scholarly journals Migration of Pharmaceuticals from the Warta River to the Aquifer at a Riverbank Filtration Site in Krajkowo (Poland)

Water ◽  
2019 ◽  
Vol 11 (11) ◽  
pp. 2238 ◽  
Author(s):  
Roksana Kruć ◽  
Krzysztof Dragon ◽  
Józef Górski
Keyword(s):  
Surface Water ◽  
Preliminary Investigation ◽  
Riverbank Filtration ◽  
Source Water ◽  
Analgesic Drugs ◽  
X Ray ◽  
Sampling Points ◽  
Extended Analysis ◽  
Significant Attenuation ◽  
Made In

Studies on the presence of pharmaceuticals in water were carried out on the riverbank filtration site, Krajkowo–Poznań (Poland). A preliminary investigation conducted in 3 sampling points showed the presence of pharmaceuticals in both surface water and bank filtrate. Based on the above, an extended analysis was made in July, August and October 2018 and included surface water and wells located at a different distance (5–250 m) and travel time (1–150 days) from source water (Warta River). Firstly, 75 compounds (antibiotics, anti-inflammatory and analgesic drugs, psychotropic drugs, x-ray agents and β-blockers) were tested and 25 of them were detected in the river or bank filtrate. The highest concentrations were observed in source water and then were reduced along the flow path. The sampling points located close to the river (<38 m) are characterized by low removal. Higher removal is visible in wells located 64–82 m away from the river, while 250 m from the river most compounds are completely attenuated. Carbamazepine, gabapentin, tramadol, oxypurinol, fluconazole, and lamotrigine are the most common compounds. Some of the tested parameters occur only in the river water, e.g., iopromide, diclofenac, iohexol, clindamycin, fexofenadine and valsartan. The research shows that at the site, a significant attenuation of pharmaceuticals can be achieved at travel times of 40–50 days and distances of 60–80 m, although higher values are ensured when the well is located more than 250 m away.

Microanalysis of precipitates in a ferritic steel

1978 ◽  
Vol 36 (1) ◽  
pp. 618-619
Author(s):  
J.M. Titchmarsh
Keyword(s):  
Ferritic Steel ◽  
Particle Identification ◽  
Energy Dispersive ◽  
Objective Lens ◽  
Ferritic Steels ◽  
Replica Technique ◽  
X Ray ◽  
Large Numbers ◽  
Scanning Transmission ◽  
Made In

The advances in recent years in the microanalytical capabilities of conventional TEM's fitted with probe forming lenses allow much more detailed investigations to be made of the microstructures of complex alloys, such as ferritic steels, than have been possible previously. In particular, the identification of individual precipitate particles with dimensions of a few tens of nanometers in alloys containing high densities of several chemically and crystallographically different precipitate types is feasible. The aim of the investigation described in this paper was to establish a method which allowed individual particle identification to be made in a few seconds so that large numbers of particles could be examined in a few hours.A Philips EM400 microscope, fitted with the scanning transmission (STEM) objective lens pole-pieces and an EDAX energy dispersive X-ray analyser, was used at 120 kV with a thermal W hairpin filament. The precipitates examined were extracted using a standard C replica technique from specimens of a 2¼Cr-lMo ferritic steel in a quenched and tempered condition.

Searching for the causes why some of the paintings by Mihaly Munkacsy are darkening

1990 ◽  
Vol 48 (2) ◽  
pp. 204-205
Author(s):  
Imre Pozsgai ◽  
Klara Erdöhalmi-Torok
Keyword(s):  
Electron Beam ◽  
Cross Section ◽  
Polyester Resin ◽  
National Gallery ◽  
X Ray ◽  
Art Historians ◽  
Made In ◽  
Grinding And Polishing

