scholarly journals Numerical Model of Supersaturated Total Dissolved Gas Dissipation in a Channel with Vegetation

Water ◽  
2018 ◽  
Vol 10 (12) ◽  
pp. 1769 ◽  
Author(s):  
Youquan Yuan ◽  
Yinghan Huang ◽  
Jingjie Feng ◽  
Ran Li ◽  
Ruidong An ◽  
...  
Keyword(s):  
Flood Control ◽  
Three Dimensional ◽  
Vegetation Density ◽  
Dissolved Gas ◽  
Two Phase ◽  
Total Dissolved Gas ◽  
Dissipation Coefficient ◽  
Dissipation Model ◽  
Average Water ◽  
The Impact

The recent construction and operation of high dams have greatly changed the natural flood process. To meet the ecological demands and flood control requirements of rivers, dams discharge flow through the flood discharge facility, always accompanied by total dissolved gas (TDG) supersaturation in the water, which is harmful to fish. The purpose of this paper is to explore the dissipation characteristics and prediction methods of supersaturated TDG in water flowing through a floodplain covered with vegetation. A three-dimensional two-phase supersaturated TDG transportation and dissipation model considering the effects of vegetation was established. Using existing mechanism experimental results, the inner dissipation coefficient kin of TDG in vegetation-affected flows was studied, and the quantitative relationships between the inner dissipation coefficient kin and the average flow velocity, average water depth, average water radius, Reynolds number, and vegetation density were characterized. Based on the simulation results, the distribution characteristics of the supersaturated TDG in water around vegetation and in the vertical, lateral, and longitudinal directions of the flume under different flow and vegetation densities were analyzed. A supersaturated TDG transportation and dissipation model for vegetation-affected flow is proposed and can be used to predict the impact of TDG in a floodplain.

scholarly journals Run-Up Simulation of a Semi-Floating Ring Supported Turbocharger Rotor Considering Thrust Bearing and Mass-Conserving Cavitation

Lubricants ◽  
2021 ◽  
Vol 9 (4) ◽  
pp. 44
Author(s):  
Christian Ziese ◽  
Cornelius Irmscher ◽  
Steffen Nitzschke ◽  
Christian Daniel ◽  
Elmar Woschke
Keyword(s):  
Reynolds Equation ◽  
Energy Equation ◽  
Thrust Bearing ◽  
Three Dimensional ◽  
Reliable Prediction ◽  
Two Phase ◽  
Hydrodynamic Bearings ◽  
Thrust Bearings ◽  
Run Up ◽  
The Impact

The vibration behaviour of turbocharger rotors is influenced by the acting loads as well as by the type and arrangement of the hydrodynamic bearings and their operating condition. Due to the highly non-linear bearing behaviour, lubricant film-induced excitations can occur, which lead to sub-synchronous rotor vibrations. A significant impact on the oscillation behaviour is attributed to the pressure distribution in the hydrodynamic bearings, which is influenced by the thermo-hydrodynamic conditions and the occurrence of outgassing processes. This contribution investigates the vibration behaviour of a floating ring supported turbocharger rotor. For detailed modelling of the bearings, the Reynolds equation with mass-conserving cavitation, the three-dimensional energy equation and the heat conduction equation are solved. To examine the impact of outgassing processes and thrust bearing on the occurrence of sub-synchronous rotor vibrations separately, a variation of the bearing model is made. This includes run-up simulations considering or neglecting thrust bearings and two-phase flow in the lubrication gap. It is shown that, for a reliable prediction of sub-synchronous vibrations, both the modelling of outgassing processes in hydrodynamic bearings and the consideration of thrust bearing are necessary.

scholarly journals Experimental Study on the Effects of Vegetation on the Dissipation of Supersaturated Total Dissolved Gas in Flowing Water

2019 ◽  
Vol 16 (13) ◽  
pp. 2256 ◽  
Author(s):  
Zhenhua Wang ◽  
Jingying Lu ◽  
Youquan Yuan ◽  
Yinghan Huang ◽  
Jingjie Feng ◽  
...  
Keyword(s):  
Retention Time ◽  
Influence Factors ◽  
Flowing Water ◽  
Dissolved Gas ◽  
Dissipation Process ◽  
Total Dissolved Gas ◽  
Dissipation Coefficient ◽  
Nonlinear Fitting ◽  
Prediction Systems ◽  
High Dams

High dam discharge can lead to total dissolved gas (TDG) supersaturation in the downstream river, and fish in the TDG-supersaturated flow can suffer from bubble disease and even die. Consequently, it is of great value to study the transport and dissipation characteristics of supersaturated dissolved gas for the protection of river fish. Floodplains may form downstream of high dams due to flood discharge, and the plants on these floodplains can affect both the hydraulic characteristics and TDG transport of the flowing water. In this study, the velocity distribution and the retention response time under different flow conditions and vegetation arrangements were studied in a series of experiments. The retention time was significantly extended by the presence of vegetation, and an empirical formula for calculating the retention time was proposed. In addition, the responses of the dissipation process of supersaturated TDG to hydraulic factors, retention time, and vegetation area coefficient were analyzed. The dissipation of supersaturated TDG significantly increased with increases in the vegetation area coefficient in the water. To quantitatively describe the TDG dissipation process in TDG-supersaturated flow under the effect of vegetation, the TDG dissipation coefficient was fitted and analyzed. The basic form of the formula for the dissipation coefficient involving various influence factors was determined by dimensional analysis. An equation for calculating the TDG dissipation coefficient of flowing water with vegetation was proposed by multivariate nonlinear fitting and was proven to have great prediction accuracy. The calculated method developed in this paper can be used to predict TDG dissipation in flowing water with vegetation and is of great significance for enriching TDG prediction systems.

