scholarly journals Hysteretic Behavior of Reinforced Concrete Coupling Beams According to Volume Fraction of Steel Fiber

2020 ◽  
Vol 13 (1) ◽  
pp. 182
Author(s):  
Joo-Hong Chung ◽  
Dong-Hee Son ◽  
Su-Yong Kim ◽  
Baek-Il Bae ◽  
Chang-Sik Choi
Keyword(s):  
Reinforced Concrete ◽  
Steel Fiber ◽  
Volume Fraction ◽  
Fiber Reinforcement ◽  
Fiber Reinforced Concrete ◽  
Steel Fibers ◽  
Hysteretic Behavior ◽  
Steel Fiber Reinforced Concrete ◽  
Coupling Beams ◽  
Cyclic Loading Tests

The purpose of this study was to evaluate the structural performance of steel fiber reinforced concrete (SFRC) coupling beams. Reversed cyclic loading tests were performed with full-scale specimens. The main variable for the tests was the volume fraction ratio of the steel fibers. The results showed that the maximum strength was increased by about 11% with 1% of steel fibers incorporated, and about 24% when the ratio of mixed fibers was doubled to 2%. Because numerous microcracks occurred, decreased crack width due to the bridge effect was observed with the steel fiber reinforcement. Increased diagonal tension crack angles and energy dissipation also appeared as the volume fraction of steel fibers increased. The contribution of shear to the total deformation was decreased while the contribution of rocking was increased as steel fibers were added. Considering the results of these experiments, it can be concluded that steel fiber reinforcement affects the deformation of coupling beams in various ways, and should be considered when estimating the effective stiffness of such beams when SFRC is introduced.

Load and Deformation Properties of Steel Fiber Reinforced Concrete ShearWall

2011 ◽  
Vol 69 ◽  
pp. 23-27 ◽  
Author(s):  
Jun Zhao ◽  
Li Jun Wang ◽  
Dan Ying Gao
Keyword(s):  
Reinforced Concrete ◽  
Bearing Capacity ◽  
Steel Fiber ◽  
Volume Fraction ◽  
Load Capacity ◽  
Fiber Reinforced Concrete ◽  
Steel Fibers ◽  
Fiber Reinforced ◽  
Steel Fiber Reinforced Concrete ◽  
Deformation Properties

The numerical simulation by nonlinear finite element method(FEM) was adopted to analyze the behavior and the influences of the volume fraction of steel fibers and the strength of steel fiber reinforced concrete on the load capacity and the deformation performance of reinforced concrete shearwalls.The effect of steel fiber on the FEM was determined. The results show that with the increase of the volume fraction of steel fibers, the crack load, bearing capacity and ductility coefficient of steel fiber reinforced concrete shearwalls increase gradually. With the increase of the strength of steel fiber reinforced concrete, the bearing capacity and ductility coefficients of steel fiber reinforced concrete shearwalls decrease.

Experimental Study on Load Behavior of Steel Fiber Concrete Coupled Shear Wall

2013 ◽  
Vol 438-439 ◽  
pp. 682-685
Author(s):  
Jun Zhao ◽  
Meng Yao
Keyword(s):  
Reinforced Concrete ◽  
Bearing Capacity ◽  
Steel Fiber ◽  
Shear Walls ◽  
Shear Wall ◽  
Fiber Reinforced Concrete ◽  
Steel Fibers ◽  
Steel Fiber Reinforced Concrete ◽  
Coupling Beams ◽  
Steel Fiber Concrete

Through low cycle reverse tests of three steel fiber reinforced concrete coupled shear walls, the crack pattern, bearing capacity, stiffness and displacement are analyzed. Test results show that the bearing capacity, yielding stiffness and the anti-crack performance of the coupled shear walls are generally improved by adding steel fibers to reinforced concrete coupling beams, and the stiffness degeneration is also reduced to a certain degree. More cracks are induced by steel fibers bridged the main crack, which can make the shear wall consume more energy.

