scholarly journals Monitoring Mediterranean Oak Decline in a Peri-Urban Protected Area Using the NDVI and Sentinel-2 Images: The Case Study of Castelporziano State Natural Reserve

2018 ◽  
Vol 10 (9) ◽  
pp. 3308 ◽  
Author(s):  
Fabio Recanatesi ◽  
Chiara Giuliani ◽  
Maria Ripa
Keyword(s):  
Remote Sensing ◽  
Forest Canopy ◽  
Vegetation Index ◽  
Urban Forest ◽  
Forest Health ◽  
Canopy Cover ◽  
High Rate ◽  
Health Conditions ◽  
The Mediterranean ◽  
Sentinel 2

Climate change and human activities in particular are important causes of the possible variations in Mediterranean basin forest health conditions. Over the last decades, deciduous oak-forest mortality has been a recurrent problem in central and southern Italy. Despite the perception of increasingly visible damage in oak forests in drought sites, the role of various environmental factors in their decline is not completely clear. Among the modern methods of monitoring terrestrial ecosystems, remote sensing is of prime importance thanks to its ability to provide synoptic information on large areas with a high frequency of acquisition. This paper reports the preliminary results regarding a replicable and low cost monitoring tool planned to quantify forest health conditions based on the application of the Normalized Difference Vegetation Index (NDVI), using the diachronic images provided by the Sentinel-2 satellite. The study area is represented by a peri-urban forest of natural Mediterranean deciduous oaks, characterized by a high variability in the composition of the species and in the silvicultural structures. In order to monitor the health conditions of a specific forest canopy cover with remote sensing data, it is necessary to classify the forest canopy cover in advance to separate it from other species and from the Mediterranean scrub. This is due to the spatial distribution of vegetation and the high rate of biodiversity in the Mediterranean natural environment. To achieve this, Light Detection and Ranging (LiDAR) data, forest management data and field sampling data were analyzed. The main results of this research show a widespread decline in oak health conditions over the observed period (2015–2017). Specifically, for the studied area, thanks to the specific localization of the oak canopy cover, we detected a high potential concerning the Sentinel-2 data application in monitoring forest health conditions by NDVI application.

scholarly journals Detecting Long-Term Urban Forest Cover Change and Impacts of Natural Disasters Using High-Resolution Aerial Images and LiDAR Data

2020 ◽  
Vol 12 (11) ◽  
pp. 1820
Author(s):  
Raoul Blackman ◽  
Fei Yuan
Keyword(s):  
Remote Sensing ◽  
Ecosystem Services ◽  
Forest Canopy ◽  
High Spatial Resolution ◽  
Urban Forest ◽  
Urban Canopy ◽  
Canopy Cover ◽  
Random Point ◽  
Aerial Images ◽  
Lidar Data

Urban forests provide ecosystem services; tree canopy cover is the basic quantification of ecosystem services. Ground assessment of the urban forest is limited; with continued refinement, remote sensing can become an essential tool for analyzing the urban forest. This study addresses three research questions that are essential for urban forest management using remote sensing: (1) Can object-based image analysis (OBIA) and non-image classification methods (such as random point-based evaluation) accurately determine urban canopy coverage using high-spatial-resolution aerial images? (2) Is it possible to assess the impact of natural disturbances in addition to other factors (such as urban development) on urban canopy changes in the classification map created by OBIA? (3) How can we use Light Detection and Ranging (LiDAR) data and technology to extract urban canopy metrics accurately and effectively? The urban forest canopy area and location within the City of St Peter, Minnesota (MN) boundary between 1938 and 2019 were defined using both OBIA and random-point-based methods with high-spatial-resolution aerial images. Impacts of natural disasters, such as the 1998 tornado and tree diseases, on the urban canopy cover area, were examined. Finally, LiDAR data was used to determine the height, density, crown area, diameter, and volume of the urban forest canopy. Both OBIA and random-point methods gave accurate results of canopy coverages. The OBIA is relatively more time-consuming and requires specialist knowledge, whereas the random-point-based method only shows the total coverage of the classes without locational information. Canopy change caused by tornado was discernible in the canopy OBIA-based classification maps while the change due to diseases was undetectable. To accurately exact urban canopy metrics besides tree locations, dense LiDAR point cloud data collected at the leaf-on season as well as algorithms or software developed specifically for urban forest analysis using LiDAR data are needed.

