scholarly journals Assessment of Green Practices in Residential Buildings: A Survey-Based Empirical Study of Residents in Kazakhstan

2018 ◽  
Vol 10 (12) ◽  
pp. 4383 ◽  
Author(s):  
Serik Tokbolat ◽  
Ferhat Karaca ◽  
Serdar Durdyev ◽  
Farnush Nazipov ◽  
Ilyas Aidyngaliyev

In the lead-up to the Paris climate change conference, the majority of the UN Member States submitted their Intended Nationally Determined Contributions on carbon emissions reduction to be met by 2030. Kazakhstan is no exception. The government made pledges and, therefore, has to adapt its national policies and regulations to meet the set ambitious goals. In this regard, the role of residential building sector is of the utmost importance due to its significant share in the country’s energy consumption and carbon emissions profile. Thus, this study presents the types of residential buildings available and assesses how far they are from meeting the green building (GB) indicators set in various certification schemes and standards. This would help in suggesting practical steps to improve the sustainability levels of the residential building stock of Kazakhstan. This study collected a robust set of data on existing residential buildings in Astana, chosen as a case study location, classified them and, based on a developed checklist, evaluated their performance compared to GB standards. The study has found that old buildings tend to have a rather poor level of sustainability, whereas the sustainability of new buildings depends on the class of the building—steadily increasing from economy to premium class in all categories of the checklist. A detailed analysis of the results has led to the development of recommendations on how each type of building should be improved to meet the GB standards.

2021 ◽  
Vol 13 (8) ◽  
pp. 4099
Author(s):  
Ann-Kristin Mühlbach ◽  
Olaf Mumm ◽  
Ryan Zeringue ◽  
Oskars Redbergs ◽  
Elisabeth Endres ◽  
...  

The METAPOLIS as the polycentric network of urban–rural settlement is undergoing constant transformation and urbanization processes. In particular, the associated imbalance of the shrinkage and growth of different settlement types in relative geographical proximity causes negative effects, such as urban sprawl and the divergence of urban–rural lifestyles with their related resource, land and energy consumption. Implicitly related to these developments, national and global sustainable development goals for the building sector lead to the question of how a region can be assessed without detailed research and surveys to identify critical areas with high potential for sustainable development. In this study, the TOPOI method is used. It classifies settlement units and their interconnections along the urban–rural gradient, in order to quantify and assess the land-uptake and global warming potential driven by residential developments. Applying standard planning parameters in combination with key data from a comprehensive life cycle assessment of the residential building stock, a detailed understanding of different settlement types and their associated resource and energy consumption is achieved.


2019 ◽  
Vol 11 (8) ◽  
pp. 2195 ◽  
Author(s):  
Chen-Yi Sun ◽  
Yin-Guang Chen ◽  
Rong-Jing Wang ◽  
Shih-Chi Lo ◽  
Jyh-Tyng Yau ◽  
...  

The green building certification system of Taiwan, EEWH (Ecology, Energy Saving, Waste Reduction and Health), has been in operation for more than 20 years (since 1999). In order to understand the relationship between green building certification and the construction costs of residential buildings, this study obtained 37 green building-certified residential cases and 36 general residential cases available from public information and conducted a comparative analysis. The results of this study showed that the average construction cost of a green building certification residential building was only 1.58% higher than a general residential building, indicating that green building certification does not require a large increase in costs. However, for residential buildings, achieving a high-grade (gold-grade or diamond-grade) green building certification means an increase of 6.7% to 9.3% in construction costs. This shows that the pursuit of higher levels of green building certification does require higher construction costs. In addition, the results of this study can not only provide important references for the government in making green building policies, but also offer a practical strategy for developers for decision-making.


Author(s):  
Darija Gajić ◽  
Anna Sandak ◽  
Slobodan Peulić ◽  
Črtomir Tavzes ◽  
Tim Mavrič

System of prefabricated modules installed on the existing building envelope is one alternativesolution for deep energy refurbishment of buildings in the European Union. It allows thermalupgrade installation of new parts in the HVAC system. Moreover, some elements of the envelopecan be made of renewable materials. This research compares the residential building stock andidentifies potential types of buildings for energy refurbishment in Bosnia and Herzegovina andSlovenia. It presents refurbishment possibilities of existing residential building stock in bothcountries with prefabricated timber panels. It also presents potential obstacles to the widerapplication of this refurbishment solution.


