scholarly journals Research on the Hydrophilicity of Non-Coal Kaolinite and Coal Kaolinite from the Viewpoint of Experiments and DFT Simulations

Symmetry ◽  
2020 ◽  
Vol 12 (7) ◽  
pp. 1199
Author(s):  
Peng Xi ◽  
Ruixin Ma ◽  
Wenli Liu
Keyword(s):  
Contact Angle ◽  
Hydrogen Atom ◽  
Oxygen Atom ◽  
Water Molecule ◽  
Density Functional ◽  
Physical Adsorption ◽  
Key Factor ◽  
The Difference ◽  
Kaolinite Surface ◽  
Single Water Molecule

Coal is often coated by coal kaolinite in flotation, resulting in an increase in concentrate ash. The natural hydrophilicity of minerals is the key factor to determining its flotation behavior. The results of studies on the contact angle of non-coal kaolinite and coal kaolinite samples found that the contact angle of coal kaolinite was bigger than that of non-coal kaolinite and the hydrophilicity of the latter was stronger. To investigate the mechanism of the hydrophilic difference between non-coal kaolinite and coal kaolinite, the adsorption of a single water molecule on non-coal kaolinite and coal kaolinite (100) and (00 1 ¯ ) surfaces was calculated with the first principle method of the density functional theory (DFT). The calculation results showed that hydrogen bonds were formed between the hydrogen atom and the oxygen atom of the surface and the hydrogen atom and the oxygen atom of the water molecule after the water molecule was adsorbed on the kaolinite (100) and (00 1 ¯ ) surface. The adsorption process of water molecules on the kaolinite surface was physical adsorption with Van der Waals force existing between them. Regardless of whether the kaolinite (001) surface or the kaolinite (00 1 ¯ ) surface was doped with a carbon atom, the adsorption of a single water molecule was weakened, with a weaker hydrogen bond formed. The calculated results explained the difference of hydrophilicity between non-coal kaolinite and coal kaolinite samples from the molecular and atomic viewpoint.

scholarly journals Understanding Cement Hydration of Cemented Paste Backfill: DFT Study of Water Adsorption on Tricalcium Silicate (111) Surface

Minerals ◽  
2019 ◽  
Vol 9 (4) ◽  
pp. 202 ◽  
Author(s):  
Chongchong Qi ◽  
Lang Liu ◽  
Jianyong He ◽  
Qiusong Chen ◽  
Li-Juan Yu ◽  
...  
Keyword(s):  
Water Molecule ◽  
Density Functional ◽  
Cement Hydration ◽  
Cementitious Materials ◽  
Dissociative Adsorption ◽  
Molecular Adsorption ◽  
Cemented Paste Backfill ◽  
Adsorption Mechanisms ◽  
Paste Backfill ◽  
Single Water Molecule

Understanding cement hydration is of crucial importance for the application of cementitious materials, including cemented paste backfill. In this work, the adsorption of a single water molecule on an M3-C3S (111) surface is investigated using density functional theory (DFT) calculations. The adsorption energies for 14 starting geometries are calculated and the electronic properties of the reaction are analysed. Two adsorption mechanisms, molecular adsorption and dissociative adsorption, are observed and six adsorption configurations are found. The results indicate that spontaneous dissociative adsorption is energetically favored over molecular adsorption. Electrons are transferred from the surface to the water molecule during adsorption. The density of states (DOS) reveals the bonding mechanisms between water and the surface. This study provides an insight into the adsorption mechanism at an atomic level, and can significantly promote the understanding of cement hydration within such systems.

scholarly journals Role of Mg Impurity in the Water Adsorption over Low-Index Surfaces of Calcium Silicates: A DFT-D Study

Minerals ◽  
2020 ◽  
Vol 10 (8) ◽  
pp. 665
Author(s):  
Chongchong Qi ◽  
Qiusong Chen ◽  
Andy Fourie
Keyword(s):  
Water Molecule ◽  
Density Functional ◽  
Water Adsorption ◽  
Dissociative Adsorption ◽  
Mg Doping ◽  
Calcium Silicates ◽  
Single Water Molecule ◽  
The Impact ◽  
Mg Doped

