scholarly journals Analysis of Migration of Polycyclic Aromatic Hydrocarbons from Sewage Sludge Used for Fertilization to Soils, Surface Waters, and Plants

Water ◽  
2019 ◽  
Vol 11 (6) ◽  
pp. 1270 ◽  
Author(s):  
Ewa Stańczyk-Mazanek ◽  
Longina Stępniak ◽  
Urszula Kępa

In this paper, we discuss the effect sewage sludge (SS) application has on the contamination of polycyclic aromatic hydrocarbons in fertilized soils and groundwater. Morver, the contents of these compounds in plant biomass was analyzed. For six months, composted sewage sludge was introduced into sandy soil. The research was conducted under lysimetric experiment conditions with the possibility of collecting soil leachate in natural conditions. The following doses of sewage sludge were used: 0, 10, 20, 30, and 40 t/ha calculated per experimental object containing 10 kg of sandy soil. The examinations were carried out within a three-year time frame. Dactylis glomerata grass was grown on the fertilized soils. Every year, the content of polycyclic aromatic hydrocarbons (PAHs) was collected from fertilized objects and analyzed in soil leachate, which can contaminate surface water. The following six polycylic aromatic hydrocarbons defined by Polish standards were determined: benzo(b)fluoranthene, benzo(k)fluoranthene, benzo(a)pyrene, dibenz(a,h)anthracene, and benzo(g,h,i)perylene, indeno(1,2,3-cd)pyrene. Further, the content of PAHs in soils and the bioaccumulation of these compounds in cultivated plants were evaluated after each year. The results of the study showed that the increase in the dose of sewage sludge used for soil fertilization led to the rise in the amount of polycyclic aromatic hydrocarbons analyzed in the soil. The compounds migrated to cultivated plants. This phenomenon was observed especially in the first year following soil fertilization with sewage sludge. Excessive accumulation of PAHs (especially benzo(a)pyrene) was observed in plant biomass in the first year of a lysimetric experiment after sewage sludge fertilization with doses greater than 10 t/ha. The increase in bioaccumulation of this compound in plant biomass compared to control objects was 138%, 288%, and 505% after application of 20, 30, and 40 t/ha, respectively. Fertilization with sewage sludge did not cause contamination with PAHs in water leachates from the soils.

2008 ◽  
Vol 99 (18) ◽  
pp. 8819-8823 ◽  
Author(s):  
M. Hafidi ◽  
S. Amir ◽  
A. Jouraiphy ◽  
P. Winterton ◽  
M. El Gharous ◽  
...  

2003 ◽  
Vol 48 (4) ◽  
pp. 53-60 ◽  
Author(s):  
E. Trably ◽  
D. Patureau ◽  
J.P. Delgenes

Anaerobically stabilized sewage sludge has potential to partially substitute synthetic fertilizers. The main risk with the recycling of urban sludge on agricultural soils is the accumulation of unwanted products, such as trace metals and organic micropollutants. In this context, the polycyclic aromatic hydrocarbons (PAHs) are particularly monitored because of their toxic properties at low concentrations and their high resistance to biological degradation. The aim of the present study was to optimize PAHs removal during anaerobic digestion of contaminated sewage sludge. Thirteen PAHs were monitored in laboratory-scale anaerobic bioreactors under mesophilic (35°C) and thermophilic (55°C) methanogenic conditions. Abiotic losses were statistically significant for the lightest PAHs, such as fluorene, phenanthrene and anthracene. It was shown that PAH removal was due to a specific biological activity. Biological PAHs removal was significantly enhanced by an increase of the temperature from 35°C to 55°C, especially for the heaviest PAHs. Bioaugmentation experiment was also performed by addition of a PAH-adapted bacterial consortium to a non-acclimated reactor. Significant enhancement of PAHs removal was observed. It was finally shown that PAH removal efficiencies and methanogenic performances were closely linked. The rate of biogas production may be used as an indicator of bacterial activity on PAH removal.


Sign in / Sign up

Export Citation Format

Share Document