scholarly journals Magnetohydrodynamic and Nanoparticle Effects in Vertical Annular Subcooled Flow Boiling

Symmetry ◽  
2019 ◽  
Vol 11 (6) ◽  
pp. 810 ◽  
Author(s):  
Mohammad Abdollahzadeh Jamalabadi
Keyword(s):  
Liquid Water ◽  
Flow Boiling ◽  
Pure Water ◽  
Nucleate Boiling ◽  
Subcooled Flow Boiling ◽  
Conservation Of Energy ◽  
Heat Exchanger Design ◽  
Subcooled Flow ◽  
Annular Pipe ◽  
The Magnetic Field

The control of heated fluid is of interest in many fields of engineering, such as boiler and heat exchanger design. The broken symmetry of a thermo-physical system within a multi-sized media could be used to control its physical characteristics. In the current study, the effects of magnetohydrodynamic (MHD) forces and nanoparticles on boiling in a subcooled region inside an upright annular pipe have been investigated. The effect of magneto hydrodynamics on the base fluid (liquid water) was measured, and different nanoparticle concentrations were employed as the working fluids. The magnetic field perpendicular to fluid flow is used to control the liquid water and vapor water phase motion. The governing equation of motion and conservation of energy in both phases is solved with the aid of correlation for vaporization and condensation of nucleate boiling on the wall. The results of the mathematical simulation are in suitable agreement with the results of previous experiments. As associated with pure water, the results with dilute Nanofluids presented that the application of nanoparticles homogenized the temperature difference through the fluid and vapor phase. The results show that the MHD controller is a powerful method to decrease the amplitude of the vaporization and resulted in oscillations.

Heat Transfer Characteristics and Flow Pattern Visualization for Flow Boiling in a Vertical Narrow Microchannel

2018 ◽  
Author(s):  
Kan Zhou ◽  
Junye Li ◽  
Zhao-zan Feng ◽  
Wei Li ◽  
Hua Zhu ◽  
...  
Keyword(s):  
Heat Flux ◽  
Flow Pattern ◽  
Flow Boiling ◽  
Nucleate Boiling ◽  
Working Fluid ◽  
Inlet Temperature ◽  
Lower Mass ◽  
Subcooled Flow Boiling ◽  
Mass Fluxes ◽  
Subcooled Flow

For improving the functionality and signal speed of electronic devices, electronic components have been miniaturized and an increasing number of elements have been packaged in the device. As a result there has been a steady rise in the amount of heat necessitated to be dissipated from the electronic device. Recently microchannel heat sinks have been emerged as a kind of high performance cooling scheme to meet the heat dissipation requirement of electronics packaging, In the present study an experimental study of subcooled flow boiling in a high-aspect-ratio, one-sided heating rectangular microchannel with gap depth of 0.52 mm and width of 5 mm was conducted with deionized water as the working fluid. In the experimental operations, the mass flux was varied from 200 to 400 kg/m2s and imposed heat flux from 3 to 20 W/cm2 while the fluid inlet temperature was regulated constantly at 90 °C. The boiling curves, flow pattern and onset of nucleate boiling of subcooled flow boiling were investigated through instrumental measurements and a high speed camera. It was found that the slope of the boiling curves increased sharply once the superheat needed to initiate the onset of nucleate boiling was attained, and the slope was greater for lower mass fluxes, with lower superheat required for boiling incipience. As for the visualization images, for relatively lower mass fluxes the bubbles generated were larger and not easy to depart from the vertical upward placed narrow microchannel wall, giving elongated bubbly flow and reverse backflow. The thin film evaporation mechanism dominated the entire test section due to the elongated bubbles and transient local dryout as well as rewetting occurred. Meanwhile the initiative superheat and heat flux of onset of nucleate boiling were compared with existing correlations in the literature with good agreement.

Calcium Carbonate Scale Formation During Subcooled Flow Boiling

1997 ◽  
Vol 119 (4) ◽  
pp. 767-775 ◽  
Author(s):  
S. H. Najibi ◽  
H. Mu¨ller-Steinhagen ◽  
M. Jamialahmadi
Keyword(s):  
Heat Transfer ◽  
Experimental Data ◽  
Calcium Carbonate ◽  
Flow Boiling ◽  
Fluid Velocity ◽  
Nucleate Boiling ◽  
Operating Conditions ◽  
Initial Surface ◽  
Subcooled Flow Boiling ◽  
Subcooled Flow

Scale deposition on the heat transfer surfaces from water containing dissolved salts considerably reduces fuel economy and performance of the heat transfer equipment. In general, this problem is more serious during nucleate boiling due to the mechanisms of bubble formation and detachment. In this study, a large number of experiments were performed to determine the effect of fluid velocity, initial surface temperature, and bulk concentration on the rate of calcium carbonate deposition on heat transfer surfaces during subcooled flow boiling. A physically sound prediction model for the deposition process under these operating conditions has been developed which predicts the experimental data with good accuracy. Two previously published models are also discussed and used to predict the experimental data.

