scholarly journals Research on a Systematical Design Method for Nearly Zero-Energy Buildings

2019 ◽  
Vol 11 (24) ◽  
pp. 7032 ◽  
Author(s):  
Ji Li ◽  
Wei Xu ◽  
Ping Cui ◽  
Biao Qiao ◽  
Siyang Wu ◽  
...  

As a result of the impact of energy consumption, research on ultra-low energy, nearly zero-energy, and zero energy buildings has been conducted in China. However, the design of the nearly zero-energy building is flexible; the traditional architectural design method is not fully applicable to nearly zero-energy buildings. The paper proposed a performance-based design method based on overall energy consumption and progress for the nearly zero-energy building. The design process of the relevant cases was also analyzed. The factors of cold and heat sources, environment, and renewable energy were combined to make a comprehensive analysis to get the optimal scheme of the nearly zero-energy building in the case. In general, the performance-based design method has a certain guiding significance for the design of nearly zero-energy buildings and certainly promotes the expansion of the nearly zero-energy building industry in China.

Energies ◽  
2018 ◽  
Vol 11 (12) ◽  
pp. 3252 ◽  
Author(s):  
Xiaolong Xu ◽  
Guohui Feng ◽  
Dandan Chi ◽  
Ming Liu ◽  
Baoyue Dou

Optimizing key parameters with energy consumption as the control target can minimize the heating and cooling needs of buildings. In this paper we focus on the optimization of performance parameters design and the prediction of energy consumption for nearly Zero Energy Buildings (nZEB). The optimal combination of various performance parameters and the Energy Saving Ratio (ESR)are studied by using a large volume of simulation data. Artificial neural networks (ANNs) are applied for the prediction of annual electrical energy consumption in a nearly Zero Energy Building designs located in Shenyang (China). The data of the energy demand for our test is obtained by using building simulation techniques. The results demonstrate that the heating energy demand for our test nearly Zero Energy Building is 17.42 KW·h/(m2·a). The Energy Saving Ratio of window-to-wall ratios optimization is the most obvious, followed by thermal performance parameters of the window, and finally the insulation thickness. The maximum relative error of building energy consumption prediction is 6.46% when using the artificial neural network model to predict energy consumption. The establishment of this prediction method enables architects to easily and accurately obtain the energy consumption of buildings during the design phase.


2014 ◽  
Vol 587-589 ◽  
pp. 224-227
Author(s):  
Zhi Jun Zhang

A zero-energy building, also known as a zero net energy (ZNE) building, net-zero energy building (NZEB), or net zero building, is a building with zero net energy consumption and zero carbon emissions annually. Buildings that produce a surplus of energy over the year may be called “energy-plus buildings” and buildings that consume slightly more energy than they produce are called “near-zero energy buildings” or “ultra-low energy houses”. Traditional buildings consume 40% of the total fossil fuel energy in the US and European Union and are significant contributors of greenhouse gases. The zero net energy consumption principle is viewed as a means to reduce carbon emissions and reduce dependence on fossil fuels and although zero energy buildings remain uncommon even in developed countries, they are gaining importance and popularity.


2013 ◽  
Vol 649 ◽  
pp. 7-10 ◽  
Author(s):  
Mária Budiaková

The paper is oriented on the design of energy concepts of zero energy buildings. In the first phase of concept is important the good architectural design in terms of energy. In the residential building for four flats I calculated the annual energy consumption by computer simulation in the current condition and in the proposed reconstruction. I demonstrate that the unbalanced architectural design of flats in a residential building causes also after reconstruction a significant difference in energy consumption. This means that when developing energy concept of zero energy building the first essential step is energy efficient architectural design, taking into an account the energy aspects. The next step is to the use of technological aspects: passive and active use of solar gains, effective ventilation systems with heat recovery and new generation of heat pumps. For the formation of zero energy buildings is essential application of described progressive trends in the development of energy concepts.


2020 ◽  
Vol 2020 ◽  
pp. 1-17 ◽  
Author(s):  
Mohsen Mahdavi Adeli ◽  
Said Farahat ◽  
Faramarz Sarhaddi

Residential and commercial buildings consume approximately 60% of the world’s electricity. It is almost impossible to provide a general definition of thermal comfort, because the feeling of thermal comfort is affected by varying preferences and specific traits of the population living in different climate zones. Considering that no studies have been conducted on thermal satisfaction of net-zero energy buildings prior to this date, one of the objectives of the present study is to draw a comparison between the thermal parameters for evaluation of thermal comfort of a net-zero energy building occupants. In so doing, the given building for this study is first optimized for the target parameters of thermal comfort and energy consumption, and, hence, a net-zero energy building is formed. Subsequent to obtaining the acceptable thermal comfort range, the computational analyses required to determine the temperature for thermal comfort are carried out using the Computational Fluid Dynamics (CFD) model. The findings of this study demonstrate that to reach net-zero energy buildings, solar energy alone is not able to supply the energy consumption of buildings and other types of energy should also be used. Furthermore, it is observed that optimum thermal comfort is achieved in moderate seasons.


2018 ◽  
Vol 8 (1) ◽  
pp. 211-221
Author(s):  
Negar Aminoroayaei ◽  
Bahram Shahedi

In the current century, a suitable strategy is concerned for optimal consumption of energy, due to limited natural resources and fossil fuels for moving towards sustainable development and environmental protection. Given the rising cost of energy, environmental pollution and the end of fossil fuels, zero-energy buildings became a popular option in today's world. The purpose of this study is to investigate the factors affecting the design of zero-energy buildings, in order to reduce energy consumption and increase productivity, including plan form, climatic characteristics, materials, coverage etc. The present study collects the features of zero-energy building in Isfahan, which is based on the Emberger Climate View in the arid climate, by examining the books and related writings, field observations and using a descriptive method, in the form of qualitative studies. The results of the research showed that some actions are needed to save energy and, in general, less consumption of renewable energy by considering the climate and the use of natural conditions.


Data in Brief ◽  
2018 ◽  
Vol 21 ◽  
pp. 2470-2474 ◽  
Author(s):  
Delia D'Agostino ◽  
Livio Mazzarella

Sign in / Sign up

Export Citation Format

Share Document