scholarly journals Assessing Urban Forest Canopy Cover Using Airborne or Satellite Imagery

2008 ◽  
Vol 34 (6) ◽  
pp. 334-340
Author(s):  
Jeffrey Walton ◽  
David Nowak ◽  
Eric Greenfield
Keyword(s):  
Remote Sensing ◽  
New York ◽  
Forest Canopy ◽  
Urban Forest ◽  
Canopy Cover ◽  
Classification Methods ◽  
Remote Sensing Techniques ◽  
Many Sources ◽  
Forest Managers

With the availability of many sources of imagery and various digital classification techniques, assessing urban forest canopy cover is readily accessible to most urban forest managers. Understanding the capability and limitations of various types of imagery and classification methods is essential to interpreting canopy cover values. An overview of several remote sensing techniques used to assess urban forest canopy cover is presented. A case study comparing canopy cover percentages for Syracuse, New York, U.S. interprets the multiple values developed using different methods. Most methods produce relatively similar results, but the estimate based on the National Land Cover Database is much lower.

scholarly journals Estimation of Forest Canopy Cover and Forest Fragmentation Mapping Using Landsat Satellite Data of Silabati River Basin (India)

2020 ◽  
Vol 70 (4) ◽  
pp. 181-197
Author(s):  
Biswajit Bera ◽  
Soumik Saha ◽  
Sumana Bhattacharjee
Keyword(s):  
River Basin ◽  
Forest Fragmentation ◽  
Forest Canopy ◽  
Vegetation Index ◽  
Forest Health ◽  
Canopy Cover ◽  
Population Expansion ◽  
Forest Density ◽  
Forest Policies ◽  
Crown Density

AbstractForest is an imperative part of environment but in the recent years, forest areas are being transformed due to population expansion, unscientific urbanization and a rising trend of industrialization in some countries. Dense forests habitats have been fragmented into patch forest region. This paper attempts to find out the forest canopy or crown density and forest fragmentation areas as well as to identify the spatiotemporal changing paradigms of forest within the Silabati river basin. Forest Canopy Density and fragmentation models are an important craftsmanship to examine the health of the forest or vegetation in a given area. Various indices such as Normalize Difference Vegetation Index, Advanced Vegetation Index, Shadow Index, Bareness Index and ultimately weightage overlay analysis methods have been adopted to determine forest health or anthropogenic stress on forest habitats. Higher weight has been assigned to dense forest areas and open forest area has been given lower weight. The result shows that forest canopy or crown cover as well as forest density are radically reduced in between the time period 1998 and 2009. It is also stated that the total 116.549 km2 areas have been degraded during 11 years period (1998–2009) with a rate of 10.59 km2/year. Meanwhile, 180.02 km2 forest areas have been regained in between 2019 and 2009 with a rate of 18 km2/year that is possible only due to implementation of forest policies exclusively execution of participatory or joint forest management techniques.

scholarly journals Coupling Remote Sensing Data and AquaCrop Model for Simulation of Winter Wheat Growth under Rainfed and Irrigated Conditions in a Mediterranean Environment

Agronomy ◽  
2021 ◽  
Vol 11 (11) ◽  
pp. 2265
Author(s):  
Marie Therese Abi Saab ◽  
Razane El Alam ◽  
Ihab Jomaa ◽  
Sleiman Skaf ◽  
Salim Fahed ◽  
...  
Keyword(s):  
Remote Sensing ◽  
Winter Wheat ◽  
Vegetation Index ◽  
Vegetation Indices ◽  
Canopy Cover ◽  
Mediterranean Environment ◽  
Wheat Growth ◽  
Aquacrop Model ◽  
Rainfed Conditions ◽  
Sentinel 2