Subcooled Flow Boiling Inception and Heat Transfer of Water in a Circular Tube Under Pulsatile Flow

2018 ◽  
Author(s):  
Hongsheng Yuan ◽  
Sichao Tan ◽  
Kun Cheng ◽  
Xiaoli Wu ◽  
Chao Guo ◽  
...  
Keyword(s):  
Heat Transfer ◽  
Heat Flux ◽  
Steady Flow ◽  
Flow Rate ◽  
Flow Boiling ◽  
Nucleate Boiling ◽  
Nucleation Site ◽  
Subcooled Flow Boiling ◽  
Average Heat ◽  
Subcooled Flow

The flow rate can fluctuate in offshore nuclear power systems which are exposed to wind and waves, as well as in loops where flow instabilities occur, resulting in different thermal-hydraulic characteristics compared with that under steady flow. Among the thermal-hydraulic characteristics, onset of nucleate boiling (ONB) model determines whether the fluid is boiling, and boiling heat transfer is crucial to equipment performance and safety, both being key issues in subcooled flow boiling. Therefore, an experimental study was conducted to investigate how an imposed periodic flow oscillation affects the boiling inception and heat transfer of subcooled flow boiling of water in a vertical tube. The experiments were conducted under atmospheric pressure with the average flow rate ranging from 96kg/m2s to 287kg/m2s and heat flux ranging from 10kW/m2 to 197kW/m2. The relative pulsatile amplitude range is 0.1–0.3 and pulsatile period range is 10s-30s. Photographic images and thermal parameters such as temperatures and flow rate were recorded. The lack of nucleation site on the heated surface of the test section results in high wall superheat at ONB. The effects of pulsatile amplitude and period on superheat at boiling onset and average heat transfer were analyzed. The results show that the superheat at boiling inception is decreased when the average heat flux is lower than the heat flux at boiling inception of the corresponding steady flow, and the superheat at boiling onset is increased when the average heat flux is higher than the heat flux at boiling onset of the corresponding steady flow. The above effect of flow rate pulsation on superheat increases with increasing amplitude and decreasing period, and the mechanism can be explained by boiling nucleation theory. The lack of large active nucleation site also affects the boiling heat transfer. By comparing the contribution of nucleate boiling to heat transfer with the widely used Cooper’s pool boiling correlation, the subcooled flow boiling was found suppressed by convection. The average heat transfer of both the intermittent flow boiling and the single phase flow is influenced by flow oscillation.

Heat Transfer and Bubble Movement of Double- and Single-Side Heating Subcooled Flow Boiling in Narrow Channels

2005 ◽  
Author(s):  
Liang-Ming Pan ◽  
Chuan He ◽  
Ming-Dao Xin ◽  
Tien-Chien Jen ◽  
Qinghua Chen
Keyword(s):  
Heat Transfer ◽  
Flow Boiling ◽  
Narrow Channel ◽  
Nucleate Boiling ◽  
Bubble Behavior ◽  
Subcooled Flow Boiling ◽  
Narrow Channels ◽  
Subcooled Flow ◽  
Single Side ◽  
Micro Channels

Compared with conventional channels, narrow and micro channels have significant heat transfer enhancement characteristic. With smooth internal surface, such channels can efficiently avoid encrustation at the washing of the high-speed liquid. Moreover, heat transfer elements can be easily assembled. These types of channels have been adopted extensively in many engineering applications, e.g. microelectronic cooling, advanced nuclear reactor, cryogenic, aviation and space technology and thermal engineering. Geometrical size of flow passage-away affects heat exchange of flow boiling, with the result that the bubble in narrow channel acts very different from those in non-narrow channel. This paper experimentally compared the bubble behavior with different heating methods of narrow rectangular channels, and the bubble behavior of subcooled flow boiling of R-12 in the narrow channels both with double side and single heating. Experimental settings are: the heating length of test-section is 400 mm, the cross-section is 35 mm in width and 2mm in gap size, mass flux is 700∼1500 kg.m−2.s−1, the heat flux is 25∼70kW.m−2 and the pressure is 1.3∼2.0 MPa. Comparisons were made on Onset of Nucleate Boiling (ONB) point and bubble characters with various flow patterns. Results revealed that the characteristics of double and single side heating shown good agreement with proper modifications.

scholarly journals An experimental study on the subcooled flow boiling pressure drop of R141b in the system of two microchannels

2021 ◽  
Vol 2119 (1) ◽  
pp. 012053
Author(s):  
A. S. Shamirzaev
Keyword(s):  
Experimental Data ◽  
Experimental Study ◽  
Heat Flux ◽  
Pressure Drop ◽  
Flow Boiling ◽  
Nucleate Boiling ◽  
Copper Block ◽  
Subcooled Flow Boiling ◽  
Subcooled Flow ◽  
Boiling Incipience

Abstract An experimental study of the pressure drop under subcooled flow boiling of the refrigerant R141b in a system with two slotted microchannels was carried out. A copper block with two microchannels 2 mm wide, 0.4 mm deep, and 16 mm long was used as an experimental section for testing. The mass flow rate varied in the range from 1 to 4 g/s, the initial subcooling from 20°C to 50°C. Experimental data show a significant decrease in the pressure drop when the critical heat flux is reached. The experimental data are compared with the model known from the literature. Experimental data show that the occurrence of nucleate boiling incipience at subcooled boiling corresponds to a larger heat flux than that given by the recommended correlation.

