scholarly journals Robust Hybrid Beamforming Scheme for Millimeter-Wave Massive-MIMO 5G Wireless Networks

Symmetry ◽  
2019 ◽  
Vol 11 (11) ◽  
pp. 1424 ◽  
Author(s):  
Saleem Latteef Mohammed ◽  
Mohammed H. Alsharif ◽  
Sadik Kamel Gharghan ◽  
Imran Khan ◽  
Mahmoud Albreem
Keyword(s):  
Wireless Networks ◽  
Millimeter Wave ◽  
Massive Mimo ◽  
Large Scale ◽  
Minimum Mean Square Error ◽  
Multiple Input Multiple Output ◽  
Low Complexity ◽  
Network Capacity ◽  
System Throughput ◽  
Hybrid Beamforming

Wireless networks employing millimeter-wave (mmWave) and Massive Multiple-Input Multiple-Output (MIMO) technologies are a key approach to boost network capacity, coverage, and quality of service (QoS) for future communications. They deploy symmetric antennas on a large scale in order to enhance the system throughput and data rate. However, increasing the number of antennas and Radio Frequency (RF) chains results in high computational complexity and more energy requirements. Therefore, to solve these problems, this paper proposes a low-complexity hybrid beamforming scheme for mmWave Massive-MIMO 5G wireless networks. The proposed algorithm is on the basis of alternating the minimum mean square error (Alt-MMSE) hybrid beamforming technique in which the orthogonal properties of the digital matrix were designed, and then the MSE of the transmitted and received signal was reduced. The phase of the analog matrix was obtained from the updated digital matrix. Simulation results showed that the proposed hybrid beamforming algorithm had better performance than existing state-of-the-art algorithms, and similar performance with the optimal digital precoding algorithm.

scholarly journals Low-complexity sparse-aware multiuser detection for large-scale MIMO systems

2021 ◽  
Vol 2021 (1) ◽  
Author(s):  
Rong Ran ◽  
Hayoung Oh
Keyword(s):  
Large Scale ◽  
Mimo Systems ◽  
Minimum Mean Square Error ◽  
Multiple Input Multiple Output ◽  
Low Complexity ◽  
Finite Alphabet ◽  
Multiuser Detectors ◽  
Input Multiple Output ◽  
Error Detector ◽  
Significant Performance

AbstractSparse-aware (SA) detectors have attracted a lot attention due to its significant performance and low-complexity, in particular for large-scale multiple-input multiple-output (MIMO) systems. Similar to the conventional multiuser detectors, the nonlinear or compressive sensing based SA detectors provide the better performance but are not appropriate for the overdetermined multiuser MIMO systems in sense of power and time consumption. The linear SA detector provides a more elegant tradeoff between performance and complexity compared to the nonlinear ones. However, the major limitation of the linear SA detector is that, as the zero-forcing or minimum mean square error detector, it was derived by relaxing the finite-alphabet constraints, and therefore its performance is still sub-optimal. In this paper, we propose a novel SA detector, named single-dimensional search-based SA (SDSB-SA) detector, for overdetermined uplink MIMO systems. The proposed SDSB-SA detector adheres to the finite-alphabet constraints so that it outperforms the conventional linear SA detector, in particular, in high SNR regime. Meanwhile, the proposed detector follows a single-dimensional search manner, so it has a very low computational complexity which is feasible for light-ware Internet of Thing devices for ultra-reliable low-latency communication. Numerical results show that the the proposed SDSB-SA detector provides a relatively better tradeoff between the performance and complexity compared with several existing detectors.

scholarly journals Hardware Implementation and Performance Analysis of Improved Sphere Decoder in Spatially Correlated Massive MIMO Channels

2021 ◽  
Author(s):  
Dimitris Vordonis ◽  
Vassilis Paliouras
Keyword(s):  
Massive Mimo ◽  
Large Scale ◽  
Hardware Implementation ◽  
Multiple Input Multiple Output ◽  
Low Complexity ◽  
Mimo Channels ◽  
Sphere Decoder ◽  
Trade Offs ◽  
Simulation Results ◽  
The Impact