The coupling of remote sensing technology and crop growth models represents a promising approach to support crop yield prediction and irrigation management. In this study, five vegetation indices were derived from the Copernicus-Sentinel 2 satellite to investigate their performance monitoring winter wheat growth in a Mediterranean environment in Lebanon’s Bekaa Valley. Among those indices, the fraction of canopy cover was integrated into the AquaCrop model to simulate biomass and yield of wheat grown under rainfed conditions and fully irrigated regimes. The experiment was conducted during three consecutive growing seasons (from 2017 to 2019), characterized by different precipitation patterns. The AquaCrop model was calibrated and validated for different water regimes, and its performance was tested when coupled with remote sensing canopy cover. The results showed a good fit between measured canopy cover and Leaf Area Index (LAI) data and those derived from Sentinel 2 images. The R2 coefficient was 0.79 for canopy cover and 0.77 for LAI. Moreover, the regressions were fitted to relate biomass with Sentinel 2 vegetation indices. In descending order of R2, the indices were ranked: Fractional Vegetation Cover (FVC), LAI, the fraction of Absorbed Photosynthetically Active Radiation (fAPAR), the Normalized Difference Vegetation Index (NDVI), and the Enhanced Vegetation Index (EVI). Notably, FVC and LAI were highly correlated with biomass. The results of the AquaCrop calibration showed that the modeling efficiency values, NSE, were 0.99 for well-watered treatments and 0.95 for rainfed conditions, confirming the goodness of fit between measured and simulated values. The validation results confirmed that the simulated yield varied from 2.59 to 5.36 t ha−1, while the measured yield varied from 3.08 to 5.63 t ha−1 for full irrigation and rainfed treatments. After integrating the canopy cover into AquaCrop, the % of deviation of simulated and measured variables was reduced. The Root Mean Square Error (RMSE) for yield ranged between 0.08 and 0.69 t ha−1 before coupling and between 0.04 and 0.42 t ha−1 after integration. This result confirmed that the presented integration framework represents a promising method to improve the prediction of wheat crop growth in Mediterranean areas. Further studies are needed before being applied on a larger scale.

scholarly journals Estimating Forest Canopy Cover by Multiscale Remote Sensing in Northeast Jiangxi, China

Land ◽  
2021 ◽  
Vol 10 (4) ◽  
pp. 433
Author(s):  
Xiaolan Huang ◽  
Weicheng Wu ◽  
Tingting Shen ◽  
Lifeng Xie ◽  
Yaozu Qin ◽  
...  
Keyword(s):  
Remote Sensing ◽  
Large Scale ◽  
Forest Canopy ◽  
Canopy Cover ◽  
Google Earth ◽  
Tree Canopy ◽  
Landsat Data ◽  
High Resolution Data ◽  
Modis Ndvi ◽  
Tree Canopy Cover

This research was focused on estimation of tree canopy cover (CC) by multiscale remote sensing in south China. The key aim is to establish the relationship between CC and woody NDVI (NDVIW) or to build a CC-NDVIW model taking northeast Jiangxi as an example. Based on field CC measurements, this research used Google Earth as a complementary source to measure CC. In total, 63 sample plots of CC were created, among which 45 were applied for modeling and the remaining 18 were employed for verification. In order to ascertain the ratio R of NDVIW to the satellite observed NDVI, a 20-year time-series MODIS NDVI dataset was utilized for decomposition to obtain the NDVIW component, and then the ratio R was calculated with the equation R = (NDVIW/NDVI) *100%, respectively, for forest (CC >60%), medium woodland (CC = 25–60%) and sparse woodland (CC 1–25%). Landsat TM and OLI images that had been orthorectified by the provider USGS were atmospherically corrected using the COST model and used to derive NDVIL. R was multiplied for the NDVIL image to extract the woody NDVI (NDVIWL) from Landsat data for each of these plots. The 45 plots of CC data were linearly fitted to the NDVIWL, and a model with CC = 103.843 NDVIW + 6.157 (R2 = 0.881) was obtained. This equation was applied to predict CC at the 18 verification plots and a good agreement was found (R2 = 0.897). This validated CC-NDVIW model was further applied to the woody NDVI of forest, medium woodland and sparse woodland derived from Landsat data for regional CC estimation. An independent group of 24 measured plots was utilized for validation of the results, and an accuracy of 83.0% was obtained. Thence, the developed model has high predictivity and is suitable for large-scale estimation of CC using high-resolution data.

scholarly journals Mapping of the Canopy Openings in Mixed Beech–Fir Forest at Sentinel-2 Subpixel Level Using UAV and Machine Learning Approach

