scholarly journals Effects of Cobalt Loading, Particle Size, and Calcination Condition on Co/CNT Catalyst Performance in Fischer–Tropsch Reactions

Symmetry ◽  
2018 ◽  
Vol 11 (1) ◽  
pp. 7 ◽  
Author(s):  
Omid Akbarzadeh ◽  
Noor Mohd Zabidi ◽  
Yasmin Abdul Wahab ◽  
Nor Hamizi ◽  
Zaira Chowdhury ◽  
...  
Keyword(s):  
Particle Size ◽  
Fixed Bed ◽  
Xrd Analysis ◽  
Bet Surface Area ◽  
Fischer Tropsch ◽  
Strong Electrostatic Adsorption ◽  
Transmission Electron ◽  
Co Conversion ◽  
Cobalt Loading ◽  
Temperature Programmed

The strong electrostatic adsorption (SEA) method was applied to the synthesis of a cobalt (Co) catalyst on a multi-walled carbon nanotube (CNT) support. In order to uptake more of the cobalt cluster with higher dispersion, the CNT was functionalized via acid and thermal treatment. The Co/CNT catalyst samples were characterized by a range of methods including the Brunauer–Emmet–Teller (BET) surface area analyzer, transmission electron microscopy (TEM), X-ray powder diffraction (XRD) analysis, atomic absorption spectroscopy (AAS), and H2-temperature programmed reduction (H2-TPR) analysis. The data from the TEM images revealed that the catalyst was highly dispersed over the external and internal walls of the CNT and that it demonstrated a narrow particle size of 6–8 nm. In addition, the data from the H2-TPR studies showed a lower reduction temperature (420 °C) for the pre-treated catalyst samples. Furthermore, a Fischer–Tropsch synthesis (FTS) reaction was chosen to evaluate the Co/CNT catalyst performance by using a fixed-bed microreactor at different parameters. Finally finding the optimum value of the cobalt loading percentage, particle size, and calcination conditions of Co/CNT catalyst resulted in a CO conversion and C5+ selectivity of 58.7% and 83.2%, respectively.

On efficiency of vanadium-oxide promoter in cobalt Fischer – Tropsch catalysts

2021 ◽  
Vol 1 (1-2) ◽  
pp. 15
Author(s):  
Elham Yaghoobpour ◽  
Yahya Zamani ◽  
Saeed Zarrinpashne ◽  
Akbar Zamaniyan
Keyword(s):  
Vanadium Oxide ◽  
Active Sites ◽  
Fixed Bed ◽  
Fixed Bed Reactor ◽  
Bet Surface Area ◽  
Incipient Wetness Impregnation ◽  
Impregnation Method ◽  
Fischer Tropsch ◽  
Co Conversion ◽  
Loading Amount

Promoters and their loading amount have crucial roles in cobalt Fischer – Tropsch catalysts. In this regard, the effects of vanadium oxide (V2O5) as a proposed promoter for Co catalyst supported on TiO2 have been investigated. Three catalysts with 0, 1, and 3 wt.% of V2O5 promoter loading are prepared by the incipient wetness impregnation method, and characterized by the BET surface area analyzer, XRD, H2-TPR, and TEM techniques. The fixed-bed reactor was employed for their evaluations. It was found that the catalyst containing 1 wt.% V2O5 has the best performance among the evaluated catalysts, demonstrating remarkable selectivity: 92 % C5+ and 5.7 % CH4, together with preserving the amount of CO conversion compared to the unpromoted catalyst. Furthermore, it is reported that the excess addition of V2O5 promoter (> 1 wt.%) in the introduced catalyst leads to the detrimental effect on the CO conversion and C5+ selectivity, mainly owing to diminished active sites by V2O5 loading.

scholarly journals Effect of Temperature, Syngas Space Velocity and Catalyst Stability of Co-Mn/CNT Bimetallic Catalyst on Fischer Tropsch Synthesis Performance

Catalysts ◽  
2021 ◽  
Vol 11 (7) ◽  
pp. 846
Author(s):  
Omid Akbarzadeh ◽  
Solhe F. Alshahateet ◽  
Noor Asmawati Mohd Zabidi ◽  
Seyedehmaryam Moosavi ◽  
Amir Kordijazi ◽  
...  
Keyword(s):  
Reaction Temperature ◽  
Bimetallic Catalyst ◽  
Fixed Bed ◽  
Absorption Spectrometry ◽  
Space Velocity ◽  
Catalyst Stability ◽  
Effect Of Temperature ◽  
Fischer Tropsch ◽  
Strong Electrostatic Adsorption ◽  
Co Conversion