Heritage ◽  
2020 ◽  
Vol 3 (4) ◽  
pp. 1433-1468
Author(s):  
Marco Vettore ◽  
Marco Donà ◽  
Pietro Carpanese ◽  
Veronica Follador ◽  
Francesca da Porto ◽  
...  

More than the 60% of the Italian residential building stock had already been built by 1974, when seismic codes were enforced on a minimal part of the country. Unreinforced masonry buildings represent most of that share, but they are typical for each region, in terms of both materials and structural configurations. The definition of ‘regional’, i.e., more specific, vulnerability and exposure models are required to improve existing forecast models. The research presents a new geographic information system (GIS)-based multilevel procedure for earthquake disaster prevention planning at urban scale; it includes multicriteria analysis, such as architectural types, structural vulnerability analysis, microzonation studies, and socio-economic aspects. The procedure has been applied to the municipality of Pordenone (PN), a district town of the Friuli–Venezia–Giulia region, in Northeast Italy. To assess the urban seismic risk, more than 5000 masonry residential buildings were investigated and common types within sub-municipal areas and exposure data were collected. Simplified mechanical analysis provided a ‘regional’ vulnerability model through typological fragility curves. The integration of results into GIS tool permitted the definition of cross-mapping among vulnerability, damage scenarios (conditional and unconditional) and exposure (seismic losses, casualties, impact), with respect to various earthquake intensities expected in the town. These results are presented at different scales: from the single building, to submunicipal area and to the entire town.


2017 ◽  
Vol 7 (1) ◽  
pp. 7-14 ◽  
Author(s):  
Soufiane Boukarta ◽  
Ewa Berezowska

AbstractIn the context of the Algerian energy policy, and through the review of the Algiers’ residential building stock, this paper explores the correlation between the energy consumption of gas and electricity with urban density. Based on a holistic approach of the 57 Algiers’ municipalities, the analysis is organized in two ways. Firstly, the spatial approach is conducted within a GIS implementation, carried out based on the 2013 aggregated annual energy consumption data. The cross analysis of Electricity and Gas consumption and density of population within a GIS spatial distribution approach shows effectively a strong correlation between urban density and energy consumption with a Pearson correlation of −56% and −65% of the Electricity and Gas consumption in the urban municipalities, respectively. Also, the household located in the suburban municipalities consume clearly more energy than the urban centered ones. Based on the electricity and gas consumption, density and carbon footprint we have clustered, within a PCA, the Algiers’ municipalities into three profiles: the “thrifty”, the “intermediate” and the “wasteful” profile.


2021 ◽  
Vol 13 (12) ◽  
pp. 6959
Author(s):  
Najib Rahman Sabory ◽  
Tomonobo Senjyu ◽  
Adina Hashemi Momand ◽  
Hadya Waqfi ◽  
Nilofar Saboor ◽  
...  

Urbanization and technology have proven to be detrimental to the environment. Buildings contribute a significant portion of this damage. This issue motivated governments, builders, engineers, and architects to seek ways to reduce buildings’ environmental footprints. Leadership in Energy and Environmental Design (LEED), developed by the U.S. Green Building Council (USGBC), is one of the most widely used strategies to ensure energy efficiency and a clean environment in buildings. In Afghanistan, where there are no active regulatory frameworks for energy saving and efficiency for the building sector, it is imperative to promote the transformation of the building industry and practices towards sustainability. In this regard, the role of the residential building sector is of utmost importance due to its major share in the country’s energy consumption and GHG emissions profile. Thus, this study assesses the energy efficiency and environmental impact of existing buildings in Kabul city concerning the LEED rating system. This research suggests practical steps to improve the sustainability of the residential building stock in Kabul city. Robust sets of data on existing residential buildings in Kabul are collected, classified, evaluated, and compared to LEED standards. This research reveals and concludes that most of the existing buildings in Kabul city are in poor conditions and do not meet the minimum requirements to be a candidate for LEED certification. A detailed analysis of the results has led to recommendations on how these buildings could improve to meet the LEED criteria. This is the first study of its kind conducted for Kabul city residential building. Considering the cross-sectoral nature of the building industry, the findings of this study will contribute to many other areas such as water, transportation, ICT, health, energy and the environment.