Flow Morphology and Heat Transfer During Subcooled Flow Nucleate Boiling of HFE-7000 in Microchannels

2008 ◽  
Author(s):  
Chih-Jung Kuo ◽  
Yoav Peles
Keyword(s):  
Heat Transfer ◽  
Flow Boiling ◽  
Nucleate Boiling ◽  
Transfer Coefficients ◽  
Subcooled Flow Boiling ◽  
Heat Transfer Coefficients ◽  
Subcooled Flow ◽  
Hydraulic Conditions ◽  
Parallel Microchannels ◽  
Bubble Agitation

Flow boiling was experimentally studied in parallel microchannels using coolant HFE-7000. Subcooled nucleate boiling was achieved under various thermal-hydraulic conditions for mass velocities ranging from G = 164 kg/m2·s to G = 3025 kg/m2·s. Local surface temperatures were measured and flow visualizations were conducted to obtain flow morphologies, boiling curves, and heat transfer coefficients during boiling process. It was found that heat transfer was significantly enhanced during subcooled flow boiling by bubble agitation of the liquid.

Subcooled Flow Boiling in a Minichannel

2009 ◽  
Author(s):  
Akira Oshima ◽  
Koichi Suzuki ◽  
Chungpyo Hong ◽  
Masataka Mochizuki
Keyword(s):  
Heat Flux ◽  
High Speed ◽  
Flow Boiling ◽  
Heating Surface ◽  
Nucleate Boiling ◽  
High Heat Flux ◽  
Subcooled Flow Boiling ◽  
Maximum Heat ◽  
High Speed Video ◽  
Subcooled Flow

It has been considered that the dry-out is easy to occur in boiling heat transfer for a small channel, a mini or microchannel because the channel was easily filled with coalescing vapor bubbles. In the present study, the experiments of subcooled flow boiling of water were performed under atmospheric condition for a horizontal rectangular channel of which size is 1mm in height and 1mm in width with a flat heating surface of 10mm in length and 1mm in width placed on the bottom of the channel. The heating surface is a top of copper heating block and heated by ceramics heaters. In the high heat flux region of nucleate boiling, about 70 ∼ 80 percent of heating surface was covered with a large coalescing bubble and the boiling reached critical heat flux (CHF) by a high speed video observation. In the beginning of transition boiling, coalescing bubbles were collapsed to many fine bubbles and microbubble emission boiling was observed at higher liquid subcooling than 30K. The maximum heat flux obtained was 8MW/m2 (800W/cm2) at liquid subcooling of higher than 40K and the liquid velocity of 0.5m/s. However, the surface temperature was extremely higher than that of centimeter scale channel. The high speed video photographs indicated that microbubble emission boiling occurs in the deep transition boiling region.

Study on Subcooled Flow Boiling Heat Transfer Under Vibration Conditions

2009 ◽  
Author(s):  
Hiroyasu Ohtake ◽  
Naoki Uchida ◽  
Yasuo Koizumi
Keyword(s):  
Test Section ◽  
Liquid Velocity ◽  
Flow Boiling ◽  
Nucleate Boiling ◽  
Heat Fluxes ◽  
Vertical Position ◽  
Subcooled Flow Boiling ◽  
Velocity Amplitude ◽  
Vibration Condition ◽  
Subcooled Flow

Onset of nucleate boiling — ONB — and critical heat flux — CHF — on subcooled flow boiling under vibration condition, focusing on liquid velocity, amplitude and frequency of vibration, were investigated experimentally. Experiments were conducted using a copper thin-film and subcooled water in a range of the liquid velocity from 0.27 to 4.07 m/s at 0.10MPa. The liquid subcooling was 20K. The test section was set on a vibration table. The acceleration was 1.3 and 4.2 m/s2, respectively; the frequency was 2, 4 and 20 Hz, respectively. The test section was arranged for horizontal position facing upward and for vertical position, respectively: the vibration directions were horizontal and vertical to orientation of the heater. The present experimental results showed that critical heat fluxes under the vibration conditions of both vibration directions, i.e., horizontal and vertical vibrations to the heater, were higher than those for steady flow. The CHF under the vibration condition was increased with an increasing of acceleration of vibration. According to present observations, coalesced bubble on the heater was frequently released by vibration of the test heater. This behavior causes the CHF to become higher under the vibration condition.

Sign in / Sign up

Export Citation Format

Share Document