2020 ◽  
Vol 12 (23) ◽  
pp. 3925
Author(s):  
Ivan Pilaš ◽  
Mateo Gašparović ◽  
Alan Novkinić ◽  
Damir Klobučar
Keyword(s):  
Machine Learning ◽  
Forest Canopy ◽  
Vegetation Index ◽  
Predictive Performance ◽  
Spatial Extent ◽  
Gradient Boosting ◽  
Support Vector ◽  
Stochastic Gradient Boosting ◽  
Extreme Gradient Boosting ◽  
Sentinel 2

The presented study demonstrates a bi-sensor approach suitable for rapid and precise up-to-date mapping of forest canopy gaps for the larger spatial extent. The approach makes use of Unmanned Aerial Vehicle (UAV) red, green and blue (RGB) images on smaller areas for highly precise forest canopy mask creation. Sentinel-2 was used as a scaling platform for transferring information from the UAV to a wider spatial extent. Various approaches to an improvement in the predictive performance were examined: (I) the highest R2 of the single satellite index was 0.57, (II) the highest R2 using multiple features obtained from the single-date, S-2 image was 0.624, and (III) the highest R2 on the multitemporal set of S-2 images was 0.697. Satellite indices such as Atmospherically Resistant Vegetation Index (ARVI), Infrared Percentage Vegetation Index (IPVI), Normalized Difference Index (NDI45), Pigment-Specific Simple Ratio Index (PSSRa), Modified Chlorophyll Absorption Ratio Index (MCARI), Color Index (CI), Redness Index (RI), and Normalized Difference Turbidity Index (NDTI) were the dominant predictors in most of the Machine Learning (ML) algorithms. The more complex ML algorithms such as the Support Vector Machines (SVM), Random Forest (RF), Stochastic Gradient Boosting (GBM), Extreme Gradient Boosting (XGBoost), and Catboost that provided the best performance on the training set exhibited weaker generalization capabilities. Therefore, a simpler and more robust Elastic Net (ENET) algorithm was chosen for the final map creation.

scholarly journals Detecting Cover Crop End-Of-Season Using VENµS and Sentinel-2 Satellite Imagery

2020 ◽  
Vol 12 (21) ◽  
pp. 3524
Author(s):  
Feng Gao ◽  
Martha C. Anderson ◽  
W. Dean Hively
Keyword(s):  
Remote Sensing ◽  
Time Series ◽  
Cover Crops ◽  
Cover Crop ◽  
Vegetation Index ◽  
Normalized Difference Vegetation Index ◽  
Agricultural Research ◽  
Agricultural Landscapes ◽  
Absolute Difference ◽  
Sentinel 2

Cover crops are planted during the off-season to protect the soil and improve watershed management. The ability to map cover crop termination dates over agricultural landscapes is essential for quantifying conservation practice implementation, and enabling estimation of biomass accumulation during the active cover period. Remote sensing detection of end-of-season (termination) for cover crops has been limited by the lack of high spatial and temporal resolution observations and methods. In this paper, a new within-season termination (WIST) algorithm was developed to map cover crop termination dates using the Vegetation and Environment monitoring New Micro Satellite (VENµS) imagery (5 m, 2 days revisit). The WIST algorithm first detects the downward trend (senescent period) in the Normalized Difference Vegetation Index (NDVI) time-series and then refines the estimate to the two dates with the most rapid rate of decrease in NDVI during the senescent period. The WIST algorithm was assessed using farm operation records for experimental fields at the Beltsville Agricultural Research Center (BARC). The crop termination dates extracted from VENµS and Sentinel-2 time-series in 2019 and 2020 were compared to the recorded termination operation dates. The results show that the termination dates detected from the VENµS time-series (aggregated to 10 m) agree with the recorded harvest dates with a mean absolute difference of 2 days and uncertainty of 4 days. The operational Sentinel-2 time-series (10 m, 4–5 days revisit) also detected termination dates at BARC but had 7% missing and 10% false detections due to less frequent temporal observations. Near-real-time simulation using the VENµS time-series shows that the average lag times of termination detection are about 4 days for VENµS and 8 days for Sentinel-2, not including satellite data latency. The study demonstrates the potential for operational mapping of cover crop termination using high temporal and spatial resolution remote sensing data.

scholarly journals Assessment of Maize Growth and Development with High- and Medium-Resolution Remote Sensing Products

