scholarly journals Numerical Study of the Strength and Characteristics of Sandstone Samples with Combined Double Hole and Double Fissure Defects

2021 ◽  
Vol 13 (13) ◽  
pp. 7090
Author(s):  
Junbiao Ma ◽  
Ning Jiang ◽  
Xujun Wang ◽  
Xiaodong Jia ◽  
Dehao Yao
Keyword(s):  
Mechanical Properties ◽  
Stress Concentration ◽  
Crack Initiation ◽  
Compressive Stress ◽  
Uniaxial Compression ◽  
Failure Modes ◽  
Numerical Study ◽  
Simulation Software ◽  
Particle Flow Code ◽  
Peak Strain

To explore the failure mechanism of rock with holes and fissures, uniaxial compression tests of sandstone samples with combined double hole and double fissure defects were carried out using Particle Flow Code 2D (PFC2D) numerical simulation software. The failure behaviour and mechanical properties of the sandstone samples with combined double hole and double fissure defects at different angles were analysed, and the evolution results of the stress field and crack propagation were studied. The results show that with a decrease in fissure angle, the crack initiation stress, damage stress, elastic modulus and peak stress of the defective rock decrease, while the peak strain increases, and the brittleness of the rock is weakened. Rocks with combined double hole and double fissure defects at different angles lead to different failure modes, crack initiation positions and crack development directions. After uniaxial compression, both compressive stress and tensile stress concentration areas are produced in the defective rock, but the compressive stress concentration is of primary importance. The concentration area is mainly distributed around the holes and fissures and the defect connecting line, and the stress concentration area decreases with the decreasing fissure angle. This study can correctly predict the mechanical properties of rock with combined double hole and double fissure defects at different angles and provide a reference for actual rock engineering.

scholarly journals Numerical Simulation of Strength, Deformation, and Failure Characteristics of Rock with Fissure Hole Defect

2020 ◽  
Vol 2020 ◽  
pp. 1-15 ◽  
Author(s):  
Shaojie Chen ◽  
Zhiguo Xia ◽  
Fan Feng
Keyword(s):  
Elastic Modulus ◽  
Stress Concentration ◽  
Compressive Stress ◽  
Failure Modes ◽  
Elliptical Hole ◽  
Major Axis ◽  
Minor Axis ◽  
Peak Strain ◽  
Secondary Cracks ◽  
The Right

Using discrete element software, namely, particle flow code as two-dimensional program (PFC2D), two types of models were established: vertical fissure hole combination and horizontal fissure hole combination with ratios of major and minor axis of ellipse being 1, 1.2, 1.5, 2, and 3, which corresponded to a total of ten samples. The failure mode, mechanical behavior, and stress state before and after crack generation in elliptical hole crack combination models with different ratios of major and minor axis were analyzed. The crack development, stress field evolution, and acoustic emission characteristics of the vertical fissure model and horizontal fissure model were studied at the optimized ratio of major and minor axis of ellipse being 1.5. The results showed that elliptical hole fissure with different ratios of major and minor axis resulted in the decrease in the strength and elastic modulus of rock and increase in the peak strain of rock. The effect of the horizontal fissure model on the peak strength, peak strain, and elastic modulus of rock was found to be greater than that of the vertical fissure hole model. Ellipses with different ratios of major and minor axis in various models slightly influenced the rock failure modes, and their failure modes corresponded to tensile shear failure and tensile failure. Before crack formation, the tensile stress concentration areas of each model were, respectively, distributed at the upper and lower ends of the vertical fissure and the major axis of ellipse, and the compressive stress concentration areas were distributed at both ends of the major axis of ellipse and the fissure in the horizontal direction. After the model failed, the compressive stress concentration areas of the vertical fissure model and the horizontal fissure model transferred to the left upper part and the right upper part of the model along the left end of the hole and the right end of the fissure, respectively. When the ratio of major and minor axis of ellipse was 1.5, cracks in the vertical model and the horizontal model of fissure developed along the axial direction at the ends of cracks and holes, respectively, and then secondary cracks were generated at the ends of left and right sides. The maximum compressive stress in each stage of the vertical fissure model was greater than that of the horizontal fissure model, and when the model was damaged, its stress release was more.

scholarly journals Acoustic-Mechanical Responses of Intact and Flaw-Contained Rock Deformation under Uniaxial Compression: A Comparison

2019 ◽  
Vol 2019 ◽  
pp. 1-12 ◽  
Author(s):  
Gui-Lin Wang ◽  
Liang Zhang ◽  
Zhen Wang ◽  
Jian-Zhi Zhang ◽  
Fan Sun ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Uniaxial Compression ◽  
Fracture Behavior ◽  
Failure Modes ◽  
Jointed Rock ◽  
Peak Strain ◽  
Rock Masses ◽  
Stress Jump ◽  
Loading Process ◽  
Monitoring Technique

