scholarly journals Is the Time-Domain Reflectometry (TDR) Technique Suitable for Moisture Content Measurement in Low-Porosity Building Materials?

2020 ◽  
Vol 12 (19) ◽  
pp. 7855 ◽  
Author(s):  
Teresa Stingl Freitas ◽  
Ana Sofia Guimarães ◽  
Staf Roels ◽  
Vasco Peixoto de Freitas ◽  
Andrea Cataldo
Keyword(s):  
Soil Moisture ◽  
Moisture Content ◽  
Time Domain ◽  
Building Materials ◽  
Construction Materials ◽  
Gravimetric Method ◽  
Time Domain Reflectometry ◽  
Advantages And Disadvantages ◽  
The Time Domain ◽  
Low Porosity

Measuring moisture content in building materials is essential both for professional practice and for research. However, this is a very complex task, especially when long-term minor destructive measurements are desired. The time-domain reflectometry (TDR) technique is commonly used for soil moisture measurements, but its application in construction materials is considered a relatively new method, particularly for low-porosity building materials. The major obstacles to its current use in construction materials are (1) the difficulty of ensuring good contact between the TDR probe and the material, and (2) the lack of appropriate conversion functions between the measured relative permittivity and the moisture content of building materials. This paper intends to contribute to overcoming these difficulties by explaining in detail all the required steps to monitor moisture content in real-scale limestone walls. For that, a device is presented to guarantee the correct installation of the TDR probes on the walls, and a calibration procedure through the gravimetric method is proposed to avoid the use of an unsuitable calibration function developed for soil moisture measurements. In addition, the importance of the individual probe calibration is discussed, as well as TDR advantages and disadvantages for construction materials. The results obtained so far reveal that the TDR technique is suitable to detect moisture content variations in limestone, which is a low-porosity building material.

scholarly journals Time Domain Reflectometry (TDR) technique – A solution to monitor moisture content in construction materials

2020 ◽  
Vol 172 ◽  
pp. 17001
Author(s):  
Teresa Stingl Freitas ◽  
Ana Sofia Guimarães ◽  
Staf Roels ◽  
Vasco Peixoto de Freitas ◽  
Andrea Cataldo
Keyword(s):  
Moisture Content ◽  
Time Domain ◽  
Building Materials ◽  
Correct Diagnosis ◽  
Construction Materials ◽  
Gravimetric Method ◽  
Reference Method ◽  
Time Domain Reflectometry ◽  
Relative Dielectric Permittivity ◽  
Porous Building Materials

Measuring moisture content in building materials is crucial for the correct diagnosis of buildings’ pathologies and for the efficiency evaluation of the treatment solution applied. There are several different techniques available to measure the moisture content in construction materials. However, perform long-term minor-destructive measurements is still a great challenge. The TDR – Time Domain Reflectometry – technique is commonly used for moisture content measurements in soils, but is considered a relatively new method with regard to its application in construction materials. In the present state of research, the current use of the TDR technique for monitoring moisture content in all types of consolidated porous building materials is not possible yet. Indeed, the empirical conversion functions proposed for soils are mostly not suitable for building materials. Furthermore, to successfully use the TDR technique, a good contact between the TDR probe and the material under study is required, which may be difficult to achieve in hard materials. In this paper, the TDR technique was implemented in two limestone walls constructed in the lab to test experimentally the efficiency of a wall-base ventilation channel to speed up drying after a flood. Each wall was equipped with four two-rod TDR probes for continuous monitoring the moisture content in both situations: with and without the ventilation channel. All the equipment used, procedures followed during the drilling until the probes’ final installation, as well as the individual calibration required for each probe are explained in detail. Instead of using unsuitable functions proposed for soils, the evaluation of the moisture content from the apparent relative dielectric permittivity measured was established using as reference method the gravimetric method. The results obtained suggest that the TDR technique is suitable for moisture content monitoring in consolidated porous building materials.

scholarly journals Capillary Uptake Monitoring in Lime-Hemp-Perlite Composite Using the Time Domain Reflectometry Sensing Technique for Moisture Detection in Building Composites

Materials ◽  
2020 ◽  
Vol 13 (7) ◽  
pp. 1677 ◽  
Author(s):  
Przemysław Brzyski ◽  
Zbigniew Suchorab
Keyword(s):  
Thermal Conductivity ◽  
Apparent Density ◽  
Time Domain ◽  
Building Materials ◽  
Gravimetric Method ◽  
Total Porosity ◽  
Time Domain Reflectometry ◽  
Partial Replacement ◽  
Wall Material ◽  
Capillary Uptake

The use of waste plants in the production of building materials is consistent with the principles of sustainable development. One of the ideas involves using hemp shives as an aggregate for the production of a composite used as a filling of the timber frame construction of the walls. The most important disadvantage of using the building materials based on organic components is their susceptibility to the water influence. The wall material is exposed to rising groundwater. The research part of the paper presented the preparation method and the investigation of the hemp-perlite-lime composites. Flexural and compressive strength, apparent density, total porosity, thermal conductivity, and mass absorptivity were examined. The main research part pertained to the analysis of capillary uptake occurrence in the composites, being the important phenomenon present in the external walls. The study on this phenomenon was carried out using the technique of indirect moisture evaluation—Time Domain Reflectometry (TDR). The indirect readouts were additionally verified with the traditional evaluation using the gravimetric method based on the PN-EN 1925 standard. The study proved that the tested composites were characterized by low apparent density, thermal conductivity, strength parameters, high total porosity, and mass absorptivity. The partial replacement of hemp shives by expanded perlite had a beneficial effect on the tested properties of composites.

