scholarly journals Design and Performance Analysis of a Compact Planar MIMO Antenna for IoT Applications

Sensors ◽  
2021 ◽  
Vol 21 (23) ◽  
pp. 7909
Author(s):  
Saminathan Thiruvenkadam ◽  
Eswaran Parthasarathy ◽  
Sandeep Kumar Palaniswamy ◽  
Sachin Kumar ◽  
Lulu Wang
Keyword(s):  
Multiple Input Multiple Output ◽  
Back Side ◽  
Mimo Antenna ◽  
Iot Applications ◽  
Quarter Wavelength ◽  
Low Profile ◽  
Compact Size ◽  
Communication Devices ◽  
Input Multiple Output ◽  
And Performance

This article presents a quad-band multiple-input-multiple-output (MIMO) antenna for the Internet of Things (IoT) applications. The proposed antenna consists of four quarter-wavelength asymmetrical meandered radiators, microstrip feed lines, and modified ground planes. The antenna elements are arranged in a chiral pattern to improve isolation between them, with two radiators and two ground planes placed on the front side of the substrate and the other two on the back side. The MIMO antenna has an operating bandwidth (S11 ≤ −10 dB) of 1.76–1.84 GHz, 2.37–2.56 GHz, 3.23–3.68 GHz, and 5.34–5.84 GHz, covering GSM, WLAN, WiMAX, and 5G frequency bands. The isolation between the radiating elements is greater than 18 dB in the operating bands. The peak gain of the antenna is 3.6 dBi, and the envelope correlation coefficient (ECC) is less than 0.04. Furthermore, the proposed antenna is validated for IoT-based smart home (SH) applications. The prototype MIMO antenna is integrated with a commercially available ZigBee device, and the measured values are found to be consistent with the expected results. The proposed MIMO antenna could be a good candidate for IoT systems/modules due to its low profile, compact size, lightweight, and easy integration with wireless communication devices.

scholarly journals Nature Inspired MIMO Antenna System for Future mmWave Technologies

Micromachines ◽  
2020 ◽  
Vol 11 (12) ◽  
pp. 1083
Author(s):  
Saifur Rahman ◽  
Xin-cheng Ren ◽  
Ahsan Altaf ◽  
Muhammad Irfan ◽  
Mujeeb Abdullah ◽  
...  
Keyword(s):  
Communication Systems ◽  
High Efficiency ◽  
Multiple Input Multiple Output ◽  
Antenna System ◽  
Potential Candidate ◽  
Mimo Antenna ◽  
Communication Devices ◽  
Input Multiple Output ◽  
Measured Efficiency ◽  
5G Communication

In this work, a new Multiple Input Multiple Output (MIMO) antenna system with a novel shape inspired by nature is proposed for Fifth-Generation (5G) communication systems. The antenna is designed on a Rogers 5880. The dielectric constant of the substrate is 2.2, and the loss tangent is assumed to be 0.0009. The gain of the system for the desired bandwidth is nearly 8 dB. The simulated and the measured efficiency of the proposed system is 95% and 80%, respectively. To demonstrate the capability of the system as a potential candidate for future 5G communication devices, MIMO key performance parameters such as the Envelope Correlation Coefficient (ECC) and Diversity Gain (DG) are computed. It is found that the proposed system has low ECC, constant DG, and high efficiency for the desired bandwidth.

scholarly journals Dual-Band 2 × 2 MIMO Antenna with Compact Size and High Isolation Based on Half-Mode SIW

2020 ◽  
Vol 2020 ◽  
pp. 1-11
Author(s):  
Abubaker Ahmed Elobied ◽  
Xue-Xia Yang ◽  
Ningjie Xie ◽  
Steven Gao
Keyword(s):  
Multiple Input Multiple Output ◽  
Dual Band ◽  
Antenna Element ◽  
Mimo Antenna ◽  
High Isolation ◽  
Rectangular Patch ◽  
Compact Size ◽  
Multiple Input ◽  
Input Multiple Output ◽  
Proximity Coupling

This paper presents a close-spaced dual-band 2 × 2 multiple-input multiple-output (MIMO) antenna with high isolation based on half-mode substrate integrated waveguide (HMSIW). The dual-band operation of the antenna element is achieved by loading a rectangular patch outside the radiating aperture of an HMSIW cavity. The HMSIW cavity is excited by a coaxial probe, whereas the rectangular patch is energized through proximity coupling by the radiating aperture of HMSIW. The antenna elements can be closely placed using the rotation and orthogonal arrangement for a 2 × 2 array. Small neutralization lines at the center of the MIMO antenna can increase the isolation among its elements by around 10 dB in the lower band and 5 dB in the higher band. A prototype of the MIMO antenna is fabricated and its performance is measured. The measured results show that the resonant frequencies are centered at 4.43 and 5.39 GHz with bandwidths of 110 and 80 MHz and peak gains of 6 and 6.4 dBi, respectively. The minimum isolation in both bands is greater than 35 dB. The envelope correlation coefficient is lower than 0.005 within two operating bands.