Detection for high-dimensional multiple-input multiple-output (MIMO) and massive MIMO (MMIMO) systems is an active field of research in wireless communications. While most works consider spatially uncorrelated channels, practical MMIMO channels are correlated. This paper investigates the impact of correlation on Sphere Decoder (SD), for both single-user (SU) and multi-user (MU) scenarios. The complexity of SD is mainly determined by the initial radius (IR) method and the number of visited nodes during detection. This paper employs an efficient IR and proposes a new metric constraint in the tree searching algorithm, that significantly decrease the number of visited nodes and render SD feasible for large-scale systems. In addition, an introduced hardware implementation featured with a one-node-per-cycle architecture, minimizes the latency of the detection process. Trade-offs between bit error rate (BER) performance and computational complexity are presented. The trade-offs are achieved by either modifying the backtracking mechanism or limiting the number of radius updates. Simulation results prove that the proposed optimizations are effective for both correlated and uncorrelated channels, regardless of the level of noise. The decoding gain of SD compared to the low-complexity linear detectors (LD) is higher in the presence of correlation than in the uncorrelated case. However, as expected, spatial correlation adversely affects the performance and the complexity of SD. Simulation results reported here also confirm that correlation at the side equipped with more antennas is less detrimental. Hardware implementation aspects are examined for both a Virtex-7 FPGA device and a 28-nm ASIC technology.<br>

scholarly journals Hardware Implementation and Performance Analysis of Improved Sphere Decoder in spatially correlated Massive MIMO channels

2021 ◽  
Author(s):  
Dimitris Vordonis ◽  
Vassilis Paliouras
Keyword(s):  
Massive Mimo ◽  
Large Scale ◽  
Hardware Implementation ◽  
Multiple Input Multiple Output ◽  
Low Complexity ◽  
Mimo Channels ◽  
Sphere Decoder ◽  
Trade Offs ◽  
Simulation Results ◽  
The Impact

<div>Detection for high-dimensional multiple-input multiple-output (MIMO) and Massive MIMO (MMIMO) systems is an active field of research in wireless communications. While most works consider spatially uncorrelated channels, practical MMIMO channels are correlated. This paper investigates the impact of correlation on Sphere Decoder (SD), not only for Single-User (SU) but also for Multi-User (MU) scenarios. The complexity of SD is mainly determined by the Initial Radius (IR) method and the number of visited nodes during detection. This paper proposes both an efficient IR and a new metric constraint in the tree searching algorithm, that significantly decrease the number of visited nodes and render SD feasible for large-scale systems. In addition, a hardware implementation featured with a one-node-per-cycle architecture, minimizes the latency of the detection process. Trade-offs between bit error rate (BER) performance and computational complexity are presented, either modifying the backtracking mechanism or limiting the number of radius updates. Simulation results prove that the proposed optimizations are effective for both correlated and uncorrelated channels, regardless the level of noise. The decoding gain of SD compared to the low-complexity Linear Detectors (LD) is higher in the presence of correlation than in the uncorrelated case. However, as expected, spatial correlation adversely affects the performance and the complexity of SD. Simulation results reported here also confirm that correlation at the side equipped with more antennas is less detrimental. Hardware aspects are examined for both a Virtex-7 FPGA device and a 28-nm ASIC technology.</div>

scholarly journals A Robust Hybrid Iterative Linear Detector for Massive MIMO Uplink Systems

Symmetry ◽  
2020 ◽  
Vol 12 (2) ◽  
pp. 306 ◽  
Author(s):  
Mahmoud A. Albreem ◽  
Mohammed H. Alsharif ◽  
Sunghwan Kim
Keyword(s):  
Computational Complexity ◽  
Convergence Rate ◽  
Massive Mimo ◽  
High Performance ◽  
Large Scale ◽  
Multiple Input Multiple Output ◽  
Low Complexity ◽  
Detection Algorithm ◽  
Initial Vector ◽  
High Data