On axial compressive behavior of steel fiber reinforced concrete confined by FRP

2021 ◽  
pp. 136943322098165
Author(s):  
Hossein Saberi ◽  
Farzad Hatami ◽  
Alireza Rahai
Keyword(s):  
Reinforced Concrete ◽  
Experimental Test ◽  
Steel Fiber ◽  
Experimental Tests ◽  
Fiber Reinforced Concrete ◽  
Steel Fibers ◽  
Test Results ◽  
Fiber Reinforced ◽  
Steel Fiber Reinforced Concrete ◽  
Frp Confinement

In this study, the co-effects of steel fibers and FRP confinement on the concrete behavior under the axial compression load are investigated. Thus, the experimental tests were conducted on 18 steel fiber-reinforced concrete (SFRC) specimens confined by FRP. Moreover, 24 existing experimental test results of FRP-confined specimens tested under axial compression are gathered to compile a reliable database for developing a mathematical model. In the conducted experimental tests, the concrete strength was varied as 26 MPa and 32.5 MPa and the steel fiber content was varied as 0.0%, 1.5%, and 3%. The specimens were confined with one and two layers of glass fiber reinforced polymer (GFRP) sheet. The experimental test results show that simultaneously using the steel fibers and FRP confinement in concrete not only significantly increases the peak strength and ultimate strain of concrete but also solves the issue of sudden failure in the FRP-confined concrete. The simulations confirm that the results of the proposed model are in good agreement with those of experimental tests.

Experimental Research on Reinforcing Effect of Spiral Steel Fiber

2012 ◽  
Vol 174-177 ◽  
pp. 668-671
Author(s):  
He Ting Zhou
Keyword(s):  
Reinforced Concrete ◽  
Bond Strength ◽  
Experimental Research ◽  
Significant Role ◽  
Steel Fiber ◽  
Cement Mortar ◽  
Fiber Reinforced Concrete ◽  
Steel Fibers ◽  
Steel Fiber Reinforced Concrete ◽  
Reinforcing Effect

Steel fiber has a fine nature in reinforcing concrete. This essay aims to find out the influence of physical forms of steel fiber on its nature of reinforcement. By comparing two types of cement mortar reinforced by steel fibers, it is found that spiral steel fibers have a better bond strength with matrix than straight ones. Therefore, a conclusion could be drawn that physical forms of the steel fiber play a significant role in steel fiber reinforced concrete, and the experiment also serves a rewarding reference to the application of spiral steel fibers.

Experiment Study on the Frost Resistance of Steel Fiber Reinforced Concrete on the Microstructure

2011 ◽  
Vol 368-373 ◽  
pp. 357-360
Author(s):  
Lei Jiang ◽  
Di Tao Niu ◽  
Min Bai
Keyword(s):  
Reinforced Concrete ◽  
Frost Resistance ◽  
Steel Fiber ◽  
Volume Fraction ◽  
Fiber Reinforced Concrete ◽  
Fiber Reinforced ◽  
Nacl Solution ◽  
Steel Fiber Reinforced Concrete ◽  
Freeze Thaw ◽  
Damage Rate

Based on the fast freeze-thaw test in 3.5% NaCl solution, the frost resistance of steel fiber reinforced concrete (SFRC) was studied in this paper. On the basis of scanning electron microscope (SEM) and mercury intrusion method, the microstructure and pore structure of SFRC was analysed. The reinforced mechanism of SFRC under the cooperation of freeze-thaw and NaCl solution was discussed. The test results show that adding appropriate amount of steel fibers into concrete can reduce the pore porosity and improve the compactness of concrete. The effects of steel fiber with proper volume fraction can inhibit the peeling of the concrete and reduce its damage rate. The volume of steel fiber on the frost-resisting property of SFRC is obvious.