The paintings by the great Hungarian master Mihaly Munkacsy (1844-1900) made in an 8-9 years period of his activity are deteriorating. The most conspicuous sign of the deterioration is an intensive darkening. We have made an attempt by electron beam microanalysis to clarify the causes of the darkening. The importance of a study like this is increased by the fact that a similar darkening can be observed on the paintings by Munkacsy’s contemporaries e.g Courbet and Makart. A thick brown mass the so called bitumen used by Munkacsy for grounding and also as a paint is believed by the art historians to cause the darkening.For this study, paint specimens were taken from the following paintings: “Studio”, “Farewell” and the “Portrait of the Master’s Wife”, all of them are the property of the Hungarian National Gallery. The paint samples were embedded in a polyester resin “Poly-Pol PS-230” and after grinding and polishing their cross section was used for x-ray mapping.

X-ray mapping without STEM

1994 ◽  
Vol 52 ◽  
pp. 508-509
Author(s):  
Judith M. Brock ◽  
Max T. Otten
Keyword(s):  
Life Science ◽  
Materials Science ◽  
Chemical Elements ◽  
Full Description ◽  
Scanning System ◽  
Elemental Distribution ◽  
X Ray ◽  
Transmission Electron ◽  
Distribution Of Elements ◽  
Made In

A knowledge of the distribution of chemical elements in a specimen is often highly useful. In materials science specimens features such as grain boundaries and precipitates generally force a certain order on mental distribution, so that a single profile away from the boundary or precipitate gives a full description of all relevant data. No such simplicity can be assumed in life science specimens, where elements can occur various combinations and in different concentrations in tissue. In the latter case a two-dimensional elemental-distribution image is required to describe the material adequately. X-ray mapping provides such of the distribution of elements.The big disadvantage of x-ray mapping hitherto has been one requirement: the transmission electron microscope must have the scanning function. In cases where the STEM functionality – to record scanning images using a variety of STEM detectors – is not used, but only x-ray mapping is intended, a significant investment must still be made in the scanning system: electronics that drive the beam, detectors for generating the scanning images, and monitors for displaying and recording the images.

scholarly journals Principles of Different X-ray Phase-Contrast Imaging: A Review

2021 ◽  
Vol 11 (7) ◽  
pp. 2971
Author(s):  
Siwei Tao ◽  
Congxiao He ◽  
Xiang Hao ◽  
Cuifang Kuang ◽  
Xu Liu
Keyword(s):  
Biological Samples ◽  
Phase Contrast ◽  
Recent Progress ◽  
Phase Contrast Imaging ◽  
Contrast Imaging ◽  
X Ray ◽  
X Ray Imaging ◽  
Internal Structures ◽  
X Ray Absorption ◽  
Made In

Numerous advances have been made in X-ray technology in recent years. X-ray imaging plays an important role in the nondestructive exploration of the internal structures of objects. However, the contrast of X-ray absorption images remains low, especially for materials with low atomic numbers, such as biological samples. X-ray phase-contrast images have an intrinsically higher contrast than absorption images. In this review, the principles, milestones, and recent progress of X-ray phase-contrast imaging methods are demonstrated. In addition, prospective applications are presented.

scholarly journals Non-destructive handheld XRF study of archaeological composite silver objects—the case study of the late Roman Seuso Treasure

2021 ◽  
Vol 13 (5) ◽  
Author(s):  
Viktória Mozgai ◽  
Bernadett Bajnóczi ◽  
Zoltán May ◽  
Zsolt Mráv
Keyword(s):  
Fluorescence Analysis ◽  
The Body ◽  
High Quality ◽  
X Ray ◽  
Composite Objects ◽  
Mechanical Attachment ◽  
Non Destructive ◽  
Made In ◽  
Late Roman