Fifth-generation (5G) communications system is commercially introduced by several mobile operators where sub-6 GHz bands are the backbone of the 5G networks. A large-scale multiple-input multiple-output (MIMO), or massive MIMO (mMIMO), technology has a major impact to secure high data rate, high spectral efficiency, and quality of service (QoS). It could also have a major role in the beyond-5G systems. A massive number of antennas seek advanced signal processing to detect and equalize the signal. However, optimal detectors, such as the maximum likelihood (ML) and maximum posterior (MAP), are not desirable in implementation due to extremely high complexity. Therefore, sub-optimum solutions have been introduced to obtain and guarantee enough balance between the performance and the computational complexity. In this paper, a robust and joint low complexity detection algorithm is proposed based on the Jacobi (JA) and Gauss–Seidel (GS) methods. In such iterative methods, the performance, complexity, and convergence rate are highly dependent on the initial vector. In this paper, initial solution is proposed by exploiting the benefits of a stair matrix to obtain a fast convergence rate, high performance, and low complexity. Numerical results show that proposed algorithm achieves high accuracy and relieve the computational complexity even when the BS-to-user-antenna ratio (BUAR) is small.

scholarly journals Hardware Implementation and Performance Analysis of Improved Sphere Decoder in spatially correlated Massive MIMO channels

2021 ◽  
Author(s):  
Dimitris Vordonis ◽  
Vassilis Paliouras
Keyword(s):  
Massive Mimo ◽  
Large Scale ◽  
Hardware Implementation ◽  
Multiple Input Multiple Output ◽  
Low Complexity ◽  
Mimo Channels ◽  
Sphere Decoder ◽  
Trade Offs ◽  
Simulation Results ◽  
The Impact

<div>Detection for high-dimensional multiple-input multiple-output (MIMO) and Massive MIMO (MMIMO) systems is an active field of research in wireless communications. While most works consider spatially uncorrelated channels, practical MMIMO channels are correlated. This paper investigates the impact of correlation on Sphere Decoder (SD), not only for Single-User (SU) but also for Multi-User (MU) scenarios. The complexity of SD is mainly determined by the Initial Radius (IR) method and the number of visited nodes during detection. This paper proposes both an efficient IR and a new metric constraint in the tree searching algorithm, that significantly decrease the number of visited nodes and render SD feasible for large-scale systems. In addition, a hardware implementation featured with a one-node-per-cycle architecture, minimizes the latency of the detection process. Trade-offs between bit error rate (BER) performance and computational complexity are presented, either modifying the backtracking mechanism or limiting the number of radius updates. Simulation results prove that the proposed optimizations are effective for both correlated and uncorrelated channels, regardless the level of noise. The decoding gain of SD compared to the low-complexity Linear Detectors (LD) is higher in the presence of correlation than in the uncorrelated case. However, as expected, spatial correlation adversely affects the performance and the complexity of SD. Simulation results reported here also confirm that correlation at the side equipped with more antennas is less detrimental. Hardware aspects are examined for both a Virtex-7 FPGA device and a 28-nm ASIC technology.</div>

scholarly journals Low Complexity Angular-Domain Detection for the Uplink of Multi-User mmWave Massive MIMO Systems

Electronics ◽  
2020 ◽  
Vol 9 (5) ◽  
pp. 795
Author(s):  
Xiaoxuan Xia ◽  
Wence Zhang ◽  
Yinkai Fu ◽  
Xu Bao ◽  
Jing Xia
Keyword(s):  
Energy Efficiency ◽  
Computational Complexity ◽  
Massive Mimo ◽  
Communication Systems ◽  
Mimo Systems ◽  
Minimum Mean Square Error ◽  
Multiple Input Multiple Output ◽  
Digital Processing ◽  
Low Complexity ◽  
Angular Domain

To compromise between the system performance and hardware cost, millimeter wave (mmWave) massive multiple-input multiple-output (MIMO) systems have been regarded as an enabling technology for the fifth generation of mobile communication systems (5G). This paper considers a low-complexity angular-domain compressing based detection (ACD) for uplink multi-user mmWave massive MIMO systems, which involves hybrid analog and digital processing. In analog processing, we perform angular-domain compression on the received signal by exploiting the sparsity of the mmWave channel to reduce the dimension of the signal space. In digital processing, the proposed ACD scheme works well with zero forcing (ZF)/maximum ratio combining (MRC)/minimum mean square error (MMSE) detection schemes. The performance analysis of the proposed ACD scheme is provided in terms of achievable rates, energy efficiency and computational complexity. Simulations are carried out and it shows that compared with existing works, the proposed ACD scheme not only reduces the computational complexity by more than 50 % , but also improves the system’s achievable rates and energy efficiency.