Study on Retrofitting and Strengthening of Reinforced Concrete Beams Using Fibrous Concrete

2021 ◽  
Vol 9 (8) ◽  
pp. 1676-1684
Author(s):  
Natalia Sharma
Keyword(s):  
Mechanical Properties ◽  
Reinforced Concrete ◽  
Steel Fiber ◽  
Concrete Beams ◽  
Fiber Reinforced Concrete ◽  
Steel Fibers ◽  
Reinforced Concrete Beams ◽  
Cement Matrix ◽  
Fiber Reinforced ◽  
Steel Fiber Reinforced Concrete

Abstract: Reinforced concrete structures are frequently in need of repair and strengthening as a result of numerous environmental causes, ageing, or material damage under intense stress conditions, as well as mistakes made during the construction process. RC structures are repaired using a variety of approaches nowadays. The usage of FRC is one of the retrofitting strategies. Steel fiber reinforced concrete (SFRC) was used in this investigation because it contains randomly dispersed short discrete steel fibers that operate as internal reinforcement to improve the cementitious composite's characteristics (concrete). The main rationale for integrating small discrete fibers into a cement matrix is to reduce the amount of cement used. The principal reason for incorporating short discrete fibers into a cement matrix is to reduce cracking in the elastic range, increase the tensile strength and deformation capacity and increase the toughness of the resultant composite. These properties of SFRC primarily depend upon length and volume of Steel fibers used in the concrete mixture. In India, the steel fiber reinforced concrete (SFRC) has seen limited applications in several structures due to the lack of awareness, design guidelines and construction specifications. Therefore, there is a need to develop information on the role of steel fibers in the concrete mixture. The experimental work reported in this study includes the mechanical properties of concrete at different volume fractions of steel fibers. These mechanical properties include compressive strength, split tensile strength and flexural strength and to study the effect of volume fraction and aspect ratio of steel fibers on these mechanical properties. However, main aim of the study was significance of reinforced concrete beams strengthened with fiber reinforced concrete layer and to investigate how these beams deflect under strain. The objective of the investigation was finding that applying FRC to strengthen beams enhanced structural performance in terms of ultimate load carrying capacity, fracture pattern deflection, and mode of failure or not.

scholarly journals Shrinkage and Mechanical Properties of Self-Compacting SFRC With Calcium-Sulfoaluminate Expansive Agent

Materials ◽  
2020 ◽  
Vol 13 (3) ◽  
pp. 588 ◽  
Author(s):  
Changyong Li ◽  
Pengran Shang ◽  
Fenglan Li ◽  
Meng Feng ◽  
Shunbo Zhao
Keyword(s):  
Mechanical Properties ◽  
Steel Fiber ◽  
Volume Fraction ◽  
Cementitious Materials ◽  
Fiber Reinforced Concrete ◽  
Steel Fibers ◽  
Steel Fiber Reinforced Concrete ◽  
Volume Stability ◽  
Calcium Sulfoaluminate ◽  
Expansive Agent

With the premise of ensuring workability on a fresh mixture, the volume stability of hardened self-compacting steel fiber reinforced concrete (SFRC) becomes an issue due to the content of cementitious materials increased with the volume fraction of steel fiber. By using the expansive agent to reduce the shrinkage deformation of self-compacting SFRC, the strength reduction of hardened self-compacting SFRC is another issue. To solve these issues, this paper performed an experimental investigation on the workability, shrinkage, and mechanical properties of self-compacting SFRC compared to the self-compacting concrete (SCC) with or without an expansive agent. The calcium-sulfoaluminate expansive agent with content optimized to be 10% mass of binders and the steel fiber with a varying volume fraction from 0.4% to 1.2% were selected as the main parameters. The mix proportion of self-compacting SFRC with expansive agent was designed by the direct absolute volume method, of which the steel fibers are considered to be the distributed coarse aggregates. Results showed that rational high filling and passing ability of fresh self-compacting SFRC was ensured by increasing the binder to coarse-aggregate ratio and the sand ratio in the mix proportions; the autogenous and drying shrinkages of hardened self-compacting SFRC reduced by 22.2% to 3.2% and by 18.5% to 7.3% compared to those of the SCC without expansive agent at a curing age of 180 d, although the expansion effect of expansive agent decreased with the increasing volume fraction of steel fiber; the mechanical properties, including the compressive strength, the splitting tensile strength, and the modulus of elasticity increased with the incorporation of an expansive agent and steel fibers, which met the design requirements.

