scholarly journals Integrating Landsat TM/ETM+ and Numerical Modeling to Estimate Water Temperature in the Tigris River under Future Climate and Management Scenarios

Water ◽  
2019 ◽  
Vol 11 (5) ◽  
pp. 892 ◽  
Author(s):  
Muhanned D. Al-Murib ◽  
Scott A. Wells ◽  
Stefan A. Talke

Modeling the water quality of rivers and assessing the effects of changing conditions is often hindered by a lack of in situ measurements for calibration. Here, we use a combination of satellite measurements, statistical models, and numerical modeling with CE-QUAL-W2 to overcome in situ data limitations and evaluate the effect of changing hydrologic and climate conditions on water temperature (Tw) in the Tigris River, one of the largest rivers in the Middle East. Because few in situ estimates of Tw were available, remotely-sensed estimates of Tw were obtained from Landsat satellite images at roughly 2 week intervals for the year 2009 at the upstream model boundary (Mosul Dam) and two locations further downstream, Baeji and Baghdad. A regression was then developed between air temperature and Landsat Tw in order to estimate daily Tw. These daily Tw were then used for the upstream model boundary condition and for model calibration downstream. Modeled Tw at downstream locations agreed well with Landsat-based statistical estimates with an absolute mean error of <1 °C. A model sensitivity analysis suggested that altering upstream river discharge had little impact on downstream Tw. By contrast, a climate change scenario in which air temperatures were increased by 2 °C resulted in a 0.9 °C and 1.5 °C increase in Tw at Baeji and Baghdad, respectively. Since Tw is a fundamental state variable in water quality models, our approach can be used to improve water quality models when in situ data are scarce.

Water ◽  
2021 ◽  
Vol 13 (1) ◽  
pp. 88
Author(s):  
Xiamei Man ◽  
Chengwang Lei ◽  
Cayelan C. Carey ◽  
John C. Little

Many researchers use one-dimensional (1-D) and three-dimensional (3-D) coupled hydrodynamic and water-quality models to simulate water quality dynamics, but direct comparison of their relative performance is rare. Such comparisons may quantify their relative advantages, which can inform best practices. In this study, we compare two 1-year simulations in a shallow, eutrophic, managed reservoir using a community-developed 1-D model and a 3-D model coupled with the same water-quality model library based on multiple evaluation criteria. In addition, a verified bubble plume model is coupled with the 1-D and 3-D models to simulate the water temperature in four epilimnion mixing periods to further quantify the relative performance of the 1-D and 3-D models. Based on the present investigation, adopting a 1-D water-quality model to calibrate a 3-D model is time-efficient and can produce reasonable results; 3-D models are recommended for simulating thermal stratification and management interventions, whereas 1-D models may be more appropriate for simpler model setups, especially if field data needed for 3-D modeling are lacking.


2018 ◽  
Vol 34 ◽  
pp. 02041
Author(s):  
A.Kadir Adilah ◽  
Yusop Zulkifli ◽  
Z. Noor Zainura ◽  
Baharim N. Bakhiah

Sungai Johor estuary is a vital water body in the south of Johor and greatly affects the water quality in the Johor Straits. In the development of the hydrodynamic and water quality models for Sungai Johor estuary, the Environmental Fluid Dynamics Code (EFDC) model was selected. In this application, the EFDC hydrodynamic model was configured to simulate time varying surface elevation, velocity, salinity, and water temperature. The EFDC water quality model was configured to simulate dissolved oxygen (DO), dissolved organic carbon (DOC), chemical oxygen demand (COD), ammoniacal nitrogen (NH3-N), nitrate nitrogen (NO3-N), phosphate (PO4), and Chlorophyll a. The hydrodynamic and water quality model calibration was performed utilizing a set of site specific data acquired in January 2008. The simulated water temperature, salinity and DO showed good and fairly good agreement with observations. The calculated correlation coefficients between computed and observed temperature and salinity were lower compared with the water level. Sensitivity analysis was performed on hydrodynamic and water quality models input parameters to quantify their impact on modeling results such as water surface elevation, salinity and dissolved oxygen concentration. It is anticipated and recommended that the development of this model be continued to synthesize additional field data into the modeling process.


2016 ◽  
Vol 15 (0) ◽  
pp. 9781780408323-9781780408323
Author(s):  
D. L. Clark ◽  
G. Hunt ◽  
M. S. Kasch ◽  
P. J. Lemonds

1987 ◽  
Vol 19 (7) ◽  
pp. 1197-1202 ◽  
Author(s):  
A. Van Der Beken

2012 ◽  
Vol 55 (4) ◽  
pp. 1241-1247 ◽  
Author(s):  
D. N. Moriasi ◽  
B. N. Wilson ◽  
K. R. Douglas-Mankin ◽  
J. G. Arnold ◽  
P. H. Gowda

2019 ◽  
Vol 24 (1) ◽  
pp. 04018057 ◽  
Author(s):  
Yogesh Khare ◽  
Christopher J. Martinez ◽  
Rafael Muñoz-Carpena ◽  
Adelbert “Del” Bottcher ◽  
Andrew James