AbstractThis study details the non-destructive chemical analysis of composite silver objects (ewers, situlas, amphora and casket) from one of the most significant late Roman finds, the Seuso Treasure. The Seuso Treasure consists of fourteen large silver vessels that were made in the fourth–early fifth centuries AD and used for dining during festive banquets and for washing and beautification. The measurements were systematically performed along a pre-designed grid at several points using handheld X-ray fluorescence analysis. The results demonstrate that all the objects were made from high-quality silver (above 90 wt% Ag), with the exception of the base of the Geometric Ewer B. Copper was added intentionally to improve the mechanical properties of soft silver. The gold and lead content of the objects shows constant values (less than 1 wt% Au and Pb). The chemical composition as well as the Bi/Pb ratio suggests that the parts of the composite objects were manufactured from different silver ingots. The ewers were constructed in two ways: (i) the base and the body were made separately, or (ii) the ewer was raised from a single silver sheet. The composite objects were assembled using three methods: (i) mechanical attachment; (ii) low-temperature, lead-tin soft solders; or (iii) high-temperature, copper-silver hard solders. Additionally, two types of gilding were revealed by the XRF analysis, one with remnants of mercury, i.e. fire-gilding, and another type without remnants of mercury, presumably diffusion bonding.

Partial volume characteristics of ionization chambers in kilovoltage x-ray exposure measurements

2011 ◽  
Vol 11 (3) ◽  
pp. 184-188
Author(s):  
Syed F. Akber ◽  
Than S. Kehwar
Keyword(s):  
Ionization Chamber ◽  
Incident Radiation ◽  
Ionization Chambers ◽  
X Ray ◽  
Partial Volume ◽  
Spatial Response ◽  
Beam Output ◽  
Volume Characteristics ◽  
Made In ◽  
Lead Sheet

AbstractThe partial volume (spatial) response of four ionization chambers (Keithley) in kilovoltage X-ray beams, generated by the Philips Super 80CP X-ray unit, was assessed. The volume of the ionization chambers were of 10 cm3, 15 cm3, 150 cm3, and 600 cm3 used with Keithley electrometer Model 35040. The beam output was measured using a monitor chamber (Radcal 6.0 cm3) placed close to the collimator. The source to chamber distance was kept constant at 1 m. For the measurement of the response of ionization chambers of 15 cm3, 150 cm3, and 600 cm3, a slit of 2.0 mm width was made in a lead sheet of 3.2 mm thick and size of 30 × 30 cm2 and was placed on the ionization chamber. The measurements were made for 81 kVp, 400 mA, and 0.25 s and the slit was moved at an increment of 2.0 mm over the entire length of the chamber. For the measurements of the ionization chamber of 10 cm3 (CT chamber), the beams of 120 kVp, 200 mA and 0.2 s were generated, and a slit of 5 mm width was made in a similar lead sheet that was moved at an increment of 5.0 mm. From the result it appears that the sensitive volumes of the ionization chambers affect the response of the ionization chamber to incident radiation.

scholarly journals Extraction of γ-Alumina from Low-Cost Kaolin

Resources ◽  
2018 ◽  
Vol 7 (4) ◽  
pp. 63
Author(s):  
Khalil Ibrahim ◽  
Mohammad Moumani ◽  
Salsabeela Mohammad
Keyword(s):  
Low Cost ◽  
Morphological Properties ◽  
X Ray Diffraction ◽  
X Ray ◽  
Aluminum Metal ◽  
Alumina Particles ◽  
Two Stages ◽  
Method Of Extraction ◽  
Microcrystalline Powder ◽  
Made In

A combined process is proposed for the utilization of local kaolin to produce alumina particles. The applied process is made in two stages: calcination at 700 °C with sodium chloride and leaching with sulfuric followed by hydrochloric acids. The optimal extraction efficiency can be obtained when the conditions are as follows: leaching temperature is at 140 °C, leaching time is 3 h 45 min and concentration of sulfuric acid is 40 wt.%. The results show that the purity of alumina reaches 79.28%, which is suitable for the production of aluminum metal. It is evident that this method of extraction of alumina from the kaolin ash is practical and feasible. The structural and morphological properties of the calcined microcrystalline powder was characterized by X-ray diffraction and scanning electron microscope (SEM).

Sign in / Sign up

Export Citation Format

Share Document