Agronomy ◽  
2021 ◽  
Vol 11 (5) ◽  
pp. 940
Author(s):  
Rocío Ballesteros ◽  
Miguel A. Moreno ◽  
Fellype Barroso ◽  
Laura González-Gómez ◽  
José F. Ortega
Keyword(s):  
Remote Sensing ◽  
Precision Agriculture ◽  
Vegetation Index ◽  
Normalized Difference Vegetation Index ◽  
Landsat Imagery ◽  
Canopy Cover ◽  
Remote Sensing Data ◽  
Multilinear Regression ◽  
Area Index ◽  
Canopy Development

The availability of a great amount of remote sensing data for precision agriculture purposes has set the question of which resolution and indices, derived from satellites or unmanned aerial vehicles (UAVs), offer the most accurate results to characterize vegetation. This study focused on assessing, comparing, and discussing the performances and limitations of satellite and UAV-based imagery in terms of canopy development, i.e., the leaf area index (LAI), and yield, i.e., the dry aboveground biomass (DAGB), for maize. Three commercial maize fields were studied over four seasons to obtain the LAI and DAGB. The normalized difference vegetation index (NDVI) and visible atmospherically resistant index (VARI) from satellite platforms (Landsat 5TM, 7 ETM+, 8OLI, and Sentinel 2A MSI) and the VARI and green canopy cover (GCC) from UAV imagery were compared. The remote sensing predictors in addition to the growing degree days (GDD) were assessed to estimate the LAI and DAGB using multilinear regression models (MRMs). For LAI estimation, better adjustments were obtained when predictors from the UAV platform were considered. The DAGB estimation revealed similar adjustments for both platforms, although the Landsat imagery offered slightly better adjustments. The results obtained in this study demonstrate the advantage of remote sensing platforms as a useful tool to estimate essential agronomic features.

scholarly journals ASSESSING URBAN FOREST CANOPY COVER IN GREAT PLAIN CONSERVATION AREA (DÜZCE CITY, TURKEY) BETWEEN 1984 AND 2015

2021 ◽  
Vol XLVI-4/W5-2021 ◽  
pp. 539-544
Author(s):  
Z. Uçar ◽  
R. Eker ◽  
A. Aydin
Keyword(s):  
Ecosystem Services ◽  
Forest Canopy ◽  
Urban Forest ◽  
Canopy Cover ◽  
Tree Canopy ◽  
Urban Trees ◽  
Conservation Area ◽  
Urban Tree ◽  
Tree Canopy Cover ◽  
Urban Tree Canopy

Abstract. Urban trees and forests are essential components of the urban environment. They can provide numerous ecosystem services and goods, including but not limited to recreational opportunities and aesthetic values, removal of air pollutants, improving air and water quality, providing shade and cooling effect, reducing energy use, and storage of atmospheric CO2. However, urban trees and forests have been in danger of being lost by dense housing resulting from population growth in the cities since the 1950s, leading to increased local temperature, pollution level, and flooding risk. Thus, determining the status of urban trees and forests is necessary for comprehensive understanding and quantifying the ecosystem services and goods. Tree canopy cover is a relatively quick, easy to obtain, and cost-effective urban forestry metric broadly used to estimate ecosystem services and goods of the urban forest. This study aimed to determine urban forest canopy cover areas and monitor the changes between 1984–2015 for the Great Plain Conservation area (GPCA) that has been declared as a conservation Area (GPCA) in 2017, located on the border of Düzce City (Western Black Sea Region of Turkey). Although GPCA is a conservation area for agricultural purposes, it consists of the city center with 250,000 population and most settlement areas. A random point sampling approach, the most common sampling approach, was applied to estimate urban tree canopy cover and their changes over time from historical aerial imageries. Tree canopy cover ranged from 16.0% to 27.4% within the study period. The changes in urban canopy cover between 1984–1999 and 1999–2015 were statistically significant, while there was no statistical difference compared to the changes in tree canopy cover between 1984–2015. The result of the study suggested that an accurate estimate of urban tree canopy cover and monitoring long-term canopy cover changes are essential to determine the current situation and the trends for the future. It will help city planners and policymakers in decision-making processes for the future of urban areas.

Sign in / Sign up

Export Citation Format

Share Document