scholarly journals NiO-NiFe2O4-rGO Magnetic Nanomaterials for Activated Peroxymonosulfate Degradation of Rhodamine B

Water ◽  
2019 ◽  
Vol 11 (2) ◽  
pp. 384 ◽  
Author(s):  
Xiaochen Xu ◽  
Yanfang Li ◽  
Guoquan Zhang ◽  
Fenglin Yang ◽  
Ping He
Keyword(s):  
Rhodamine B ◽  
Photoelectron Spectroscopy ◽  
Heterogeneous Catalysts ◽  
Degradation Process ◽  
Catalytic Performance ◽  
Active Species ◽  
Environmental Benefits ◽  
Magnetic Nanomaterials ◽  
Paramagnetic Resonance ◽  
X Ray

Magnetic spinel ferrites that act as heterogeneous catalysts and generate powerful radicals from peroxymono-sulfate (PMS) for the degradation of organic pollutants have received much attention in recent years due to the characteristic of environmental benefits. In this study, NiO-NiFe2O4-rGO magnetic nanomaterials were synthesized using a calcinated Ni-Fe-LDH-rGO precursor. The morphology, structure, and chemical constitution were characterized using X-ray diffraction (XRD), scanning electron microscopy (SEM), X-ray energy dispersive spectroscopy (EDS), transmission electron microscope (TEM), N2 adsorption-desorption isotherms, X-ray photoelectron spectroscopy (XPS), and vibrating sample magnetometer (VSM). The catalytic performance of NiO-NiFe2O4-rGO nanoparticles was thoroughly evaluated for peroxymonosulfate (PMS) activation and its removal of rhodamine B (RhB) from water. The influence of different process parameters on the RhB degradation efficiency was examined. Further, the catalytic stability was evaluated. Under optimized conditions, the NiO-NiFe2O4-rGO/PMS system was very efficient; RhB fully degraded after 40 min at room temperature. Quenching experiments and electronic paramagnetic resonance (EPR) results suggested that SO4−· and OH· were the main active species in the degradation process. Moreover, NiO-NiFe2O4-rGO catalyst was stable without any apparent activity loss after three cycling runs.

scholarly journals Preparation of pod-shaped TiO 2 and Ag@TiO 2 nano burst tubes and their photocatalytic activity

2019 ◽  
Vol 6 (9) ◽  
pp. 191019 ◽  
Author(s):  
Shang Wang ◽  
Zhaolian Han ◽  
Tingting Di ◽  
Rui Li ◽  
Siyuan Liu ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Photocatalytic Activity ◽  
Oxalic Acid ◽  
Ultraviolet Light ◽  
Photoelectron Spectroscopy ◽  
Degradation Process ◽  
Catalytic Performance ◽  
Tetrabutyl Titanate ◽  
Order Kinetic ◽  
X Ray

The pod-shaped TiO 2 nano burst tubes (TiO 2 NBTs) were prepared by the combination of electrospinning and impregnation calcination with oxalic acid (H 2 C 2 O 4 ), polystyrene (PS) and tetrabutyl titanate. The silver nanoparticles (AgNPs) were loaded onto the surface of TiO 2 NBTs by ultraviolet light reduction method to prepare pod-shaped Ag@TiO 2 NBTs. In this work, we analysed the effect of the amount of oxalic acid on the cracking degree of TiO 2 NBTs; the effect of the concentration of AgNO 3 solution on the particle size and loading of AgNPs on the surface of TiO 2 NBTs. Scanning electron microscopy and transmission electron microscopy investigated the surface morphology of samples. X-ray diffraction and X-ray photoelectron spectroscopy characterized the structure and composition of samples. Rhodamine B (RhB) solution was used to evaluate the photocatalytic activity of pod-shaped TiO 2 NBTs and Ag@TiO 2 NBTs. The results showed that TiO 2 NBTs degraded 91.0% of RhB under ultraviolet light, Ag@TiO 2 NBTs degraded 95.5% under visible light for 75 and 60 min, respectively. The degradation process of both samples was consistent with the Langmuir–Hinshelwood first-order kinetic equation. Therefore, the catalytic performance of the sample is: Ag@TiO 2 NBTs > TiO 2 NBTs > TiO 2 nanotubes.

scholarly journals Preparation and Photocatalytic Performances of WO3/TiO2 Composite Nanofibers

2020 ◽  
Vol 2020 ◽  
pp. 1-12
Author(s):  
Xiuping Han ◽  
Binghua Yao ◽  
Keying Li ◽  
Wenjing Zhu ◽  
Xuyuan Zhang
Keyword(s):  
Photoelectron Spectroscopy ◽  
Photocatalytic Oxidation ◽  
Composite Nanofibers ◽  
Photogenerated Electron ◽  
Xrd Analysis ◽  
Catalytic Performance ◽  
Active Species ◽  
X Ray ◽  
Bet Analysis ◽  
Electron Holes

