scholarly journals Laboratory Evaluation of Hot Asphalt Concrete Properties with Cuban Recycled Concrete Aggregates

2018 ◽  
Vol 10 (8) ◽  
pp. 2590 ◽  
Author(s):  
Debora Acosta Alvarez ◽  
Anadelys Alonso Aenlle ◽  
Antonio Tenza-Abril
Keyword(s):  
Asphalt Concrete ◽  
Aggregate Size ◽  
Asphalt Mixtures ◽  
Recycled Concrete ◽  
Construction And Demolition Waste ◽  
Recycled Aggregates ◽  
Laboratory Evaluation ◽  
Maximum Aggregate Size ◽  
Demolition Waste ◽  
Aggregate Fraction

Recycled Aggregates (RA) from construction and demolition waste (CDW) are a technically viable alternative to manufacture of asphalt concrete (AC). The main objective of this work is to evaluate the properties of hot asphalt mixtures that have been manufactured with different sources of CDW (material from concrete test specimens, material from the demolition of sidewalks and waste from prefabrication plants) from Cuba. Dense asphalt mixtures were manufactured with a maximum aggregate size of 19 mm, partially replacing (40%) the natural aggregate fraction measured between 5 mm and 10 mm with three types of RA from Cuba. Marshall specimens were manufactured to determine the main properties of the AC in terms of density, voids, stability and deformation. Additionally, the stiffness modulus of the AC was evaluated at 7 °C, 25 °C and 50 °C. The results corroborate the potential for using these sources of CDW from Cuba as a RA in asphalt concrete, thereby contributing an important environmental and economic benefit.

scholarly journals Influence of Partial Coarse Fraction Substitution of Natural Aggregate by Recycled Concrete Aggregate in Hot Asphalt Mixtures

2019 ◽  
Vol 12 (1) ◽  
pp. 250 ◽  
Author(s):  
Debora Acosta Álvarez ◽  
Anadelys Alonso Aenlle ◽  
Antonio José Tenza-Abril ◽  
Salvador Ivorra
Keyword(s):  
Asphalt Concrete ◽  
Coarse Fraction ◽  
Asphalt Mixtures ◽  
Recycled Concrete ◽  
Construction And Demolition Waste ◽  
Recycled Aggregate ◽  
Concrete Aggregate ◽  
Recycled Concrete Aggregate ◽  
Demolition Waste ◽  
Natural Aggregate

The main objective of this work is to evaluate the properties of hot asphalt mixtures that have been manufactured with different recycled concrete aggregate (RCA) percentages (0%, 20%, 40%, 60% and 80% of the fraction 5–13 mm) and asphalt (4%, 4.5% and 5%). Dense asphalt mixtures were made; partially replacing the natural aggregate (NA) fraction between 5 and 13 mm. Marshall specimens were manufactured to determine the main properties of the asphalt concrete (AC) in terms of density, voids, stability and deformation. Additionally, the optimal asphalt content (OAC) was determined, and measured the water sensibility, the stiffness modulus and the permanent deformation. The results corroborate the potential for using these sources of construction and demolition waste (CDW) as a RCA in asphalt concrete and show that the hot asphalt mixtures with up to 40% substitution of natural aggregate by recycled aggregate in the fraction 5–13 mm present good behavior.

scholarly journals Comparative study of the influence of three types of fibre in the shrinkage of recycled mortar

2018 ◽  
Vol 68 (332) ◽  
pp. 168 ◽  
Author(s):  
P. Saiz-Martínez ◽  
D. Ferrández-Vega ◽  
C. Morón-Fernández ◽  
A. Payán de Tejada-Alonso
Keyword(s):  
Negative Impact ◽  
Polypropylene Fiber ◽  
Capacitive Sensor ◽  
Recycled Concrete ◽  
Construction And Demolition Waste ◽  
Moisture Loss ◽  
Recycled Aggregates ◽  
Fiber Types ◽  
Demolition Waste ◽  
Recycled Concrete Aggregates

Construction and demolition waste can be used as a substitution of natural aggregate in mortar and concrete elaboration. A poorer quality of recycled aggregates generally has negative impact on mortar properties. Shrinkage is one of the properties that experiences worse outcome due to the higher absorption of recycled aggregates. This research evaluates the potential shrinkage of mortars elaborated with recycled concrete aggregates both with and without fibres addition, as well as the relation between moisture loss and shrinkage caused by mortar drying process using a capacitive sensor of the authors’ own design. Two different mortar dosages 1:3 and 1:4 and three fiber types: polypropylene fiber, fiberglass and steel fiber, in different proportions were used. Obtained results show that the use of polypropylene fiber improves the recycled mortars performance against shrinkage in 0.2%. Moreover, a clear relation between dry shrinkage and moisture loss was observed.