The effect of reaction temperature, syngas space velocity, and catalyst stability on Fischer-Tropsch reaction was investigated using a fixed-bed microreactor. Cobalt and Manganese bimetallic catalysts on carbon nanotubes (CNT) support (Co-Mn/CNT) were synthesized via the strong electrostatic adsorption (SEA) method. For testing the performance of the catalyst, Co-Mn/CNT catalysts with four different manganese percentages (0, 5, 10, 15, and 20%) were synthesized. Synthesized catalysts were then analyzed by TEM, FESEM, atomic absorption spectrometry (AAS), and zeta potential sizer. In this study, the temperature was varied from 200 to 280 °C and syngas space velocity was varied from 0.5 to 4.5 L/g.h. Results showed an increasing reaction temperature from 200 °C to 280 °C with reaction pressure of 20 atm, the Space velocity of 2.5 L/h.g and H2/CO ratio of 2, lead to the rise of CO % conversion from 59.5% to 88.2% and an increase for C5+ selectivity from 83.2% to 85.8%. When compared to the other catalyst formulation, the catalyst sample with 95% cobalt and 5% manganese on CNT support (95Co5Mn/CNT) performed more stable for 48 h on stream.

Catalytic Performance of Supported Bimetallic Catalysts for Complete Oxidation of Toluene

2021 ◽  
Vol 21 (7) ◽  
pp. 4060-4066
Author(s):  
Sang-Chul Jung ◽  
Young-Kwon Park ◽  
Ho-Young Jung ◽  
Sang Chai Kim
Keyword(s):  
Catalytic Activity ◽  
Transition Metal ◽  
Bimetallic Catalysts ◽  
Xrd Analysis ◽  
Catalytic Performance ◽  
Bet Surface Area ◽  
Complete Oxidation ◽  
Transmission Electron ◽  
The Difference ◽  
Temperature Programmed

The complete oxidation of toluene (as a model volatile organic compound) was studied to determine the influence of adding a transition metal (Mn, Cr, Fe, Co, and Ni) to the 5 Cu/Al catalyst. The physcochemical properties of the catalysts were characterized by Brunauer–Emmett–Teller (BET) surface area analysis, X-ray diffraction (XRD) analysis, field emission transmission electron microscopy (FE/TEM), and hydrogen temperature programmed reduction (H2-TPR). The catalytic activity of the supported bimetallic catalysts followed the order: 5Cu-5Mn/Al > 5Cu-5Cr/Al > 5Cu-5Fe/Al > 5Cu-5Co/Al > 5Cu > 5Cu-5Ni/Al, based on the temperature for T90 of toluene conversion (T90). Two different reaction mechanisms (mixing and the synergistic effect) were operative in the supported bimetallic catalysts except for the 5Cu–5Mn/Al and 5Cu–5Ni/Al catalysts, on the basis of the reaction temperature. The difference between the electronegativity of copper and the added transition metal was associated with the catalytic activity.

Synthesis and Characterization of Bimetallic Fe/Co Nanocatalyst on CNTs for Fischer-Tropsch Reaction

2012 ◽  
Vol 16 ◽  
pp. 9-14 ◽  
Author(s):  
Sardar Ali ◽  
Noor Asmawati Mohd Zabidi ◽  
Duvvuri Subbarao
Keyword(s):  
Particle Size ◽  
Physicochemical Properties ◽  
Average Particle Size ◽  
Xrd Analysis ◽  
Synthesis And Characterization ◽  
Average Particle ◽  
Impregnation Method ◽  
Fischer Tropsch ◽  
Temperature Programmed

Cobalt and iron are common catalysts used in the Fischer-Tropsch (FT) reaction. This paper presents the synthesis and characterization of monometallic and bimetallic cobalt and iron nanoparticles supported on carbon nanotubes (CNTs). The CNTs-supported nanocatalysts were synthesized by a wet impregnation method at various ratios of Fe:Co. The physicochemical properties of the samples were analyzed by H2-temperature programmed reduction (TPR), CO and H2-chemisorption analyses, transmission electron microscopy (TEM) and X-ray diffraction (XRD) analysis. The effects of incorporation of Fe into Co on the physicochemical properties of Co/CNTs in terms of degree of reduction, CO and H2 chemisorptions and morphologies were investigated. TEM showed that metal nanoparticles were well dispersed on the external surface and inside the CNTs. For monometallic Co/CNTs and Fe/CNTs, the average metal particle size was 5±1 nm and 6±1 nm, respectively. For the bimetallic 70Co30Fe/CNTs nanocatalysts, the average particle size was found to be 4±1 nm. Metal particles attached to the outer walls were bigger than the ones inside the CNTs. H2-TPR analysis of Co/CNTs indicated two temperature regions at 330°C (low temperature) and 491°C (high temperature). The incorporation of iron into cobalt nanocatalysts of up to 30 % of the total metal loading enhanced the catalyst’s H2 and CO chemisorptions capacities and reducibility.

