scholarly journals Towards a Sustainable Water Supply: Humic Acid Removal Employing Coagulation and Tangential Cross Flow Microfiltration

Water ◽  
2019 ◽  
Vol 11 (10) ◽  
pp. 2093 ◽  
Author(s):  
Mohammed Wali Hakami ◽  
Abdullah Alkhudhiri ◽  
Myrto-Panagiota Zacharof ◽  
Nidal Hilal

Synthetic solutions assimilating irrigated groundwater containing varying concentrations of humic acid (10 mg/L), saline (10–35 g/L) and metal agents (5–10 mg/L), were processed through a ceramic microfiltration membrane (Sterilox Ltd., 0.5 μm). This was done with enrichment schemes using polymeric coagulants (PDADMAC) applied to enhance the removal of the above-mentioned pollutants. The study was conducted with the scope of investigating the feasibility of sequential and hybrid coagulation and microfiltration as a method of choice for drinking water treatment. Membrane microfiltration is easily scalable into various arrangements, allowing versatility in operation and enrichment schemes, with a relatively lower cost which other treatment practices do not allow. The highest humic acid removal, 91.11% was achieved with hybrid coagulation.

2016 ◽  
Vol 16 (4) ◽  
pp. 922-930 ◽  
Author(s):  
L. Richard ◽  
E. Mayr ◽  
M. Zunabovic ◽  
R. Allabashi ◽  
R. Perfler

The implementation and evaluation of biological nitrification as a possible treatment option for the small-scale drinking water supply of a rural Upper Austrian community was investigated. The drinking water supply of this community (average system input volume: 20 m3/d) is based on the use of deep anaerobic groundwater with a high ammonium content of geogenic origin (up to 5 mg/l) which must be treated to prevent the formation of nitrites in the drinking water supply system. This paper describes the implementation and operation of biological nitrification despite several constraints including space availability, location and financial and manpower resources. A pilot drinking water treatment plant, including biological nitrification implemented in sand filters, was designed and constructed for a maximum treatment capacity of 1.2 m3/h. Online monitoring of selected physicochemical parameters has provided continuous treatment performance data. Treatment performance of the plant was evaluated under standard operation as well as in the case of selected malfunction events.


2000 ◽  
Vol 46 (6) ◽  
pp. 565-576 ◽  
Author(s):  
Pierre Payment ◽  
Aminata Berte ◽  
Michèle Prévost ◽  
Bruno Ménard ◽  
Benoît Barbeau

A 300-km portion of the Saint Lawrence hydrological basin in the province of Québec (Canada) and 45 water treatment plants were studied. River water used by drinking water treatment plants was analyzed (6-L sample volumes) to determine the level of occurrence of bacterial indicators (total coliforms, fecal coliforms, and Clostridium perfringens) and pathogens (Giardia lamblia, Cryptosporidium, human enteric viruses). Pathogens and bacterial indicators were found at all sites at a wide range of values. Logistic regression analysis revealed significant correlations between the bacterial indicators and the pathogens. Physicochemical and treatment practices data were collected from most water treatment plants and used to estimate the level of removal of pathogens achieved under cold (0°C-4°C) and warm (20°C-25°C) water temperature conditions. The calculated removal values were then used to estimate the annual risk of Giardia infection using mathematical models and to compare the sites. The estimated range of probability of infection ranged from 0.75 to less than 0.0001 for the populations exposed. Given the numerous assumptions made, the model probably overestimated the annual risk, but it provided comparative data of the efficacy of the water treatment plants and thereby contributes to the protection of public health.Key words: public health, drinking water, health risk, pathogen occurrence.


1999 ◽  
Vol 48 (5) ◽  
pp. 177-185 ◽  
Author(s):  
O. Griffini ◽  
M. L. Bao ◽  
D. Burrini ◽  
D. Santianni ◽  
C. Barbieri ◽  
...  