scholarly journals Complete Real-Scale Application of Recycled Aggregates in a Port Loading Platform in Huelva, Spain

Materials ◽  
2020 ◽  
Vol 13 (11) ◽  
pp. 2651
Author(s):  
Francisco Agrela ◽  
Francisco González-Gallardo ◽  
Julia Rosales ◽  
Javier Tavira ◽  
Jesús Ayuso ◽  
...  
Keyword(s):  
Civil Engineering ◽  
Recycled Concrete ◽  
Environmental Benefits ◽  
Construction And Demolition Waste ◽  
Recycled Aggregates ◽  
Base Layer ◽  
Recycling Rate ◽  
Demolition Waste ◽  
Technical Requirements ◽  
Real Scale

The application of recycled aggregates (RA) from construction and demolition waste and crushed concrete blocks is a very important challenge for the coming years from the environmental point of view, in order to reduce the exploitation of natural resources. In Spain, the use of these recycled materials in the construction of road bases and sub-bases is growing significantly. However, presently, there are few studies focused on the properties and behavior of RA in civil works such as road sections or seaport platforms. In this work, two types of RA were studied and used in a complete real-scale application. Firstly, recycled concrete aggregates (RCA) were applied in the granular base layer under bituminous superficial layers, and secondly mixed recycled aggregates (MRA) which contain a mix of ceramic, asphalt, and concrete particles were applied in the granular subbase layer, under the base layer made with RCA. Both RA were applied in a port loading platform in Huelva, applying a 100% recycling rate. This civil engineering work complied with the technical requirements of the current Spanish legislation required for the use of conventional aggregates. The environmental benefits of this work have been very relevant, and it should encourage the application of MRA and RCA in civil engineering works such as port platforms in a much more extended way. This is the first and documented real-scale application of RA to completely build the base and sub-base of a platform in the Huelva Port, Spain, replacing 100% of natural aggregates with recycled ones.

Laboratory Evaluation of Mixture Type on Highly Modified Asphalt Mixtures in Virginia

2018 ◽  
Vol 2672 (28) ◽  
pp. 59-68
Author(s):  
Benjamin F. Bowers
Keyword(s):  
Asphalt Binder ◽  
Aggregate Size ◽  
Asphalt Mixtures ◽  
Laboratory Evaluation ◽  
Maximum Aggregate Size ◽  
Air Voids ◽  
Modified Asphalt ◽  
Modified Asphalt Binder ◽  
Dynamic Modulus Test ◽  
Scb Specimen

The work presented attempts to address reflective cracking of asphalt-surfaced pavements through binder modification with a highly polymer (HP)-modified asphalt binder. Nine asphalt mixtures ranging from fine dense-graded mixtures to stone matrix asphalt (SMA) mixtures were investigated with conventional polymer modified binders and HP binder. The dynamic modulus test, overlay test (OT), and semi-circular bend (SCB) test were used to evaluate the mixtures. In the cracking tests, HP mixtures outperformed the conventionally modified control mixtures for the same mixture type. For HP mixtures, in general, SMA mixtures performed better in the cracking test than dense-graded mixtures. One of the dense-graded mixtures having larger nominal maximum aggregate size (NMAS) performed better than the mixture with a smaller NMAS, whereas the other having a larger NMAS was not significantly different in crack testing. Further, a discussion on the calculation of bulk specific gravity and percent air voids in a cut OT and SCB specimen using saturated surface dry or vacuum sealing methods is presented.

Production of upgraded recycled aggregates from construction and demolition waste for replacement of primary sand in cement mortars

2020 ◽  
Author(s):  
Michael Galetakis ◽  
Athanasia Soultana ◽  
Theodoros Daskalakis
Keyword(s):  
Water Absorption ◽  
Cement Paste ◽  
Cement Mortar ◽  
Recycled Concrete ◽  
Construction And Demolition Waste ◽  
Recycled Aggregates ◽  
Demolition Waste ◽  
Cement Mortars ◽  
Limestone Sand ◽  
Crushed Limestone

<p>Waste concrete is the most predominant constituent material among construction and demolition waste. Recycling of this material could minimize landfilled waste and mineral resources depletion. This study investigates, in laboratory scale, the production of upgraded recycled concrete aggregates, suitable for the replacement of primary (crushed limestone sand) used in cement mortars, by means of selective crushing and autogenous grinding. These particle size reduction techniques, compared to traditional crushing/grinding, have the potential to remove the brittle cement paste from the aggregates, thus significantly improving their quality. The granulometry, the density, the water absorption (EN 13755) and the flow coefficient (EN 933-6) of the produced upgraded sand was determined and compared to crushed limestone sand. Subsequently, cement mortar specimens were manufactured using upgraded aggregates for total replacement of crushed limestone sand. Specimens were tested for their compressive and flexural strength (EN 196-1), density and water absorption. Results indicated that the upgraded recycled sand produced through the selective crushing and autogenous grinding processes had improved properties compared to the one produced by conventional crushing processes (flexural and compressive strength of cement mortar specimens were increased by 29% and 7%, respectively). However, the quality of the upgraded sand is lower than that of the primary crushed limestone. To further explore the issue, it is planned to investigate in more detail the process of autogenous grinding and to investigate the use of other selective aggregate-cement paste liberation technologies.</p>

scholarly journals Upgrading the Quality of Recycled Aggregates from Construction and Demolition Waste by Using a Novel Brick Separation and Surface Treatment Method

