scholarly journals Laboratory Evaluation on the Performance of Porous Asphalt Mixture with Steel Slag for Seasonal Frozen Regions

2019 ◽  
Vol 11 (24) ◽  
pp. 6924 ◽  
Author(s):  
Hanbing Liu ◽  
Bing Zhu ◽  
Haibin Wei ◽  
Chao Chai ◽  
Yu Chen
Keyword(s):  
Low Temperature ◽  
Coarse Aggregate ◽  
Steel Slag ◽  
Laboratory Evaluation ◽  
Cracking Resistance ◽  
Complete Replacement ◽  
Porous Asphalt ◽  
Natural Aggregate ◽  
Low Temperature Cracking ◽  
Four Levels

Porous asphalt mixtures with steel slag (PAM-SS), as an eco-friendly and low-cost pavement material, are conducive to addressing the issue of urban floods and natural resource shortages. The primary objective of this paper was to explore the feasibility of the application of PAM-SS for seasonal frozen regions, and ascertain the optimal replacement percentage of natural aggregate. Steel slag coarse aggregate (SSCA) was used to replace basalt coarse aggregate (BCA) at four levels (25%, 50%, 75%, 100%) by equal volume. The volume characteristics, mechanical properties, low-temperature cracking resistance, water stability, and freeze-thaw (F-T) durability of the mixture were assessed. The results indicated that the low-temperature cracking resistance of the mixture was significantly enhanced and acoustic emission (AE) energy was uniformly released by the incorporation of steel slag. Furthermore, the porosity, permeability, Marshall stability (MS), and the resistance against water damage and F-T cycles were also significantly improved. Based on the experimental results, the complete replacement of natural aggregate is advisable to obtain an optimal overall performance.

scholarly journals Novel Gradation Design of Porous Asphalt Concrete with Balanced Functional and Structural Performances

2020 ◽  
Vol 10 (20) ◽  
pp. 7019
Author(s):  
Xiang Ma ◽  
Hao Wang ◽  
Peisheng Zhou
Keyword(s):  
Low Temperature ◽  
Asphalt Concrete ◽  
Filler Content ◽  
The Novel ◽  
Mineral Filler ◽  
Cracking Resistance ◽  
Moisture Susceptibility ◽  
Porous Asphalt ◽  
Low Temperature Cracking ◽  
Porous Asphalt Concrete

To improve the permeability of porous asphalt concrete (PAC) with a small nominal maximum aggregate size (NMAS) of 10 mm (PAC10), a novel gradation design by excluding the 0.075–3 mm aggregate was developed. This study aims to evaluate the functional and structural performances of the novel PAC10 with various mineral filler contents, using the conventional PAC10 and 13 mm NMAS PAC (PAC13) as reference, and develop the optimum gradation of the novel PAC10. The performance properties evaluated include moisture susceptibility, durability, high-temperature stability, low-temperature cracking resistance and permeability. The results indicated that for the two conventional PACs with the same fine aggregate and mineral filler content, PAC10 had worse permeability and rutting resistance, similar moisture susceptibility and durability, and better low-temperature cracking resistance, compared with the PAC13. The novel PAC10 showed better permeability than the conventional PAC10. With the increase of the mineral filler content, the structural performance of the novel PAC10 is improved, but its permeability is decreased. With a mineral filler content of 6%, the novel PAC10 can have balanced functional and structural performances, which are equivalent to those of the conventional PAC13.

scholarly journals Evaluating the effect of asphalt binder modification on the low-temperature cracking resistance of hot mix asphalt

2019 ◽  
Vol 11 ◽  
pp. e00238 ◽  
Author(s):  
B.B. Teltayev ◽  
C.O. Rossi ◽  
G.G. Izmailova ◽  
E.D. Amirbayev ◽  
A.O. Elshibayev
Keyword(s):  
Low Temperature ◽  
Hot Mix Asphalt ◽  
Asphalt Binder ◽  
Cracking Resistance ◽  
Low Temperature Cracking

Laboratory Evaluation of Warm Stone Matrix Asphalt Mixture

2011 ◽  
Vol 243-249 ◽  
pp. 4178-4181 ◽  
Author(s):  
Shao Wen Du ◽  
Shan Shan Li
Keyword(s):  
Low Temperature ◽  
Mechanical Performance ◽  
Asphalt Mixture ◽  
Laboratory Evaluation ◽  
Performance Properties ◽  
Stone Matrix Asphalt ◽  
Low Temperature Cracking ◽  
Stone Mastic Asphalt ◽  
Marshall Stability ◽  
Warm Additives

Two kinds of warm additives, Sasobit and Evotherm DAT, were used to develop warm stone mastic asphalt (SMA) mixture. The test results showed that compaction temperature of SMA can be decreased by 30-40°C when using Sasobit or Evotherm DAT. Then, to compare the mechanical performance properties of SMA and warm SMAs, mechanical properties of pavement mixture, including Marshall stability, retained Marshall stability, tensile strength ratio, Cantabro loss, rutting dynamic stability and low temperature flexural strength, were tested in laboratory. The results indicated that Sasobit can decrease obviously the moisture resistance ability and low temperature cracking resistance ability of SMA. Therefore, the pavement performance properties of Sasobit warm SMA are inferior to those of Evotherm DAT warm SMA, which has the nearly same performance properties as hot SMA.

Thermal Cracking Models for AC and Modified AC Mixes in Alaska

1998 ◽  
Vol 1629 (1) ◽  
pp. 117-126 ◽  
Author(s):  
Lutfi Raad ◽  
Stephan Saboundjian ◽  
Peter Sebaaly ◽  
Jon Epps
Keyword(s):  
Low Temperature ◽  
Extreme Temperature ◽  
Thermal Cracking ◽  
Styrene Butadiene Rubber ◽  
Butadiene Rubber ◽  
Cracking Resistance ◽  
Dry Process ◽  
Wet Process ◽  
Low Temperature Cracking ◽  
Styrene Butadiene

Low-temperature cracking is a major distress mode in Alaskan pavements because of the extreme temperature conditions—which range, in some instances, from about −50°C in winter to more than 40°C in summer. The use of asphalt modifiers in Alaskan pavements occurred over the past 15 years. These modifiers include Styrene-Butadiene-Styrene polymers, Styrene-Butadiene-Rubber polymers, ULTRAPAVE, and CRM [both the dry process (PlusRide) and the wet process]. Field observations and laboratory studies in Alaska and elsewhere indicate that the use of these modifiers would improve the low-temperature cracking resistance of pavements. The degree to which these modifiers provide beneficial effects for Alaskan pavements needs to be evaluated. The objectives of this research were (1) To characterize asphalt and polymer modified asphalt from a number of selected sites using Superpave PG grading system and to conduct thermal stress restrained specimen tests (TSRST) and Superpave IDT laboratory tests on field specimens; (2) To compare low-temperature cracking performance using field surveys; (3) To verify the applicability of the Superpave thermal cracking model (TCMODEL) and other available models for predicting low temperature cracking; and (4) To recommend guidelines for predicting minimum pavement temperatures in Alaska. Results of this study indicate, in general, significant improvement in low-temperature cracking resistance when polymer modifiers are used. Comparisons between predicted and observed low-temperature cracking using available crack propagation models, including Superpave TCMODEL, were poor. An improved regression model was developed using minimum air temperature, TSRST fracture temperature and strength, and pavement age to fit the observed field data for both conventional and polymer modified sections.

Sign in / Sign up

Export Citation Format

Share Document