2020 ◽  
pp. 349-382
Author(s):  
J.R. Williams ◽  
J.G. Arnold ◽  
C.A. Jones ◽  
V.W. Benson ◽  
R.H. Griggs

Author(s):  
P López-Jiménez ◽  
F Martínez-Solano ◽  
Gonzalo López-Patiño ◽  
Vicente Fuertes-Miquel

2021 ◽  
Author(s):  
◽  
Martha Trodahl

<p>Over the last 50 years freshwater and marine environments have become severely impaired due to contamination from pathogens, heavy metals, sediment, industrial chemicals and nutrients (MEA 2005b). In many countries, including New Zealand, increased nitrogen (N) and phosphorus (P) loading to terrestrial and freshwater environments from diffuse nutrient sources are of particular concern (MEA 2005a; PCE 2015b; Steffen et al. 2015) and many governments now mandate control of diffuse nutrient loss to water. Water quality models are invaluable tools that can assist with decision making around this widespread issue through exploration of the current situation and future scenarios.  Many water quality models exist, functioning at a variety of temporal and spatial scales and varying in detail and complexity. However, few, if any, simultaneously represent sub-field to catchment scale processes and outcomes, both of which are required to fully address water quality issues associated with diffuse nutrient sources. Those that do, likely require extensive time and expertise to operate. Water quality models embedded in the Land Utilisation and Capability Indicator (LUCI), an ecosystem service decision support framework, offer the opportunity to overcome these limitations. Being highly spatially explicit, yet straightforward to use, they can inform and assist individual land owners, catchment managers and other stakeholders with planning, decision making and management of water quality at sub-field to landscape scale.  To model diffuse nutrient losses LUCI, like many catchment scale water quality models, requires some form of estimated nutrient loss, or export coefficient, from land units within the catchment of interest. To be representative export coefficients must consider climate, soil, topography, and land cover and management variables. A number of methods of export coefficient derivation exist, although generally they consider only very limited geo-climatic, land cover and land management variables.  The principal aim of this study is development of algorithms capable of calculating New Zealand site specific N and P export coefficients from detailed geo-climatic, land cover and land management variables, for application in LUCI water quality models. Algorithms for pastoral land cover are developed from a large dataset comprising real pastoral farm input and output data from nutrient budgeting model OVERSEER. Algorithms are extended to land covers other than pasture, albeit in a limited manner. This is achieved through rescaling of the pastoral algorithms to account for relative differences in literature reported N and P losses from pasture and a variety of other New Zealand land covers. Application of the developed algorithms in LUCI water quality models results in positioning of export coefficients at the DEM grid square scale (≤ 15 m x 15 m for New Zealand). In addition, intra-basin configuration is considered in LUCI, at the same grid square scale, as water and nutrient flows are cascaded through the catchment. Application of the export coefficient calculating algorithms are applied to two contrasting New Zealand catchments. Tuapaka catchment, an 85ha agricultural foothill catchment in Manawatu, North Island, and Lake Rotorua catchment, a 502 km2 volcanic, mixed land cover catchment in Bay of Plenty, North Island.  This research is supported by Ravensdown, a farmer owned co-operative, which plans to use LUCI extensively to advise and assist farmers with water quality issues. The ability to model mitigation strategies in LUCI is an important capability. Therefore, this research also includes a review of five particularly important on-farm mitigation strategies, which will later be used by the wider LUCI development team to assist with better parameterisation and improved performance of mitigation options in LUCI.  Application of the developed algorithms at farm to catchment scale in LUCI results in considerably more nuanced, detailed maps and data showing N and P sources and pathways, compared to LUCI’s previously used ‘one export coefficient per land cover’ approach. Although results indicate absolute nutrient loss values are not always ‘correct’ compared to either OVERSEER predictions or in-stream water quality measurements, these differences appear comparable to those seen with similar water quality models. In addition, the issue of representativeness of OVERSEER predictions and in-stream water quality measurements exists.  Nevertheless improvement to absolute predictions is always an aim. This research indicates further improvements to LUCI water quality predictions could result from refinement of both pastoral and other land cover algorithms, and from improved representation of attenuation processes in LUCI, including groundwater representation. However, lack of measured on-land and in-stream N and P loss data is a major challenge to both algorithm refinement and to evaluation of results. In addition, more detailed spatial data would provide more nuanced results from algorithm application.  Although the algorithm application context in this research is LUCI water quality models applied in New Zealand, this does not preclude application of the developed algorithms in other export coefficient based, catchment scale water quality models. Using spatial data pertaining to climate, soil, topographic and land management variables, land units of combined variables can be identified and the algorithms applied, resulting in explicitly positioned export coefficients that can be fed into the catchment scale water quality model of interest. Therefore, developments made here potentially represent a wider contribution to catchment scale modelling using export coefficients.</p>


Sign in / Sign up

Export Citation Format

Share Document