Materials ◽  
2020 ◽  
Vol 13 (13) ◽  
pp. 2893
Author(s):  
Kui Hu ◽  
Yujing Chen ◽  
Caihua Yu ◽  
Dong Xu ◽  
Shihao Cao ◽  
...  
Keyword(s):  
Surface Treatment ◽  
Precast Concrete ◽  
Highway Construction ◽  
Recycled Concrete ◽  
Construction And Demolition Waste ◽  
Recycled Aggregates ◽  
Base Layer ◽  
Quality Level ◽  
Demolition Waste ◽  
Shape Characteristics

Mixed recycled aggregates (MRA) from construction and demolition waste (CDW) with high-purity and environmental performance are required for highway construction application in base layer and precast concrete curbs. The main problematic constituents that reduce the quality level of the recycled aggregates applications are brick components, flaky particles, and attached mortar, which make up a large proportion of CDW in some countries. This paper studies the potential of brick separation technology based on shape characteristics in order to increase the recycled concrete aggregates (RCA) purity for MRA quality improvement. MRA after purification was also processed with surface treatment experiment by rotating in a cylinder to improve the shape characteristics and to remove the attached mortar. The purity, strength property, densities, water absorption ratio, shape index, and mortar removal ratio of MRA were studied before and after the use of the brick separation and surface treatment proposed in this study. Finally, the recycled aggregates upgradation solution was adopted in a stationary recycling plant designed for a length of 113 km highway construction. The properties of CDW mixed concrete for precast curbs manufacturing were conducted. The results indicate that problematic fractions (brick components, particle shape, and surface weakness) in the MRA were significantly reduced by using brick separation and surface treatment solution. Above all, it is very important that the proposed brick separation method was verified to be practically adopted in CDW recycling plant for highway base layer construction and concrete curbs manufacturing at a low cost.

scholarly journals Development of Concrete Incorporating Recycled Aggregates, Hydrated Lime and Natural Volcanic Pozzolan

2021 ◽  
Vol 6 (11) ◽  
pp. 155
Author(s):  
Natividad Garcia-Troncoso ◽  
Bowen Xu ◽  
Wilhenn Probst-Pesantez
Keyword(s):  
Compressive Strength ◽  
Recycled Concrete ◽  
Construction And Demolition Waste ◽  
Recycled Aggregate ◽  
Recycled Aggregates ◽  
Partial Replacement ◽  
Demolition Waste ◽  
Crushed Concrete ◽  
Natural Pozzolana ◽  
Concrete Materials

Recycling of construction and demolition waste is a central point of discussion throughout the world. The application of recycled concrete as partial replacement of mineral aggregates in concrete mixes is one of the alternatives in the reduction of pollution and savings in carbon emissions. The combined influence of the recycled crushed concrete, lime, and natural pozzolana on the mechanical and sustainable properties of concrete materials is firstly proposed in this study. In this research, unconventional construction materials are employed to produce concrete: the recycled crushed concrete is used as coarse aggregate, while lime and natural pozzolana are used as a partial replacement for cement. Substitutions of 10%, 20%, 50% of gravel are made with recycled aggregates, and 2%, 5%, 10% of cement with lime and natural pozzolan. Tests on the fresh and hardened properties, destructive (compressive strength) and non-destructive tests (sclerometer rebound and ultrasound) of mixtures are carried out. It is shown that the use of recycled materials can provide an increase in compressive strength of up to 34% with respect to conventional concrete. Life cycle cost and sustainability assessments indicate that concrete materials incorporating recycled aggregate possess good economic and environmental impacts.

scholarly journals Concrete-Based and Mixed Waste Aggregates in Rendering Mortars

2020 ◽  
Author(s):  
Cinthia Maia Pederneiras
Keyword(s):  
Mechanical Performance ◽  
Ceramic Materials ◽  
Cementitious Materials ◽  
Recycled Concrete ◽  
Construction And Demolition Waste ◽  
Recycled Aggregates ◽  
Concrete Aggregate ◽  
Demolition Waste ◽  
Recycled Concrete Aggregates ◽  
Mixed Recycled Aggregates