Calcium silicates are the most predominant phases in ordinary Portland cement, inside which magnesium is one of the momentous impurities. In this work, using the first-principles density functional theory (DFT), the impurity formation energy (Efor) of Mg substituting Ca was calculated. The adsorption energy (Ead) and configuration of the single water molecule over Mg-doped β-dicalcium silicate (β-C2S) and M3-tricalcium silicate (M3-C3S) surfaces were investigated. The obtained Mg-doped results were compared with the pristine results to reveal the impact of Mg doping. The results show that the Efor was positive for all but one of the calcium silicates surfaces (ranged from −0.02 eV to 1.58 eV), indicating the Mg substituting for Ca was not energetically favorable. The Ead of a water molecule on Mg-doped β-C2S surfaces ranged from –0.598 eV to −1.249 eV with the molecular adsorption being the energetically favorable form. In contrast, the Ead on M3-C3S surfaces ranged from −0.699 eV to −4.008 eV and the more energetically favorable adsorption on M3-C3S surfaces was dissociative adsorption. The influence of Mg doping was important since it affected the reactivity of surface Ca/Mg sites, the Ead of the single water adsorption, as well as the adsorption configuration compared with the water adsorption on pristine surfaces.

scholarly journals DFT Study into the Influence of Carbon Material on the Hydrophobicity of a Coal Pyrite Surface

Molecules ◽  
2019 ◽  
Vol 24 (19) ◽  
pp. 3534 ◽  
Author(s):  
Peng Xi ◽  
Donghui Wang ◽  
Wenli Liu ◽  
Changsheng Shi
Keyword(s):  
Carbon Atom ◽  
Water Molecule ◽  
Density Functional ◽  
Valence Bond ◽  
Covalent Bond ◽  
Point Of View ◽  
Pyrite Surface ◽  
Adsorbed Carbon ◽  
Single Water Molecule ◽  
The Impact

From the macroscopic point of view, the hydrophilicity of symbiotic carbon pyrite is weakened overall compared to that of pure pyrite. It is very important to explain the impact of elemental carbon accreted on a pyrite surface on the surface’s hydrophobicity from the perspective of quantum chemistry. To study the influence of adsorbed carbon atoms on the hydrophilicity of a coal pyrite surface versus a pyrite surface, the adsorption of a single water molecule at an adjacent Fe site of a one-carbon-atom-covered pyrite surface and a carbon atom monolayer were simulated and calculated with the first-principles method of density functional theory (DFT). The water molecules can be stably adsorbed at the adjacent Fe site of the carbon-atom-covered pyrite surface. The hybridization of the O 2p (H2O) and Fe 3d (pyrite surface) orbitals was the main interaction between the water molecule and the pyrite surface, forming a strong Fe–O covalent bond. The water molecule only slightly adsorbs above a C atom on the carbon-atom-covered pyrite and the carbon atom monolayer surfaces. The valence bond between the water molecule and the pyrite surface changed from an Fe–O bond to an Fe–C–O bond, in which the C–O bond is very weak, resulting in a weaker interaction between water and the surface.

ISOTOPE EFFECTS IN NEUTRAL H2O–D2O IRRADIATED SOLUTIONS AND THE NATURE OF THE REDUCING RADICAL

1962 ◽  
Vol 40 (10) ◽  
pp. 1903-1908 ◽  
Author(s):  
Chava Lifshitz
Keyword(s):  
Hydrogen Atom ◽  
Water Molecule ◽  
Isotope Effect ◽  
Isotope Effects ◽  
Sodium Formate ◽  
Alternative Possibilities ◽  
X Rays ◽  
Deuterium Isotope Effect ◽  
Deuterium Concentration ◽  
Single Water Molecule

Neutral solutions of sodium formate in H2O–D2O mixtures were irradiated by 200-kv X rays. The atomic deuterium isotope effect (αA) and its dependence on deuterium concentration were determined. In a 1 × 10−1 M HCOONa, 96% D2O solution, G(hydrogen) = 1.14 and αA = 4.3. It is concluded that the hydrogen atom cannot be formed from a single water molecule. Possible mechanisms of hydrogen atom formation are discussed. The alternative possibilities for the atoms to react as H or H2O− are viewed in the light of the proposed mechanisms.

scholarly journals Revisiting the reactivity between HCO and CH3 on interstellar grain surfaces