The use of sunlight for photocatalytic oxidation is an ideal strategy, but it is limited by factors such as insufficient light absorption intensity of the photocatalyst and easy recombination of photogenerated electron holes. TiO2 is favored by researchers as an environment-friendly catalyst. In this paper, TiO2 is combined with WO3 to obtain a nanofiber with excellent catalytic performance under sunlight. The WO3/TiO2 composite nanofibers were synthesized by using the electrospinning method. The X-ray diffraction (XRD) analysis indicated that WO3 was successfully integrated onto the surface of TiO2. The photodegradation performance and photocurrent analysis of the prepared nanofibers showed that the addition of WO3 really improved the photocatalytic performance of TiO2 nanofibers, methylene blue (MB) degradation rate increased from 72% to 96%, and 5% was the optimal composite mole percentage of W to Ti. The scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS), UV-Vis diffuse reflectance spectra (UV-Vis DRS), and Brunauer-Emmett-Teller (BET) analysis further characterized the properties of 5% WO3/TiO2 nanofibers. The H2 generation rate of 5% WO3/TiO2 nanofibers was 107.15 μmol·g−1·h−1, in comparison with that of TiO2 nanofibers (73.21 μmol·g−1·h−1) under the same condition. The 5% WO3/TiO2 produced ·OH under illumination, which played an important role in the MB degradation. Also, the enhanced photocatalytic mechanism was also proposed based on the detailed analysis of the band gap and the active species trapping experiment. The results indicated that the effective separation of Z-scheme photogenerated electron-hole pairs and transfer system constructed between TiO2 and WO3 endowed the excellent photocatalytic activity of 5% WO3/TiO2 nanofibers.

scholarly journals Visible Light-Driven Mn-MoS2/rGO Composite Photocatalysts for the Photocatalytic Degradation of Rhodamine B

2020 ◽  
Vol 2020 ◽  
pp. 1-10
Author(s):  
Thi Thuy Trang Phan ◽  
Thanh Tam Truong ◽  
Ha Tran Huu ◽  
Le Tuan Nguyen ◽  
Van Thang Nguyen ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Visible Light ◽  
Rhodamine B ◽  
Photoelectron Spectroscopy ◽  
Diffuse Reflectance Spectroscopy ◽  
Electron Paramagnetic Resonance Spectroscopy ◽  
Resonance Spectroscopy ◽  
Paramagnetic Resonance ◽  
X Ray ◽  
Composite Photocatalysts

The n%Mn-MoS2/rGO (labeled as n%MMS/rGO, where n% = Mn/(Mn + Mo) in mol) composites were successfully prepared by a facile hydrothermal method from the Mn-MoS2 (MMS) and rGO precursors, in which the MMS was obtained by a facile one-step calcination of (NH4)6Mo7O24·4H2O, (NH2)2CS, and Mn(CH3COO)2·4H2O as precursors in N2 gas at 650°C. The samples were characterized using X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), transmission electron microscopy (TEM), electron paramagnetic resonance spectroscopy (EPR), UV-visible diffuse reflectance spectroscopy (UV-Vis DRS), and X-ray photoelectron spectroscopy (XPS), which indicates the composites containing nanosheets of Mn-MoS2 and rGO components. The photocatalytic activities of the n%MMS/rGO composite photocatalysts were evaluated through the photodegradation of rhodamine B (RhB) under the visible light irradiation. The enhancement in the photocatalytic performance of the achieved composites was attributed to the synergic effect of Mn doping and rGO matrix. The investigation of photocatalytic mechanism was also conducted.

Strong synergy in the activation of peroxymonosulfate with Cu-Fe spinel/γ-Al2O3 composites for atrazine degradation

2019 ◽  
Vol 26 (2) ◽  
pp. 55-62
Author(s):  
Yong Feng ◽  
Kaimin Shih
Keyword(s):  
Photoelectron Spectroscopy ◽  
Heterogeneous Catalysts ◽  
Cost Effective ◽  
Order Rate Constant ◽  
Active Species ◽  
Composite Catalyst ◽  
Sulfate Radicals ◽  
Treatment Technology ◽  
X Ray ◽  
Composite Catalysts