2018 ◽  
Vol 2 (2) ◽  
pp. 39-48
Author(s):  
Hayder Mohammed Issa ◽  
Reem Ahmed Alrwai

Safe source of drinking water is always considered as an essential factor in water supply for cities and urban areas. As a part of this issue, drinking water quality is monitored via a useful scheme: developing drinking water quality index DWQI. DWQI is preferably used as it summarizes the whole physicochemical and bacteriological properties of a drinking water sample into a single and simple term. In this study, an evaluation was made for three drinking water treatment plants DWTPs named: Efraz 1, Efraz 2 and Efraz 3 that supply drinking water to Erbil City. The assessment was made by testing thirteen physicochemical and two bacteriological parameters during a long period of (2003 – 2017). It has been found that turbidity, electrical conductivity EC, total alkalinity, total hardness, total coliform and fecal coliform have more influence on drinking water quality. DWQI results showed that the quality of drinking water supplied by the three DWTPs in Erbil City fallen within good level. Except various occasional periods where the quality was varying from good to fair. The quality of the drinking water supply never reached the level of marginal or poor over the time investigated. The applied hierarchical clustering analysis HCA classifies the drinking water dataset into three major clusters, reflecting diverse sources of the physicochemical and bacteriological parameter: natural, agriculture and urban discharges.


2013 ◽  
Vol 4 (3) ◽  
pp. 11-16 ◽  
Author(s):  
W. Chali ◽  
I. Yakub

The demand and market growth of activated carbon (AC) in drinking water treatment have been increasing over the recent years. This is because of the better properties and relatively lower cost of AC compared to inorganic adsorbents like ceramics. However, there have been limited studies on the effects of AC preparation including type of cleansing agent on the adsorption of metal and the turbidity of treated tap water. Therefore, this research investigated the effect of types of cleansing agent and sorbent dosage on turbidity reduction and metal removal in drinking water treatment. The analysis showed that 200 g dosage of AC that has been cleansed with FeCl3 has the turbidity and metal removal improved the most. For aesthetic value of drinking water though, filtration by using AC cleansed with KOH gave better taste and increasing the sorbent dosage up to 300 g increased this performance.


2017 ◽  
Vol 23 (2) ◽  
pp. 328-337 ◽  
Author(s):  
Alessandra Imbrogno ◽  
Jennifer Biscarat ◽  
Andrea Iris Schafer

Background: Estrogens and their synthetic analogues are widely used as pharmaceuticals. Upon oral administration these drugs are eventually excreted via urine. The persistence of these pharmaceuticals and inefficient removal by water treatment lead to accumulation in surface water and effluents with negative effects for aquatic life and human health. Methods: In this study, the uptake of estradiol by a combined magnetic ion exchange resin - ultrafiltration process (MIEX-UF) was investigated. This is a relatively common process used in drinking water treatment for the removal of natural organic matter. However, uptake of micropollutants, such as steroidal pharmaceuticals, may occur as a side effect of water treatment due to the high affinity for polymeric materials. To elucidate the mechanism governing estradiol partitioning between water, resin and membrane, the influence of different parameters, such as pH, humic acid concentration and membrane molecular-weight-cut-off (MWCO) was studied. Results: Humic acid concentration and pH affected estradiol uptake most. At pH 11 the most significant increase of estradiol uptake was observed for MIEX-UF process (30 ng/g corresponding to 80%) compared with individual UF (17 ng/g corresponding to 12%). The presence of humic acid slightly reduced estradiol uptake at pH 11 (about 55%) due to competition for the ion exchange binding sites. Conclusion: Results demonstrated that the uptake of estradiol, which is amongst the most potent EDCs detected in surface water, in the MIEX-UF process can reach significant quantities (30 ng/g of resin) leading to uncontrolled accumulation of this micropollutant during drinking water treatment. This study gives a novel contribution in the understanding the mechanism of the unanticipated accumulation of pharmaceuticals, such as estradiol, in the drinking water treatment process.


Sign in / Sign up

Export Citation Format

Share Document