Author(s):  
Nermina Zagora ◽  
Mladen Burazor ◽  
Erdin Salihović

This paper intends to bring attention of both scientific and general audience to the status quo of the existing, residential building stock in Bosnia and Herzegovina, highlighting its energy savings potential. The research results presented in this text may be applicable on two levels: on a larger scale, the policy makers may use this data in the process of development of strategic and EE measures implementation plans, while, on a smaller scale, the individual users may gain practical insight into the benefits of energy saving measures and implement them in their own households. Moreover, the exposed data may be subject to further evaluations, studies and comparisons, while the presented methodology can be used by other researchers in countries where there have not been research activities on the existing residential buildings stock from the EE perspective.


Energies ◽  
2022 ◽  
Vol 15 (2) ◽  
pp. 449
Author(s):  
Hung Q. Do ◽  
Mark B. Luther ◽  
Mehdi Amirkhani ◽  
Zheng Wang ◽  
Igor Martek

In order to achieve Australia’s greenhouse gas emissions reduction targets, a majority of the existing residential building stock in Australia will require retrofitting in favour of energy-efficient solutions. This paper considers retrofitting for conditioning to be one of the most straightforward and offers the greatest potential to deliver significant comfort and energy-saving results. Radiant conditioning systems are not new, yet some game-changing innovations have taken place over the last decade that may require an entire paradigm shift in the manner we condition our buildings. The reiteration of the principle ‘thermally active systems’ suggests that our buildings need to accommodate these systems into the fabric of building components. However, extremely few products and/or innovative solutions for doing such seem to be provided by the industry. We seem incompetent with solutions that are not costing the Earth, insulating, lightweight, and offering an instant response time to conditioning. We still have the concept embedded in our minds that radiative systems consist of heavy ‘combat’ construction with time lags of a day or two and that they are very costly to implement, especially if we are to retrofit a project. The purpose of this paper is to rectify and change our understanding of radiant systems, namely through a review of the existing technology and its recent advancements. It intends to introduce the fact that radiant systems can become highly reactive, responsive, and thermally dynamic conditioning systems. Lightweight radiant systems can be 40% more energy-efficient than common air conditioners and can respond in less than 15 min rather than in the hours required of heavy radiant systems. Thus, an insulated, lightweight radiant system is ideal for retrofitting residential buildings. Furthermore, this paper supports and introduces various systems suited to retrofitting a residential building with hydronic radiant systems.


2019 ◽  
Vol 11 (22) ◽  
pp. 6482
Author(s):  
Katerina Sojkova ◽  
Martin Volf ◽  
Antonin Lupisek ◽  
Roman Bolliger ◽  
Tomas Vachal

Energy retrofitting of existing building stock has significant potential for the reduction of energy consumption and greenhouse gas emissions. Roughly half of the CO2 emissions from Czech building stock are estimated to be allocated to residential buildings. Approximately one-third of the Czech residential building stock have already been retrofitted, but retrofitting mostly takes place in large cities due to greater income. A favourable concept for the mass retrofitting of residential building stock, affordable even in low-income regions, was of interest. For a reference building, multi-criteria assessment of numerous retrofitting measures was performed. The calculation involved different building elements, materials, solutions, and energy-efficiency levels in combination with various heating systems. The assessment comprised environmental impact, represented by operational and embodied primary energy consumption and greenhouse gas emissions, and investment and operational costs using the annuity method. Analysis resulted in the identification of favourable retrofitting measures and showed that complex building retrofitting is advantageous from both a cost and an environmental point of view. The environmental burden could be decreased by approximately 10–30% even without photovoltaic installation, and costs per year could be decreased by around 40%.


2020 ◽  
Vol 36 (1_suppl) ◽  
pp. 298-320
Author(s):  
Ana Beatriz Acevedo ◽  
Catalina Yepes-Estrada ◽  
Daniela González ◽  
Vitor Silva ◽  
Miguel Mora ◽  
...  

This study presents a seismic risk assessment and a set of earthquake scenarios for the residential building stock of the three largest metropolitan centers of Colombia: Bogotá, Medellín and Cali (with 8.0, 2.5, and 2.4 million inhabitants, respectively). A uniform methodology was followed for the development of the seismic hazard, vulnerability, and exposure models, thus allowing a direct comparison between the seismic risk of the different cities. Risk metrics such as exceedance probability curves and average annual losses were computed for each city. The earthquake scenarios were selected considering events whose direct economic impact is similar to the aggregated loss for a probability of exceedance of 10% in 50 years. Results show a higher mean aggregate loss ratio for Cali and similar mean aggregate loss ratios for Bogotá and Medellín. All of the models used in this study are openly accessible, enabling risk modelers, engineers, and stakeholders to explore them for disaster risk management.


Sign in / Sign up

Export Citation Format

Share Document