UWB MIMO antenna with common radiator

2016 ◽  
Vol 9 (3) ◽  
pp. 573-580 ◽  
Author(s):  
Garima Srivastava ◽  
B. K. Kanuijia ◽  
Rajeev Paulus
Keyword(s):  
Low Cost ◽  
Multiple Input Multiple Output ◽  
Impedance Bandwidth ◽  
Rectangular Slot ◽  
Mimo Antenna ◽  
Circular Patch ◽  
Capacity Loss ◽  
Compact Size ◽  
Multiple Input ◽  
Input Multiple Output

A compact printed 2 × 2 ultrawideband (UWB) multiple input multiple output (MIMO) antenna with a single circular patch as a common radiator for both the antenna elements is presented in this paper. A single circular patch is excited by two tapered CPW feeds for dual polarization. To improve the isolation between two ports, a rectangular slot of dimension L1 × W1 is created in the radiator. The UWB MIMO antenna has impedance bandwidth of 3–12 GHz with a isolation better than 17 dB between the two ports. The envelope correlation coefficient and the capacity loss are evaluated to ensure the good diversity performance of UWB MIMO antenna. The antenna has a compact size of 45 × 45 mm2 and is fabricated on low cost FR4 substrate and measured using Agilent VNA. The simulated and measured results show that the proposed UWB antenna is good candidate for UWB MIMO applications.

A Superwideband Monopole Multiple-Input-Multiple-Output (MIMO) Antenna with Dual Notched (Inverted T-Shaped Stub/U-Shaped Slit) Band Characteristics for Wireless Applications

2019 ◽  
Vol 16 (10) ◽  
pp. 4242-4248
Author(s):  
Manoj Kapil ◽  
Manish Sharma
Keyword(s):  
Ground Plane ◽  
Multiple Input Multiple Output ◽  
Impedance Bandwidth ◽  
Mimo Antenna ◽  
Wireless Applications ◽  
Research Article ◽  
Compact Size ◽  
Multiple Input ◽  
Input Multiple Output ◽  
Microstrip Feed

In this research article, a compact MIMO (Multiple-Input-Multiple-Output) antenna with inclusion of two notched bands characteristics is presented. Designed MIMO antenna consist of dual radiating patches printed on one surface of the substrate which covers measured wide impedance bandwidth of 2.88 GHz–19.98 GHz and satisfies bandwidth ratio more than 10:1 for superwideband with compact size of 18 mm × 34 mm. Two radiating patch are placed symmetrically for MIMO configuration and notched bands to eliminate WiMAX/C and WLAN bands are obtained by attaching inverted T-shaped stub on radiating patch and etched inverted U-shape slit in microstrip feed. Isolation between the two radiating patch is maintained by adding two L-shaped stub in slotted rectangular ground plane. Measured radiation pattern are stable in operating band and offers maximum 4.23 dBi and 89% gain and radiation efficiency respectively. Moreover, antenna shows good diversity performance with Envelope-Correlation-Coefficient (ECC) < 0.5, Directive-Gain (DG) > 9.95 dB and Total-Active-Reflection Coefficient (TARC) < -30 dB.

scholarly journals A Novel 2.4-GHz Low-Profile Smart MIMO Antenna with Reconfigurable Frequency-Selective Reflectors

2020 ◽  
Vol 9 (2) ◽  
pp. 42-51
Author(s):  
C.-H. Tsai ◽  
J.-S. Sun ◽  
S.-J. Chung ◽  
J.-H. Tarng
Keyword(s):  
Multiple Input Multiple Output ◽  
Antenna System ◽  
Switching Network ◽  
Ieee 802.11A ◽  
Mimo Antenna ◽  
Low Profile ◽  
Specific Direction ◽  
Input Multiple Output ◽  
Frequency Selective ◽  
Beam Switching

In this paper, a new low-profile smart multiple-input multiple-output (MIMO) antenna system is presented for WiFi IEEE 802.11a/b/g/n/ac/ax applications. The proposed compact 2.4-GHz antenna system employs two beam-switching antenna cells for MIMO operation. Each antenna cell is composed of four reconfigurable frequency-selective reflectors (RFSRs) and a one-to-four switching feeding network. The RFSRs are constructed using a one-wavelength metal loop resonator, which functions as a radiating antenna or a wave reflector to reflect beams along a specific direction, as controlled by the switching network. The feeding switching network utilizes PIN diodes to adjust the phase and impedance required for changing the operational status of each RFSR. The overall dimensions of the antenna system, including the metallic ground, are 120 mm ´ 120 mm ´ 9.5 mm. Moreover, the measured operational bandwidth of the 2.4-GHz antenna is approximately 100 MHz, and the radiation efficiency of each directed beam is 40%–70%.