scholarly journals Hybrid Beamforming for Millimeter-Wave Heterogeneous Networks

Electronics ◽  
2019 ◽  
Vol 8 (2) ◽  
pp. 133 ◽  
Author(s):  
Mostafa Hefnawi
Keyword(s):  
Millimeter Wave ◽  
Heterogeneous Networks ◽  
Antenna Arrays ◽  
Large Scale ◽  
Network Capacity ◽  
Base Station ◽  
Antenna Element ◽  
Digital Beamforming ◽  
Hybrid Beamforming ◽  
Cell Base

Heterogeneous networks (HetNets) employing massive multiple-input multiple-output (MIMO) and millimeter-wave (mmWave) technologies have emerged as a promising solution to enhance the network capacity and coverage of next-generation 5G cellular networks. However, the use of traditional fully-digital MIMO beamforming methods, which require one radio frequency (RF) chain per antenna element, is not practical for large-scale antenna arrays, due to the high cost and high power consumption. To reduce the number of RF chains, hybrid analog and digital beamforming has been proposed as an alternative structure. In this paper, therefore, we consider a HetNet formed with one macro-cell base station (MBS) and multiple small-cell base stations (SBSs) equipped with large-scale antenna arrays that employ hybrid analog and digital beamforming. The analog beamforming weight vectors of the MBS and the SBSs correspond to the the best-fixed multi-beams obtained by eigendecomposition schemes. On the other hand, digital beamforming weights are optimized to maximize the receive signal-to-interference-plus-noise ratio (SINR) of the effective channels consisting of the cascade of the analog beamforming weights and the actual channel. The performance is evaluated in terms of the beampatterns and the ergodic channel capacity and shows that the proposed hybrid beamforming scheme achieves near-optimal performance with only four RF chains while requiring considerably less computational complexity.

scholarly journals Energy Efficient Linear and Non-Linear Precoders for Massive MIMO Systems

2020 ◽  
Vol 8 (8) ◽  
pp. 59-66
Author(s):  
Samson Hansen Sackey ◽  
Michael Kwame Ansong ◽  
Samuel Nartey Kofie ◽  
Abdul Karim Armahy
Keyword(s):  
Energy Efficiency ◽  
Massive Mimo ◽  
Large Scale ◽  
Mimo Systems ◽  
Minimum Mean Square Error ◽  
Multiple Input Multiple Output ◽  
Antenna System ◽  
Dirty Paper Coding ◽  
Multiple Input ◽  
Non Linear

The term Massive MIMO means, Massive multiple input multiple output also known as (large-scale antenna system, very large MIMO). Massive Multiple-Input-MultipleOutput (MIMO) is the major key technique for the future Fifth Generation (5G) of mobile wireless communication network due to its characteristics, elements and advantages. Massive MIMO will be comprised of five major elements; antennas, electronic components, network architectures, protocols and signal processing. We realize that precoding technique is a processing technique that utilizes Channel State Information Technique (CSIT) by operating on the signals before transmitting them. This technique varies base on the type of CSIT and performance criterion. Precoding technique is the last digital processing block at the transmitting side. In this paper, linear and non-linear Precoding technique was reviewed and we proposed two techniques under each that is Minimum Mean Square Error (MMSE), Block Diagonalization (BD), Tomlinson-Harashima (TH) and Dirty paper coding (DPC). Four Precoding techniques: MMSE, BD, DPC and TH were used in the studies to power consumption, energy efficiency and area throughput for single-cell and multi-cell scenarios. In comparing the proposed techniques, in terms of energy efficiency and area throughput, reuse factor (Reuse 4) performs better than other techniques when there is an imperfect CSI is used

Sign in / Sign up

Export Citation Format

Share Document