2020 ◽  
Vol 493 (2) ◽  
pp. 2523-2527 ◽  
Author(s):  
J Enrique-Romero ◽  
S Álvarez-Barcia ◽  
F J Kolb ◽  
A Rimola ◽  
C Ceccarelli ◽  
...  
Keyword(s):  
Water Molecule ◽  
Energy Barrier ◽  
Density Functional ◽  
High Energy ◽  
Functional Theory ◽  
Radical Coupling ◽  
High Energy Barrier ◽  
Single Water Molecule ◽  
Complex Organic

ABSTRACT The formation of interstellar complex organic molecules is currently thought to be dominated by the barrierless coupling between radicals on the interstellar icy grain surfaces. Previous standard density functional theory (DFT) results on the reactivity between CH3 and HCO on amorphous water surfaces showed that the formation of CH4 + CO by H transfer from HCO to CH3 assisted by water molecules of the ice was the dominant channel. However, the adopted description of the electronic structure of the biradical (i.e. CH3/HCO) system was inadequate [without the broken-symmetry (BS) approach]. In this work, we revisit the original results by means of BS-DFT both in gas phase and with one water molecule simulating the role of the ice. Results indicate that the adoption of BS-DFT is mandatory to describe properly biradical systems. In the presence of the single water molecule, the water-assisted H transfer exhibits a high energy barrier. In contrast, CH3CHO formation is found to be barrierless. However, direct H transfer from HCO to CH3 to give CO and CH4 presents a very low energy barrier, hence being a potential competitive channel to the radical coupling and indicating, moreover, that the physical insights of the original work remain valid.

Influence of water on the CH3O˙ + O2 → CH2O + HO2˙ reaction

2019 ◽  
Vol 21 (28) ◽  
pp. 15734-15741 ◽  
Author(s):  
Subhasish Mallick ◽  
Amit Kumar ◽  
Brijesh Kumar Mishra ◽  
Pradeep Kumar
Keyword(s):  
Density Functional Theory ◽  
Electronic Structure ◽  
Water Molecule ◽  
Density Functional ◽  
Electronic Structure Calculations ◽  
Functional Theory ◽  
Influence Of Water ◽  
Single Water Molecule ◽  
Structure Calculations

Electronic structure calculations employing density functional theory have been used to study the effect of a single water molecule on the CH3O˙ + O2 → CH2O + HO2˙ reaction.

scholarly journals Molecular Modeling of Ammonia Gas Adsorption onto the Kaolinite Surface with DFT Study

Minerals ◽  
2020 ◽  
Vol 10 (1) ◽  
pp. 46 ◽  
Author(s):  
Qi Cheng ◽  
Yongbing Li ◽  
Xiaojuan Qiao ◽  
Yang Guo ◽  
Yang Zhao ◽  
...  
Keyword(s):  
Hydrogen Atom ◽  
Density Functional ◽  
Gas Adsorption ◽  
Hydroxyl Group ◽  
Partial Density ◽  
Hydroxyl Groups ◽  
High Porosity ◽  
Ammonia Gas ◽  
Nh3 Adsorption ◽  
Kaolinite Surface

With high porosity and being one of the most abundant clay minerals, dried kaolinite may be an excellent adsorbent to remove ammonia gas (NH3). Here, the plane wave pseudopotential method based on density functional theory (DFT) was used to explore the mechanism of ammonia gas adsorption on the dried kaolinite, the Mulliken electric charge, and the partial density of states of atoms of the NH3/kaolinite (001) system. NH3 adsorption on kaolinite can happen in three different type adsorption positions: “top”, “bridge” and “hollow”. The “hollow” position is enclosed by two "upright" hydroxyl groups perpendicular to the (001) surface of kaolinite and a "lying" hydroxyl group parallel to the surface. At this position, the adsorption is the most stable and has the highest adsorption energy. The nitrogen atom of the NH3 molecule bonds with the hydrogen atom in the "upright" hydroxyl group on the (001) surface and its hydrogen atom forms HN…O hydrogen bond with oxygen atom in the "lying" hydroxyl group, which leads to the NH3 stably adsorbed on kaolinite (001) surface. A small part of electrons transfer between NH3 molecules and kaolinite creates weakly electrostatic adsorption between them.