scholarly journals Effect of pH, Acid and Thermal Treatment Conditions on Co/CNT Catalyst Performance in Fischer–Tropsch Reaction

Symmetry ◽  
2019 ◽  
Vol 11 (1) ◽  
pp. 50 ◽  
Author(s):  
Omid Akbarzadeh ◽  
Noor Asmawati Mohd Zabidi ◽  
Nor Aliya Hamizi ◽  
Yasmin Abdul Wahab ◽  
Zulkifli Merican Aljunid Merican ◽  
...  
Keyword(s):  
Particle Size ◽  
Thermal Treatment ◽  
Fixed Bed ◽  
Particle Size Analysis ◽  
Treatment Temperature ◽  
Bet Surface Area ◽  
Narrow Particle Size Distribution ◽  
Size Analysis ◽  
Fischer Tropsch ◽  
Multiwalled Carbon

Multiwalled carbon nanotubes (CNT) supported cobalt oxide was prepared as a catalyst by strong electrostatic adsorption (SEA) method. The CNT support was initially acid- and thermal-treated in order to functionalize the support to uptake more Co clusters. The Co/CNT were characterized by a range of analytical methods including transmission electron microscopy (TEM), temperature programmed reduction with hydrogen (H2-TPR), X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FTIR), Raman spectroscopy, atomic absorption spectroscopy (AAS), Zeta sizer particle size analysis and Brunauer–Emmett–Teller (BET) surface area analysis. TEM images showed cobalt particles were highly dispersed and impregnated at both exterior and interior walls of the CNT support with a narrow particle size distribution of 6–8 nm. In addition, the performance of the synthesized Co/CNT catalyst was tested using Fischer–Tropsch synthesis (FTS) reaction which was carried out in a fixed-bed micro-reactor. H2-TPR profiles indicated the lower reduction temperature of 420 °C was required for the FTS reaction. The study revealed that cobalt is an effective metal for Co/CNT catalysts at pH 14 and at 900 °C calcination temperature. Furthermore, FTS reaction results showed that CO conversion and C5+ selectivity were recorded at 58.7% and 83.2% respectively, which were higher than those obtained using a Co/CNT catalyst which pre-treated at a lower thermal treatment temperature and pH.

Effects of Cu and K Promoters on the Catalytic Performance of Iron-Based Nanocatalyst for Fischer-Tropsch Synthesis

2013 ◽  
Vol 832 ◽  
pp. 15-20 ◽  
Author(s):  
Sara Faiz Hanna Tasfy ◽  
Noor Asmawati Mohd Zabidi ◽  
Duvvuri Subbarao
Keyword(s):  
Atmospheric Pressure ◽  
Fixed Bed ◽  
Space Velocity ◽  
Catalytic Performance ◽  
Reactant Ratio ◽  
Impregnation Method ◽  
Fischer Tropsch ◽  
Heavy Hydrocarbons ◽  
Co Conversion ◽  
Iron Based

Iron-based nanocatalyst was prepared via impregnation method on SiO2 support. The effects of promoters, namely, K and Cu, on the physical properties and catalytic performance in FTS have been investigated. The FTS performance of the synthesized nanocatalysts was examined in a fixed-bed microreactor at temperature of 523K, atmospheric pressure, 1.5 reactant ratio (H2/CO) and space velocity of 3L/g-cat.h. In FTS reaction, Cu promoter resulted in a lower CO conversion and C5+ hydrocarbons selectivity but higher selectivity to the lighter hydrocarbons (C1-C4) comparedto those obtained using the K promoter. Higher CO conversion (28.9%) and C5+ hydrocarbons selectivity (54.4%) were obtained using K as a promoter compared to that of Cu promoter. However, the K-promoted nanocatalyst resulted in a lower CO conversion but higher selectivity of the heavy hydrocarbons (C5+) compared to those obtained using the un-promoted nanocatalyst.

scholarly journals Effect of Cobalt Catalyst Confinement in Carbon Nanotubes Support on Fischer-Tropsch Synthesis Performance

Symmetry ◽  
2018 ◽  
Vol 10 (11) ◽  
pp. 572 ◽  
Author(s):  
Omid Akbarzadeh ◽  
Noor Mohd Zabidi ◽  
Yasmin Abdul Wahab ◽  
Nor Hamizi ◽  
Zaira Chowdhury ◽  
...  
Keyword(s):  
Carbon Nanotubes ◽  
Fixed Bed ◽  
Tropsch Synthesis ◽  
Fischer Tropsch ◽  
Fischer Tropsch Synthesis ◽  
Cobalt Oxide Nanoparticles ◽  
Co Conversion ◽  
Multi Walled Carbon Nanotubes ◽  
Pre Treatment ◽  
The Stability