The study of the mechanical properties and cracking behaviors of jointed rock masses is important in rock engineering projects. In the present study, a series of uniaxial compression experiments were conducted on intact rock, and rock masses with single or double preexisting flaws, and then the strength, deformability, and fracture behavior of samples are investigated. Moreover, photographic monitoring technique and emission monitoring technique are introduced to explore the fracturing mode and the acoustic emission (AE) evolution characteristic of fractured rock during the whole loading process. The obtained results show that the preexisting flaw has a strong influence on the mechanical properties, fracture behavior, and AE characteristic of sandstone specimens. In detail, the stress-strain curves show that no significant stress jump occurs at prepeak and postpeak points for intact sandstone specimens; however, the flaw-contained sandstone specimens exhibit distinct stress jump during the entire loading process. Meanwhile, the strength parameters of the the rock specimen is obviously weakened by the preexisting fissures, and the uniaxial compression strength of rock specimens generally decreases with the increase in the number of preexisting fissure as well as the peak strain and the elastic modulus. The failure modes of intact and flaw-contained sandstone specimens exhibit the splitting failure and the mixed failure modes of shear and tension, respectively. Similarly, the maximum AE counts and AE energy both decrease with the increasing number of preexisting flaw. The present research can enhance the understanding of mechanical properties, cracking behaviors, and failure mechanism of jointed rock mass.

scholarly journals Experimental Study on the Mechanical Properties and Compression Size Effect of Recycled Aggregate Concrete

Materials ◽  
2021 ◽  
Vol 14 (9) ◽  
pp. 2323
Author(s):  
Yubing Du ◽  
Zhiqing Zhao ◽  
Qiang Xiao ◽  
Feiting Shi ◽  
Jianming Yang ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Size Effect ◽  
Compressive Stress ◽  
Failure Modes ◽  
Recycled Concrete ◽  
Recycled Aggregate Concrete ◽  
Recycled Aggregate ◽  
Aggregate Concrete ◽  
Substitution Ratio ◽  
The Impact

To explore the basic mechanical properties and size effects of recycled aggregate concrete (RAC) with different substitution ratios of coarse recycled concrete aggregates (CRCAs) to replace natural coarse aggregates (NCA), the failure modes and mechanical parameters of RAC under different loading conditions including compression, splitting tensile resistance and direct shear were compared and analyzed. The conclusions drawn are as follows: the failure mechanisms of concrete with different substitution ratios of CRCAs are similar; with the increase in substitution ratio, the peak compressive stress and peak tensile stress of RAC decrease gradually, the splitting limit displacement decreases, and the splitting tensile modulus slightly increases; with the increase in the concrete cube’s side length, the peak compressive stress of RAC declines gradually, but the integrity after compression is gradually improved; and the increase in the substitution ratio of the recycled aggregate reduces the impact of the size effect on the peak compressive stress of RAC. Furthermore, an influence equation of the coupling effect of the substitution ratio and size effect on the peak compressive stress of RAC was quantitatively established. The research results are of great significance for the engineering application of RAC and the strength selection of RAC structure design.

scholarly journals Acoustic Emission Characteristics and Joint Nonlinear Mechanical Response of Rock Masses under Uniaxial Compression

Energies ◽  
2021 ◽  
Vol 14 (1) ◽  
pp. 200
Author(s):  
Zhongliang Feng ◽  
Xin Chen ◽  
Yu Fu ◽  
Shaoshuai Qing ◽  
Tongguan Xie
Keyword(s):  
Acoustic Emission ◽  
Uniaxial Compression ◽  
Inclination Angle ◽  
Failure Modes ◽  
Strain Curve ◽  
Particle Flow Code ◽  
Rock Masses ◽  
Physical Experiments ◽  
Inclination Angles ◽  
Joint Inclination

The joint arrangement in rock masses is the critical factor controlling the stability of rock structures in underground geotechnical engineering. In this study, the influence of the joint inclination angle on the mechanical behavior of jointed rock masses under uniaxial compression was investigated. Physical model laboratory experiments were conducted on jointed specimens with a single pre-existing flaw inclined at 0°, 30°, 45°, 60°, and 90° and on intact specimens. The acoustic emission (AE) signals were monitored during the loading process, which revealed that there is a correlation between the AE characteristics and the failure modes of the jointed specimens with different inclination angles. In addition, particle flow code (PFC) modeling was carried out to reproduce the phenomena observed in the physical experiments. According to the numerical results, the AE phenomenon was basically the same as that observed in the physical experiments. The response of the pre-existing joint mainly involved three stages: (I) the closing of the joint; (II) the strength mobilization of the joint; and (III) the reopening of the joint. Moreover, the response of the pre-existing joint was closely related to the joint’s inclination. As the joint inclination angle increased, the strength mobilization stage of the joint gradually shifted from the pre-peak stage of the stress–strain curve to the post-peak stage. In addition, the instantaneous drop in the average joint system aperture (aave) in the specimens with medium and high inclination angles corresponded to a rapid increase in the form of the pulse of the AE activity during the strength mobilization stage.

