Nitrogen removal performance (NRT) achieved 0.11 kg-N/m3.d at Nitrogen Loading Rate (NLR) 0.14 kg-N/m3.d and 0.20 kg-N/m3.d at NLR 0.29 kg-N/m3.d. The removal efficiency for Ammonium Conversion Efficiency (ACE) and Nitrogen Removal Efficiency (NRE) in HRT 24 h were 79% and 76%, respectively while decreased in HRT 12 h were 72% and 69%, respectively. Anammox process can be applied in the tropical temperature at a laboratory scale using a UASB reactor with palm fiber as the carrier.

Sign in / Sign up

Export Citation Format

Share Document