scholarly journals Using Steel Fiber-Reinforced Concrete Precast Panels for Strengthening in Shear of Beams: An Experimental and Analytical Investigation

2019 ◽  
Vol 2019 ◽  
pp. 1-18 ◽  
Author(s):  
Pitcha Jongvivatsakul ◽  
Linh V. H. Bui ◽  
Theethawachr Koyekaewphring ◽  
Atichon Kunawisarut ◽  
Narawit Hemstapat ◽  
...  
Keyword(s):  
Reinforced Concrete ◽  
Steel Fiber ◽  
Volume Fraction ◽  
Fiber Reinforced Concrete ◽  
Experimental Program ◽  
Rc Beams ◽  
Fiber Reinforced ◽  
Steel Fiber Reinforced Concrete ◽  
Fiber Volume ◽  
Simple Formulation

In this paper, the performances of reinforced concrete (RC) beams strengthened in shear with steel fiber-reinforced concrete (SFRC) panels are investigated through experiment, analytical computation, and numerical analysis. An experimental program of RC beams strengthened by using SFRC panels, which were attached to both sides of the beams, is carried out to investigate the effects of fiber volume fraction, connection type, and number and diameter of bolts on the structural responses of the retrofitted beams. The current shear resisting model is also employed to discuss the test data considering shear contribution of SFRC panels. The experimental results indicate that the shear effectiveness of the beams strengthened by using SFRC panels is significantly improved. A three-dimensional (3D) nonlinear finite element (FE) analysis adopting ABAQUS is also conducted to simulate the beams strengthened in shear with SFRC panels. The investigation reveals the good agreement between the experimental and analytical results in terms of the mechanical behaviors. To complement the analytical study, a parametric study is performed to further evaluate the influences of panel thickness, compressive strength of SFRC, and bolt pattern on the performances of the beams. Based on the numerical and experimental analysis, a shear resisting model incorporating the simple formulation of average tensile strength perpendicular to the diagonal crack of the strengthened SFRC panels is proposed with the acceptable accuracy for predicting the shear contribution of the SFRC system under various effects.

Bending Toughness of Zinc Phosphate Steel Fiber Reinforced Concrete before and after Corrosion

2010 ◽  
Vol 168-170 ◽  
pp. 1762-1766
Author(s):  
Min Sun ◽  
Di Jiang Wen ◽  
Peng Xie
Keyword(s):  
Reinforced Concrete ◽  
Zinc Phosphate ◽  
Steel Fiber ◽  
Fiber Reinforced Concrete ◽  
Steel Fibers ◽  
Fiber Reinforced ◽  
Steel Fiber Reinforced Concrete ◽  
Before And After ◽  
Interface Bond Strength ◽  
Interface Bond

The interface bond between steel fibers and concrete matrix is the key of carrying capacity of steel fiber reinforced concrete(SFRC). In marine tidal fluctuation zone and splashed area, steel fibers will be rusty, and the bending toughness of SFRC was weakened. In this study, we tried to improve corrosion resistance of steel fiber and the interface bond strength by depositing zinc phosphate coating on steel fiber. These zinc phosphate steel fiber reinforced concrete(ZSFRC) have higher anti-corrosion ability. After corrosion they still have higher bending toughness than common SFRC.

Sign in / Sign up

Export Citation Format

Share Document