scholarly journals Wearable Metamaterial Dual-Polarized High Isolation UWB MIMO Vivaldi Antenna for 5G and Satellite Communications

Micromachines ◽  
2021 ◽  
Vol 12 (12) ◽  
pp. 1559
Author(s):  
Adam R. H. Alhawari ◽  
Tale Saeidi ◽  
Abdulkarem Hussein Mohammed Almawgani ◽  
Ayman Taher Hindi ◽  
Hisham Alghamdi ◽  
...  
Keyword(s):  
Mutual Coupling ◽  
Multiple Input Multiple Output ◽  
Satellite Communications ◽  
Ultra Wideband ◽  
Diversity Gain ◽  
Mimo Antenna ◽  
Antenna Performance ◽  
Low Profile ◽  
Input Multiple Output ◽  
Conductive Textile

A low-profile Multiple Input Multiple Output (MIMO) antenna showing dual polarization, low mutual coupling, and acceptable diversity gain is presented by this paper. The antenna introduces the requirements of fifth generation (5G) and the satellite communications. A horizontally (4.8–31 GHz) and vertically polarized (7.6–37 GHz) modified antipodal Vivaldi antennas are simulated, fabricated, and integrated, and then their characteristics are examined. An ultra-wideband (UWB) at working bandwidths of 3.7–3.85 GHz and 5–40 GHz are achieved. Low mutual coupling of less than −22 dB is achieved after loading the antenna with cross-curves, staircase meander line, and integration of the metamaterial elements. The antennas are designed on a denim textile substrate with = 1.4 and h= 0.5 mm. A conductive textile called ShieldIt is utilized as conductor with conductivity of 1.8 × 104. After optimizing the proposed UWB-MIMO antenna’s characteristics, it is increased to four elements positioned at the four corners of a denim textile substrate to be employed as a UWB-MIMO antenna for handset communications, 5G, Ka and Ku band, and satellite communications (X-band). The proposed eight port UWB-MIMO antenna has a maximum gain of 10.7 dBi, 98% radiation efficiency, less than 0.01 ECC, and acceptable diversity gain. Afterwards, the eight-ports antenna performance is examined on a simulated real voxel hand and chest. Then, it is evaluated and compared on physical hand and chest of body. Evidently, the simulated and measured results show good agreement between them. The proposed UWB-MIMO antenna offers a compact and flexible design, which is suitably wearable for 5G and satellite communications applications.

Four-element pentaband MIMO antenna for multiple wireless application including dual-band circular polarization characteristics

2021 ◽  
pp. 1-12
Author(s):  
Gaurav Saxena ◽  
Y. K. Awasthi ◽  
Priyanka Jain
Keyword(s):  
Near Field ◽  
Multiple Input Multiple Output ◽  
Dual Band ◽  
Location Services ◽  
Mimo Antenna ◽  
Compact Size ◽  
Input Multiple Output ◽  
Polarization Characteristics ◽  
Wireless Application ◽  
Mobile Satellite

Abstract In this article, a meander line-shaped pentaband (2.18–2.24, 2.38–2.46, 2.65–2.70, 3.10–3.32, 3.38–3.46 GHz) four-element multiple-input–multiple-output antenna is presented. The proposed antenna is also circularly polarized in two bands (at 2.2 and 2.4 GHz) with dual-polarization like right-handed at port 1 or 3 and left-handed at port 2 or 4, which is widely used for mobile satellite services (MSS) and Internet of Things applications. This antenna is designed and fabricated with compact size 50 × 70 × 1.6 mm3 on the FR-4 substrate with good diversity performance in pentaband. Simulated results of antenna-like return loss, isolation, and parameters-related diversity have also been tested experimentally in a controlled environment, which is within the permissible limit. The designed antenna will be appropriate for MSS, industrial scientific and medical (ISM), broadband radio services and educational broadband services, WiMAX radio location services, and amateur radio services. Meanwhile, specific absorption rate of the designed antenna has been examined in an empirical environment for the Fresnel radiating near-field applications.

scholarly journals Design and Analysis of Wideband Flexible Self-Isolating MIMO Antennas for Sub-6 GHz 5G and WLAN Smartphone Terminals

Electronics ◽  
2021 ◽  
Vol 10 (23) ◽  
pp. 3031
Author(s):  
Jayshri Kulkarni ◽  
Abdullah G. Alharbi ◽  
Arpan Desai ◽  
Chow-Yen-Desmond Sim ◽  
Ajay Poddar
Keyword(s):  
Common Ground ◽  
High Efficiency ◽  
Multiple Input Multiple Output ◽  
Impedance Bandwidth ◽  
Potential Candidate ◽  
Mimo Antenna ◽  
Mimo Antennas ◽  
Compact Size ◽  
Multiple Input ◽  
Input Multiple Output