Pre-treating the multi-walled carbon nanotubes (CNTs) support by refluxing in 35 vol% nitric acid followed by heating at the temperature of 600 to 900 °C resulted in the formation of defects on the CNTs. Increasing the temperature of the pre-treatment of the CNTs from 600 °C to 900 °C, enhanced the fraction of cobalt-oxide nanoparticles encapsulated in the channels of CNTs from 31% to 70%. The performance of Co/CNTs in Fischer-Tropsch synthesis (FTS) was evaluated in a fixed-bed micro-reactor at a temperature of 240 °C and a pressure of 2.0 MPa. The highest CO conversion obtained over Co/CNTs.A.900 was 59% and it dropped by ~3% after 130 h of time-on-stream. However, maximum CO conversion using Co/CNTs.A.600 catalysts was 28% and it decreased rapidly by about 54% after 130 h of time-on-stream. These findings show that the combined acid and thermal pre-treatment of CNTs support at 900 °C has improved the stability and activity of the Co/CNTs catalyst in FTS.

Effect of CO Conversion on the Product Distribution of a Co/Al2O3 Fischer–Tropsch Synthesis Catalyst Using a Fixed Bed Reactor

2012 ◽  
Vol 142 (11) ◽  
pp. 1382-1387 ◽  
Author(s):  
Dragomir B. Bukur ◽  
Zhendong Pan ◽  
Wenping Ma ◽  
Gary Jacobs ◽  
Burtron H. Davis
Keyword(s):  
Fixed Bed ◽  
Product Distribution ◽  
Tropsch Synthesis ◽  
Fixed Bed Reactor ◽  
Fischer Tropsch ◽  
Fischer Tropsch Synthesis ◽  
Co Conversion

scholarly journals Effect of CO2 partial pressure on dry reforming of ethanol for hydrogen production

2018 ◽  
Vol 1 (1) ◽  
pp. 6-10
Author(s):  
Fahim Fayaz ◽  
Ahmad Ziad Sulaiman ◽  
Sharanjit Singh ◽  
Sweeta Akbari
Keyword(s):  
Partial Pressure ◽  
Fixed Bed ◽  
Dry Reforming ◽  
Fixed Bed Reactor ◽  
Bet Surface Area ◽  
Impregnation Method ◽  
X Ray Diffraction ◽  
Co2 Partial Pressure ◽  
Temperature Programmed ◽  
Al2o3 Catalyst

The effect of CO2 partial pressure on ethanol dry reforming was evaluated over 5%Ce-10%Co/Al2O3 catalyst at = PCO2 = 20-50 kPa, PC2H5OH = 20 kPa, reaction temperature of 973 K under atmospheric pressure. The catalyst was prepared by using impregnation method and tested in a fixed-bed reactor. X-ray diffraction measurements studied the formation of Co3O4, spinel CoAl2O4 and CeO2, phases on surface of 5%Ce-10%Co/Al2O3 catalyst. CeO2, CoO and Co3O4 oxides were obtained during temperature–programmed calcination. Ce-promoted 10%Co/Al2O3 catalyst possessed high BET surface area of 137.35 m2 g-1. C2H5OH and CO2 conversions was improved with increasing CO2 partial pressure from 20-50 kPa whilst the optimal selectivity of H2 and CO was achieved at 50 kPa.

scholarly journals Structure and Property Investigation of Composite ZnO/SnO2Nanocrystalline Particles after High-Pressure Treatment

2008 ◽  
Vol 2008 ◽  
pp. 1-5 ◽  
Author(s):  
Sun Zhenya ◽  
Deng Yundi ◽  
Zhang Weiying
Keyword(s):  
Particle Size ◽  
High Pressure ◽  
Sol Gel ◽  
Photocatalytic Property ◽  
Xrd Analysis ◽  
Pressure Treatment ◽  
Visible Absorption ◽  
High Pressure Treatment ◽  
Structure And Property ◽  
Transmission Electron

Composite ZnO/SnO2nanocrystalline particles (ZnO/SnO2) were synthesized by sol-gel method and with treatment of high pressure at 6 GPa. The crystallinity and the particle size of the prepared samples were analyzed by X-ray diffraction (XRD) spectroscopy. The results indicated that all the samples had the good crystallinity, and the particle size of ZnO and ZnO/SnO2decreased after high-pressure treatment. The infrared (IR) spectra showed that the distance of crystal lattice was shortened after high-pressure treatment, and the size distribution became more uneven afterSnO2doping. With the high-resolution transmission electron microscope (HRTEM), we got some morphology information and evidence to support the IR and XRD analysis results. The results of ultraviolet-visible absorption (UV-Vis) spectra showed that ZnO/SnO2might improve the photocatalytic property of the samples after high-pressure treatment.

Sign in / Sign up

Export Citation Format

Share Document