Computational Study of Edge Cooling for Open-Cathode Polymer Electrolyte Fuel Cell Stacks

2012 ◽  
Vol 9 (6) ◽  
Author(s):  
Agus P. Sasmito ◽  
Tariq Shamim ◽  
Erik Birgersson ◽  
Arun S. Mujumdar
Keyword(s):  
Fuel Cell ◽  
Polymer Electrolyte ◽  
Thermal Management ◽  
Computational Study ◽  
Three Dimensional ◽  
Polymer Electrolyte Fuel Cell ◽  
Design Parameters ◽  
Two Phase ◽  
Practical Applications ◽  
The Impact

In open-cathode polymer electrolyte fuel cell (PEFC) stacks, a significant temperature rise can exist due to insufficient cooling, especially at higher current densities. To improve stack thermal management while reducing the cost of cooling, we propose a forced air-convection open-cathode fuel cell stack with edge cooling (fins). The impact of the edge cooling is studied via a mathematical model of the three-dimensional two-phase flow and the associated conservation equations of mass, momentum, species, energy, and charge. The model includes the stack, ambient, fan, and fins used for cooling. The model results predict better thermal management and stack performance for the proposed design as compared to the conventional open-cathode stack design, which shows potential for practical applications. Several key design parameters—fin material and fin geometry—are also investigated with regard to the stack performance and thermal management.

Computational Study of Edge Cooling for Open-Cathode Polymer Electrolyte Fuel Cell Stacks

2012 ◽  
Author(s):  
Agus Pulung Sasmito ◽  
Tariq Shamim ◽  
Erik Birgersson ◽  
Arun Sadashiv Mujumdar
Keyword(s):  
Fuel Cell ◽  
Polymer Electrolyte ◽  
Thermal Management ◽  
Computational Study ◽  
Three Dimensional ◽  
Polymer Electrolyte Fuel Cell ◽  
Design Parameters ◽  
Two Phase ◽  
Forced Air ◽  
The Impact

In open-cathode polymer electrolyte fuel cell (PEFC) stacks, a significant temperature rise can exist due to insufficient cooling, especially at higher current densities. To improve stack thermal management whilst reducing the cost for cooling, we propose a forced air-convection open-cathode fuel cell stack with edge cooling (fins). The impact of the edge cooling is studied via mathematical model of the three-dimensional two-phase flow and associated conservation equations of mass, momentum, species, energy and charge. The model includes stack, ambient, fan and fins used for cooling. The model results predict better thermal management and stack performance for the proposed design as compared to the conventional open-cathode stack design, which shows potential for practical application. Several key design parameters — fin material and fin geometry — are also investigated with regards to the stack performance and thermal management.

scholarly journals Bubble Dynamics in a Narrow Gap Flow under the Influence of Pressure Gradient and Shear Flow

Fluids ◽  
2020 ◽  
Vol 5 (4) ◽  
pp. 208
Author(s):  
Peter Reinke ◽  
Jan Ahlrichs ◽  
Tom Beckmann ◽  
Marcus Schmidt
Keyword(s):  
Shear Flow ◽  
Pressure Gradient ◽  
High Speed ◽  
Bubble Dynamics ◽  
Three Dimensional ◽  
High Speed Imaging ◽  
Two Phase ◽  
Bubble Generation ◽  
Gap Flow ◽  
The Impact

The volume-of-flow method combined with the Rayleigh–Plesset equation is well established for the computation of cavitation, i.e., the generation and transportation of vapor bubbles inside a liquid flow resulting in cloud, sheet or streamline cavitation. There are, however, limitations, if this method is applied to a restricted flow between two adjacent walls and the bubbles’ size is of the same magnitude as that of the clearance between the walls. This work presents experimental and numerical results of the bubble generation and its transportation in a Couette-type flow under the influence of shear and a strong pressure gradient which are typical for journal bearings or hydraulic seals. Under the impact of variations of the film thickness, the VoF method produces reliable results if bubble diameters are less than half the clearance between the walls. For larger bubbles, the wall contact becomes significant and the bubbles adopt an elliptical shape forced by the shear flow and under the influence of a strong pressure gradient. Moreover, transient changes in the pressure result in transient cavitation, which is captured by high-speed imaging providing material to evaluate transient, three-dimensional computations of a two-phase flow.

Investigation into the Total Dissolved Gas Dynamics of Wells Dam Using a Two-Phase Flow Model

2011 ◽  
Vol 137 (10) ◽  
pp. 1257-1268 ◽  
Author(s):  
M. Politano ◽  
A. Arenas Amado ◽  
S. Bickford ◽  
J. Murauskas ◽  
D. Hay
Keyword(s):  
Gas Dynamics ◽  
Flow Model ◽  
Two Phase Flow ◽  
Phase Flow ◽  
Dissolved Gas ◽  
Two Phase ◽  
Total Dissolved Gas
Sign in / Sign up

Export Citation Format

Share Document