Persulfates work effectively in a wide pH range and present great potential for wastewater purification. However, the development of efficient, cost-effective, and environmentally friendly heterogeneous catalysts is still challenging. In this study, an innovative catalyst for peroxymonosulfate (PMS) activation to degrade target contaminant atrazine is proposed. The catalyst is based on a combination of Cu-Fe spinel (CuFe2O4) and aluminium oxide (γ-Al2O3). The samples synthesised were fully characterised by X-ray diffraction, scanning electron microscopy, and X-ray photoelectron spectroscopy. The results show that all composite catalysts (CCs) had greater catalytic reactivity than spinel; the degradation of atrazine increased from 49%-94% when Cu-Fe spinel was replaced by a composite catalyst (CuFe2O4: γ-Al2O3 = 1:1; CC1). When the loading of Cu-Fe metals was equivalent, the pseudo-first-order rate constant with CC1 (0.37 min–1) was around 37 times that with Cu-Fe spinel (0.01 min–1). Both sulfate radicals and hydroxyl radicals were found to be the active species generated during the activation of PMS by CCs, and sulfate radicals were primarily responsible for the degradation of atrazine. The findings from this study will contribute to the advancement of wastewater treatment technology in Hong Kong and the rest of the world.

scholarly journals Complete Benzene Oxidation over Mono and Bimetallic Pd—Au Catalysts on Alumina-Supported Y-Doped Ceria

2020 ◽  
Vol 10 (3) ◽  
pp. 1088
Author(s):  
Tabakova ◽  
Ilieva ◽  
Petrova ◽  
Venezia ◽  
Karakirova ◽  
...  
Keyword(s):  
Photoelectron Spectroscopy ◽  
Cost Effective ◽  
Catalytic Performance ◽  
Benzene Oxidation ◽  
Doped Ceria ◽  
Mechanical Mixing ◽  
Paramagnetic Resonance ◽  
X Ray ◽  
High Performing ◽  
Catalyst Composition

The protection of environment and human health stimulates intensive research for abatement of volatile organic compounds (VOCs) in the atmosphere. Complete catalytic oxidation is an efficient, environmentally friendly and economically feasible method for elimination of VOCs. This study aims to design high performing and cost-effective catalytic formulations by exploration of appropriate and economically viable supports. Alumina-supported ceria (30 wt.%) and Y2O3 (1 wt.%)-doped ceria were prepared by mechanical mixing and were used as support of mono Au (2 wt.%) and Pd (1 wt.%) and bimetallic Pd-Au catalysts. The characterization by textural measurements, X-ray powder diffraction (PXRD), X-ray photoelectron spectroscopy (XPS), EPR (electron paramagnetic resonance) and temperature-programmed reduction (TPR) was carried out in order to clarify the relationship between catalyst composition, textural, structural and surface properties, reducibility and catalytic performance for complete benzene oxidation. Among all studied catalysts, Pd-based catalysts exhibited the best combustion activity. In particular, monometallic Pd on alumina supported Y-doped ceria attained 100% of complete benzene conversion at 180 °C. These catalytic materials have potential to meet stringent emission regulations in an economical and effective way.

Jellyfish-like few-layer graphene nanoflakes: high paramagnetic response alongside increased interlayer interaction

2021 ◽  
Vol 0 (0) ◽  
Author(s):  
Alexander Ulyanov ◽  
Dmitrii Stolbov ◽  
Serguei Savilov
Keyword(s):  
Photoelectron Spectroscopy ◽  
High Sensitivity ◽  
Paramagnetic Centers ◽  
Interlayer Interaction ◽  
Paramagnetic Resonance ◽  
X Ray ◽  
Graphene Nanoflakes ◽  
Few Layer Graphene ◽  
Electron Paramagnetic ◽  
Hydrocarbon Pyrolysis

Abstract Jellyfish-like graphene nanoflakes (GNF), prepared by hydrocarbon pyrolysis, are studied with electron paramagnetic resonance (EPR) method. The results are supported by X-ray photoelectron spectroscopy (XPS) data. Oxidized (GNFox) and N-doped oxidized (N-GNFox) flakes exhibit an extremely high EPR response associated with a large interlayer interaction which is caused by the structure of nanoflakes and layer edges reached by oxygen. The GNFox and N-GNFox provide the localized and mobile paramagnetic centers which are silent in the pristine (GNF p ) and N-doped (N-GNF) samples. The change in the relative intensity of the line corresponding to delocalized electrons is parallel with the number of radicals in the quaternary N-group. The environment of localized and mobile electrons is different. The results can be important in GNF synthesis and for explanation of their features in applications, especially, in devices with high sensitivity to weak electromagnetic field.

scholarly journals Ambient base-free glycerol oxidation over bimetallic PdFe/SiO2 by in situ generated active oxygen species

2021 ◽  
Author(s):  
Ricci Underhill ◽  
Mark Douthwaite ◽  
Richard J. Lewis ◽  
Peter J. Miedziak ◽  
Robert D. Armstrong ◽  
...  
Keyword(s):  
Heterogeneous Catalysts ◽  
Bimetallic Catalyst ◽  
Electron Paramagnetic Resonance Spectroscopy ◽  
Active Oxygen Species ◽  
Catalytic Performance ◽  
Resonance Spectroscopy ◽  
Oxygen Species ◽  
Paramagnetic Resonance ◽  
Temperature Oxidation