On the Ag+–cytosine interaction: the effect of microhydration probed by IR optical spectroscopy and density functional theory

2015 ◽  
Vol 17 (39) ◽  
pp. 25915-25924 ◽  
Author(s):  
Matias Berdakin ◽  
Vincent Steinmetz ◽  
Philippe Maitre ◽  
Gustavo A. Pino
Keyword(s):  
Density Functional Theory ◽  
Water Molecule ◽  
Optical Spectroscopy ◽  
Density Functional ◽  
Functional Theory ◽  
Single Water Molecule

Single water molecule hydration stabilizes two quasi-isoenergetic complexes of cytosine⋯Ag+.

DFT study on the hydrolysis of metsulfuron-methyl: A sulfonylurea herbicide

2018 ◽  
Vol 17 (08) ◽  
pp. 1850050 ◽  
Author(s):  
Qiuhan Luo ◽  
Gang Li ◽  
Junping Xiao ◽  
Chunhui Yin ◽  
Yahui He ◽  
...  
Keyword(s):  
Free Energy ◽  
Water Molecule ◽  
Carbonyl Group ◽  
Energy Barrier ◽  
Density Functional ◽  
Free Energy Barrier ◽  
Functional Theory ◽  
Metsulfuron Methyl ◽  
Catalytic Role ◽  
Hydrolysis Of

Sulfonylureas are an important group of herbicides widely used for a range of weeds and grasses control particularly in cereals. However, some of them tend to persist for years in environments. Hydrolysis is the primary pathway for their degradation. To understand the hydrolysis behavior of sulfonylurea herbicides, the hydrolysis mechanism of metsulfuron-methyl, a typical sulfonylurea, was investigated using density functional theory (DFT) at the B3LYP/6-31[Formula: see text]G(d,p) level. The hydrolysis of metsulfuron-methyl resembles nucleophilic substitution by a water molecule attacking the carbonyl group from aryl side (pathway a) or from heterocycle side (pathway b). In the direct hydrolysis, the carbonyl group is directly attacked by one water molecule to form benzene sulfonamide or heterocyclic amine; the free energy barrier is about 52–58[Formula: see text]kcal[Formula: see text]mol[Formula: see text]. In the autocatalytic hydrolysis, with the second water molecule acting as a catalyst, the free energy barrier, which is about 43–45[Formula: see text]kcal[Formula: see text]mol[Formula: see text], is remarkably reduced by about 11[Formula: see text]kcal[Formula: see text]mol[Formula: see text]. It is obvious that water molecules play a significant catalytic role during the hydrolysis of sulfonylureas.

Crystal structure of tamsulosin hydrochloride, C20H29N2O5SCl

2021 ◽  
pp. 1-7
Author(s):  
Nilan V. Patel ◽  
Joseph T. Golab ◽  
James A. Kaduk ◽  
Amy M. Gindhart ◽  
Thomas N. Blanton
Keyword(s):  
Crystal Structure ◽  
Hydrogen Bond ◽  
Hydrogen Atom ◽  
Powder Diffraction ◽  
Density Functional ◽  
Carbon Chain ◽  
Strong Hydrogen Bond ◽  
Powder Diffraction File ◽  
Ether Oxygen ◽  
Sulfonamide Group

The crystal structure of tamsulosin hydrochloride has been solved and refined using synchrotron X-ray powder diffraction data and optimized using density functional techniques. Tamsulosin hydrochloride crystallizes in space group P21 (#4) with a = 7.62988(2), b = 9.27652(2), c = 31.84996(12) Å, β = 93.2221(2)°, V = 2250.734(7) Å3, and Z = 4. In the crystal structure, two arene rings are connected by a carbon chain oriented roughly parallel to the c-axis. The crystal structure is characterized by two slabs of tamsulosin hydrochloride molecules perpendicular to the c-axis. As expected, each of the hydrogens on the protonated nitrogen atoms makes a strong hydrogen bond to one of the chloride anions. The result is to link the cations and anions into columns along the b-axis. One hydrogen atom of each sulfonamide group also makes a hydrogen bond to a chloride anion. The other hydrogen atom of each sulfonamide group forms bifurcated hydrogen bonds to two ether oxygen atoms. The powder pattern is included in the Powder Diffraction File™ as entry 00-065-1415.

Sign in / Sign up

Export Citation Format

Share Document