Comparison of Standing Wave Ratio, Time Domain Reflectometry and Gravimetric Method for Soil Moisture Measurements

2011 ◽  
Vol 9 (3) ◽  
pp. 1140-1143 ◽  
Author(s):  
Lei Feng ◽  
Yiming Wang ◽  
Weizhong Yang ◽  
Qinglan Shi
Keyword(s):  
Soil Moisture ◽  
Standing Wave ◽  
Time Domain ◽  
Gravimetric Method ◽  
Time Domain Reflectometry

scholarly journals A Noninvasive TDR Sensor to Measure the Moisture Content of Rigid Porous Materials

Sensors ◽  
2018 ◽  
Vol 18 (11) ◽  
pp. 3935 ◽  
Author(s):  
Zbigniew Suchorab ◽  
Marcin Widomski ◽  
Grzegorz Łagód ◽  
Danuta Barnat-Hunek ◽  
Dariusz Majerek
Keyword(s):  
Moisture Content ◽  
Porous Materials ◽  
Building Materials ◽  
Capillary Rise ◽  
Capacitive Sensor ◽  
Time Domain Reflectometry ◽  
Capillary Uptake ◽  
Individual Calibration ◽  
Sample Application ◽  
The Time Domain

The article presents the potential application of the time domain reflectometry (TDR) technique to measure moisture transport in unsaturated porous materials. The research of the capillary uptake phenomenon in a sample of autoclaved aerated concrete (AAC) was conducted using a TDR sensor with the modified construction for non-invasive testing. In the paper the basic principles of the TDR method as a technique applied in metrology, and its potential for measurement of moisture in porous materials, including soils and porous building materials are presented. The second part of the article presents the experiment of capillary rise process in the AAC sample. Application of the custom sensor required its individual calibration, thus a unique model of regression between the readouts of apparent permittivity of the tested material and its moisture was developed. During the experiment moisture content was monitored in the sample exposed to water influence. Monitoring was conducted using the modified TDR sensor. The process was additionally measured using the standard frequency domain (FD) capacitive sensor in order to compare the readouts with traditional techniques of moisture detection. The uncertainty for testing AAC moisture, was expressed as RMSE (0.013 cm3/cm3) and expanded uncertainty (0.01–0.02 cm3/cm3 depending on moisture) was established along with calibration of the applied sensor. The obtained values are comparable to, or even better than, the features of the traditional invasive sensors utilizing universal calibration models. Both, the TDR and capacitive (FD) sensor enabled monitoring of capillary uptake phenomenon progress. It was noticed that at the end of the experiment the TDR readouts were 4.4% underestimated and the FD readouts were overestimated for 12.6% comparing to the reference gravimetric evaluation.

Application of Time-domain Reflectometry Method for Measuring Moisture Content in Porous Building Materials

2007 ◽  
Vol 2 (3) ◽  
pp. 188-200 ◽  
Author(s):  
Zbysek Pavlik . ◽  
Milena Pavlikova . ◽  
Lukas Fiala . ◽  
Robert Cerny . ◽  
Henryk Sobczuk . ◽  
...  
Keyword(s):  
Moisture Content ◽  
Time Domain ◽  
Building Materials ◽  
Time Domain Reflectometry ◽  
Porous Building Materials

Determining Moisture Content of Soil Layers with Time Domain Reflectometry and Micromechanics

2008 ◽  
Vol 2053 (1) ◽  
pp. 30-38 ◽  
Author(s):  
Sang Ick Lee ◽  
Dan G. Zollinger ◽  
Robert L. Lytton
Keyword(s):  
Dielectric Constant ◽  
Soil Moisture ◽  
Moisture Content ◽  
Water Content ◽  
Time Domain ◽  
Soil Moisture Content ◽  
Time Domain Reflectometry ◽  
Volumetric Water Content ◽  
Dry Density

Although the moisture condition of pavement sublayers can significantly affect pavement performance, accurate interpretation of in situ soil moisture measurements has been difficult to achieve because of the limitations of existing methods. Time domain reflectometry (TDR), originally developed to detect breaks or shorts in electrical conductors, has been used for measuring parameters related to the in situ soil moisture content. However, the apparent length method currently used to determine dielectric constant ignores other electrical properties of the conducting medium that may affect the interpretation of TDR trace to determine soil moisture. Furthermore, the existing methods for computing volumetric water content ignore the variations of dry density and determine the model parameters with assumption or regression analysis. These deficiencies can, in many cases, create a significant systematic error in the final determination of volumetric water content. To minimize these errors and improve the accuracy of moisture content estimate, a new three-step approach was proposed. The approach uses the transmission line equation to calculate the dielectric constant, conductivity, and reflectivity of a soil mixture. A micromechanics and self-consistent scheme was used to determine the volumetric moisture content and dry density on the basis of calibrated values of the solid and water dielectric constants. The system identification method was used iteratively to solve for dielectric parameters, soil moisture content, and dry density values. The validation of the new approach with ground-truth data indicated that the calculated errors were significantly less than those of existing method.

Sign in / Sign up

Export Citation Format

Share Document