The construction industry is considered the biggest waste producer in Europe. In order to encourage recycling, European Parliament decreed through the Waste Framework Directive 2008/98/EC, that at least 70% of construction and demolition waste should be recycled by 2020. From recycling plants, three types of recycled aggregates are produced. Recycled Concrete Aggregate, mainly from cementitious waste, as such as concrete and mortars residues; Recycled Masonry Aggregates mainly composed by recycled ceramic materials, as such as tiles and bricks residues; Mixed Recycled Aggregates based on rubble residues, from heterogenous materials waste. This research evaluated the technical feasibility of rendering mortars with Recycled Concrete Aggregates and Mixed Recycled Aggregates, in different volume incorporation of 0%, 20%, 50% and 100%. The experimental programme comprised an analyse of the fresh and hardened properties, regarding the water and mechanical behaviour of the mortars. From the results, it was noticed that the modified mortars presented a reduction in the modulus of elasticity, which its correlated to a less susceptibility to cracking. Regarding mechanical performance, the modified mortars obtained reduction of the flexural and compressive strength over time. However, it was not a significant harmful criterion. Therefore, the incorporation of recycled aggregates in cementitious materials is considered a technical and sustainable solution.

A Novel Conceptual Approach for Predicting the Mechanical Properties of Recycled Aggregate Concrete

2016 ◽  
Vol 847 ◽  
pp. 156-165
Author(s):  
Marco Pepe ◽  
Eduardus Koenders ◽  
Romildo Dias Toledo Filho ◽  
Enzo Martinelli
Keyword(s):  
Mechanical Properties ◽  
Recycled Concrete ◽  
Recycled Aggregate Concrete ◽  
Construction And Demolition Waste ◽  
Recycled Aggregate ◽  
Recycled Aggregates ◽  
Conceptual Approach ◽  
Demolition Waste ◽  
Predictive Capacity ◽  
Moisture Condition

The construction sector is more and more committed to reduce its environmental impacts. One of the key actions undertaken in the last decade deals with the ability of turning construction and demolition waste into new raw materials. For instance, the use of recycled aggregates for producing new concrete was one of the most investigated. Thus, in the last decade, plenty of researches were involved in project on characterising the mechanical behaviour of concrete made with recycled aggregates. However, these projects were mainly experimental in nature and generally led to merely empirical formulations. Conversely, this paper is intended at providing a contribution for predicting the mechanical properties of Recycled Aggregates Concrete (RAC). Particularly, it aims at quantifying the effect of replacing ordinary aggregates with Recycled Concrete Aggregates (RCA) on the resulting compressive strength of RAC. To this end, a conceptual model considering both the relevant physical properties of regular and recycled aggregates, including the attached mortar content, and the hydration reactions of Portland cement paste is proposed. The actual predictive capacity of the proposed model is assessed through an experimental validation against experimental tests carried out on several concrete batches produced with various values for the different keys parameters, such as the nominal water-to-cement ratio, the aggregates replacement ratio and the initial moisture condition of aggregates. Both the experimental data and the theoretical formulations proposed in this paper stem out from the inter-university collaboration developed as part of the EU funded EnCoRe Project (www.encore-fp7.unisa.it).

scholarly journals Influence of Wetting and Drying Cycles on Physical and Mechanical Behavior of Recycled Aggregate Concrete

Materials ◽  
2020 ◽  
Vol 13 (24) ◽  
pp. 5675
Author(s):  
Caroline S. Rangel ◽  
Mayara Amario ◽  
Marco Pepe ◽  
Enzo Martinelli ◽  
Romildo D. Toledo Filho
Keyword(s):  
Recycled Concrete ◽  
Recycled Aggregate Concrete ◽  
Construction And Demolition Waste ◽  
Recycled Aggregate ◽  
Recycled Aggregates ◽  
Demolition Waste ◽  
Wetting And Drying ◽  
Aggregate Concrete ◽  
Wetting And Drying Cycles ◽  
The Impact

Recently, concerns have been rising about the impact of increasing the depletion of natural resources and the relevant generation of construction and demolition waste, on the environment and economy. Therefore, several efforts have been made to promote sustainable efficiency in the construction industry and the use of recycled aggregates derived from concrete debris for new concrete mixtures (leading to so-called recycled aggregate concrete, RAC) is one of the most promising solutions. Unfortunately, there are still gaps in knowledge regarding the durability performances of RAC. In this study, we investigate durability of structural RAC subjected to wet-dry cycles. We analyze the results of an experimental campaign aimed at evaluating the degradation process induced by wetting and drying cycles on the key physical and mechanical properties of normal- and high-strength concrete, produced with coarse recycled concrete aggregates (RCAs) of different sizes and origins. On the basis of the results we propose a degradation law for wetting and drying cycles, which explicitly makes a possible correlation between the initial concrete porosity, directly related to the specific properties of the RCAs and the resulting level of damage obtained in RAC samples.

Sign in / Sign up

Export Citation Format

Share Document