AbstractLow temperature oxidation of alcohols over heterogeneous catalysts is exceptionally challenging, particularly under neutral conditions. Herein, we report on an efficient, base-free method to oxidise glycerol over a 0.5%Pd-0.5%Fe/SiO2 catalyst at ambient temperature in the presence of gaseous H2 and O2. The exceptional catalytic performance was attributed to the in situ formation of highly reactive surface-bound oxygenated species, which promote the dehydrogenation on the alcohol. The PdFe bimetallic catalyst was determined to be significantly more active than corresponding monometallic analogues, highlighting the important role both metals have in this oxidative transformation. Fe leaching was confirmed to occur over the course of the reaction but sequestering experiments, involving the addition of bare carbon to the reactions, confirmed that the reaction was predominantly heterogeneous in nature. Investigations with electron paramagnetic resonance spectroscopy suggested that the reactivity in the early stages was mediated by surface-bound reactive oxygen species; no homogeneous radical species were observed in solution. This theory was further evidenced by a direct H2O2 synthesis study, which confirmed that the presence of Fe in the bimetallic catalyst neither improved the synthesis of H2O2 nor promoted its decomposition over the PdFe/SiO2 catalyst.

Mixed Metal Oxide Interfaces: An Experimental and Theoretical Assessment of Secondary Metal Influences in Metal Impregnated Aluminas

1994 ◽  
Vol 368 ◽  
Author(s):  
M. Malaty ◽  
D. Singh ◽  
R. Schaeffer ◽  
S. Jansen ◽  
S. Lawrence
Keyword(s):  
Photoelectron Spectroscopy ◽  
Theoretical Calculations ◽  
Mixed Metal Oxide ◽  
X Ray Diffraction ◽  
Paramagnetic Resonance ◽  
X Ray ◽  
Mixed Metal ◽  
Metal Interactions ◽  
Metal Metal ◽  
Bimetallic System

ABSTRACTStudies of the mixed-metal interface in metal impregnated alumina have indicated the possibility of much metal-metal and metal-substrate interaction. Studies were carried out on NiCu/Al2O3 system which was evaluated to develop a better understanding of the forces that drive modification of the catalytic selectivity of Ni in the presence of Cu. Electron Paramagnetic Resonance (EPR), Powder X-ray Photoelectron Spectroscopy (XPS), X-ray Diffraction (XRD) and theoretical calculations were carried out on this bimetallic system, using Ni,Ag/Al2O3 as a reference as Ni shows negligible electron perturbation on co-adsorbance with Ag onto alumina. XRD results indicate that gross modification of the electronic fields of Ni and Cu are due to direct coupling and intercalation into the alumina matrix. As a result of this phenomena, these materials may form a good base for the development of novel ceramics based on mixed-metal interactions where the intermetallic perturbations are driven by the substrate effects.

Preparation of Novel Ag–Si–TiO2 Composite and Research on Its Photocatalytic Degradation of Formaldehyde

2021 ◽  
Vol 13 (3) ◽  
pp. 371-380
Author(s):  
Yongjun Wu ◽  
Nina Xie ◽  
Lu Yu
Keyword(s):  
Photoelectron Spectroscopy ◽  
Removal Rate ◽  
Sol Gel ◽  
Catalytic Performance ◽  
Formaldehyde Concentration ◽  
Order Kinetic ◽  
Solution Ph ◽  
Visible Absorption ◽  
X Ray ◽  
Co Doped

A novel Ag–Si–TiO2 composite was prepared via sol–gel method for removing residual formaldehyde in shiitake mushroom. The structure of Ag–Si–TiO2 composite was characterized by scanning electron microscope (SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS) analyses. Ultraviolet-visible absorption spectroscopy (UV-Vis) and N2 adsorption-desorption tests showed that Ag and Si co-doped decreased the band gap, the Brunauer-Emmett-Teller (BET) specific surface area of the samples increased and the recombination probability of electron-hole pairs (e--h+) reduced. Effect on removal rate of formaldehyde with different Ag-Si co-doped content, formaldehyde concentration and solution pH were investigated, and the results showed that 6.0 wt%Ag-3.0 wt%Si-TiO2 samples had an optimum catalytic performance, and the degradation efficiency reached 96.6% after 40 W 365 nm UV lamp irradiation for 360 min. The kinetics of formaldehyde degradation by Ag–Si–TiO2 composite photocatalyst could be described by Langmuir-Hinshelwood first-order kinetic model.

Sign in / Sign up

Export Citation Format

Share Document