A single radiator that is a part of four-port diversity Multiple-Input Multiple-Output (MIMO) antenna design is composed of four octagonal rings embedded between the two opposite sides of a T-shaped conductive layer surrounded by inverted angular edge cut L-shaped and E-shaped structures. The radiators are placed at the four corners with common ground at the center of a smartphone to form a four-element mobile MIMO antenna. The printing of the antenna is carried out on the flexible polyamide substrate (dielectric constant = 3.5 and loss tangent = 0.0027) with dimensions of 70 × 145 × 0.2 mm3. A wide impedance bandwidth of (84.12%) 2.39 to 5.86 GHz is achieved for all four radiators. The compact size of the radiators along with their placement enables the proposed MIMO antenna to occupy much less area while preserving the space for 2G/3G/4G antennas. The placement of the antennas results in self-isolation between antenna elements by achieving isolation greater than 17.5 dB in the desired operating bands. Furthermore, besides showing a high efficiency of 85% and adequate gain above 4 dBi, good diversity performances such as Envelope Correlation Coefficient (ECC) of less than 0.05, Diversity Gain (DG) of above 9.8 dB, Mean Effective Gain (MEG) of −3.1 dB, Channel Capacity of 21.50 bps/Hz, and Total Active Reflection Coefficient (TARC) of below −10 dB are achieved by the flexible MIMO smartphone antenna. The effect of bending along the X and Y-axis on the performance of the proposed MIMO antenna is also analyzed where decent performance is observed. This makes the proposed flexible four-element MIMO antenna a potential candidate to be deployed in future smartphones.

scholarly journals Dual Band Notched UWB MIMO Antenna for Surfaces Penetrating Application

2019 ◽  
Vol 8 (3) ◽  
pp. 6-15
Author(s):  
A. Chaabane ◽  
A. Babouri
Keyword(s):  
Low Cost ◽  
Multiple Input Multiple Output ◽  
Ultra Wideband ◽  
Dual Band ◽  
Mimo Antenna ◽  
Compact Size ◽  
Multiple Input ◽  
Input Multiple Output ◽  
White Portland Cement ◽  
Compact Planar

This paper introduces a novel compact planar Ultra-Wideband (UWB) Multiple-Input-Multiple-Output (MIMO) antenna with dual-band notched performance for Surfaces Penetrating (SP) application. To avoid interference from co-existing systems, two notched bands are introduced by including strips inside the radiating patches. The two ports MIMO antenna is printed on the low-cost FR4 substrate having a compact size of 56×32.47×1.5 mm3. The measured results indicate that the −10 dB bandwidth of the proposed MIMO antenna covers a wide bandwidth from 1.57 GHz to 12.4 GHz (155.05%) with dual-band rejection (2.04 GHz – 3.98 GHz and 4.8 GHz – 6.22 GHz). The effects of numerous construction and decoration surfaces on the antenna’s reflection coefficients are measured. Gypsum, White Portland Cement, Slate, Marble, Wood and Reinforced Concrete were tested. A good penetrating capability is measured which confirms the aptitude of the proposed MIMO antenna to work as SP antenna.

scholarly journals Development of MIMO antenna with decoupling structure for ultra-wideband application

2019 ◽  
Vol 16 (2) ◽  
pp. 818
Author(s):  
Muhammad Aslam Hasin ◽  
M. T. Ali ◽  
Hamizan Yong ◽  
Bazilah Baharom ◽  
Hadi Jumaat
Keyword(s):  
Multiple Input Multiple Output ◽  
Ultra Wideband ◽  
Back Side ◽  
Mimo Antenna ◽  
Mimo Antennas ◽  
Large Bandwidth ◽  
Directional Radiation ◽  
Input Multiple Output ◽  
Four Square ◽  
Uwb Applications

This paper presents the design of adouble-sided Multiple-Input Multiple-Output (MIMO) antenna with a decoupling structure for Ultra-WideBand (UWB) applications. The proposed antenna consists of four square radiating elements printed on FR-4 substrate with partial slotted ground. The substrate consists of two sides and each side are consisting of two slotted partial ground and two square radiator antennas. The elements of the front side are orthogonal to the elements of the back side because it was to increase the isolation of the antenna. The front and back sides of the substrate were also presented with the decoupling structure to avoid the mutual coupling of each antenna. The results of simulated and measured of the proposed UWB MIMO antenna are observed and analyzed. The objective of the UWB MIMO antenna was achieved that large bandwidth of return loss below than -10 dB from 3.3 GHz to 11GHz with an insertion loss lower than -20 dB within the required frequency band. The proposed MIMO antennas exhibits a nearly Omni-directional radiation pattern with average gain value 4.36 dBi.

Sign in / Sign up

Export Citation Format

Share Document