scholarly journals Effects of Temperature and Water on Mechanical Properties, Energy Dissipation, and Microstructure of Argillaceous Sandstone under Static and Dynamic Loads

2020 ◽  
Vol 2020 ◽  
pp. 1-13
Author(s):  
Rongrong Zhang ◽  
Dongdong Ma ◽  
Qingqing Su ◽  
Kun Huang
Keyword(s):  
Mechanical Properties ◽  
Energy Dissipation ◽  
Failure Modes ◽  
Split Hopkinson Pressure Bar ◽  
Physical And Mechanical Properties ◽  
P Wave ◽  
Peak Strain ◽  
Hopkinson Pressure Bar ◽  
Stress Strain ◽  
Sandstone Specimen

RMT-150B rock mechanics and split Hopkinson pressure bar (SHPB) devices were adopted to investigate the physical and mechanical properties, energy dissipation, and failure modes of argillaceous sandstone after different high temperatures under air-dried and saturation states. In addition, SEM and EDS tests were conducted to investigate its microstructure characteristics. Results showed that both the P-wave velocity and density of argillaceous sandstone specimen decreased with the increase of high temperature, while its porosity increased. Compared with static stress-strain curves, there was no obvious compaction stage for dynamic stress-strain curves, and the decrease rate of dynamic curves after peak strain was obviously slow compared with static curves. Both the static and dynamic strengths of argillaceous sandstone specimens decreased with increasing temperature, and the critical temperature point for the strength of argillaceous sandstone was 400°C. At the same temperature, the specific energy absorption under air-dried state was generally smaller compared with that under saturated state. Both the strain rate and temperature showed significant effect on the failure mode. After 100∼1000°C heat treatment, the granular crystals of the clastic structure gradually became larger, and both the number and average size of the original pores decreased, resulting in the deterioration of mechanical properties of argillaceous sandstone specimen.

scholarly journals Investigation of the Effect of Bedding Layer Angle and Tunnel Number on the Stability of Tunnel under Uniaxial Compression Using PFC2D

2021 ◽  
Author(s):  
Vahab Sarfarazi ◽  
Kaveh Asgari ◽  
Mahdiyah Azizian
Keyword(s):  
Mechanical Properties ◽  
Uniaxial Compression ◽  
Dominant Mode ◽  
Two Dimensions ◽  
Particle Flow Code ◽  
Concrete Layer ◽  
Tunnel Diameter ◽  
Tunnel Number ◽  
Crack Growth Path ◽  
The Stability

In this paper the effect of bedding layer angle on the stability of tunnel under uniaxial compression have been investigated using particle flow code in two dimensions (PFC2D). For this purpose, numerical rectangle models with dimension of 100*100 mm have been prepared. These models consist of layers with different mechanical properties i.e., concrete layer and gypsum layer. The angle of these layers related to horizontal axis change from 0° to 90° with increment of 15°. These models are consisting of one, two and three tunnel. The diameter of tunnel change based on the tunnel number. The tunnel diameter was 6 m, when one tunnel exists in the model. The tunnel diameter was 3 m, when two tunnels exist in the model. The tunnel diameter was 2 m, when three tunnels exist in the model. These models were subjected to uniaxial compression. The results show that tensile cracks are dominant mode of fracture occurred in the models. The joint angle and tunnel number have important effect on the failure pattern and failure strength. Also, the mechanical properties of beddings control the crack growth path. The crack grows through the weak layers when bedding angle was equal to 45° and 60°, but it intersects the layer for any other bedding angels.

scholarly journals Predicting Performance of Aluminum - Glass Composite Facade Systems Based on Mechanical Properties of the Connection

2017 ◽  
Author(s):  
Maciej Cwyl Warszawska ◽  
Andrzej Garbacz ◽  
Rafał Michalczyk ◽  
Natalia Grzegorzewska
Keyword(s):  
Mechanical Properties ◽  
Finite Element ◽  
Stress Concentration ◽  
Mechanical Behavior ◽  
Numerical Study ◽  
Field Research ◽  
Glass Composite ◽  
Predicting Performance ◽  
Metal Framework ◽  
Aluminum Panels

In this paper, an extensive Finite-Element (FE) numerical study is carried out on a glass framing with point mechanical connectors. The models have been calibrated based on literature studies and field research. The simulations have been performed in order to assess the mechanical behavior of the examined glass-aluminum panels. In frame-support glass structures, such as curtain walls, where glass plates are mounted onto a metal framework, the composite behavior between glass and the supporting aluminum elements is usually a problem. It has been showed that an application of elastomer gaskets decreases the stress concentration at the interface between aluminum and glass while does not significantly change the working scheme of the profile. Based on the proposed models, the failure mechanism for wider set of geometrical configurations can be analyzed.

Sign in / Sign up

Export Citation Format

Share Document