scholarly journals GIS-Based Forest Fire Susceptibility Zonation with IoT Sensor Network Support, Case Study—Nature Park Golija, Serbia

Sensors ◽  
2021 ◽  
Vol 21 (19) ◽  
pp. 6520
Author(s):  
Ivan Novkovic ◽  
Goran B. Markovic ◽  
Djordje Lukic ◽  
Slavoljub Dragicevic ◽  
Marko Milosevic ◽  
...  

The territory of the Republic of Serbia is vulnerable to various natural disasters, among which forest fires stand out. In relation with climate changes, the number of forest fires in Serbia has been increasing from year to year. Protected natural areas are especially endangered by wildfires. For Nature Park Golija, as the second largest in Serbia, with an area of 75,183 ha, and with MaB Reserve Golija-Studenica on part of its territory (53,804 ha), more attention should be paid in terms of forest fire mitigation. GIS and multi-criteria decision analysis are indispensable when it comes to spatial analysis for the purpose of natural disaster risk management. Index-based and fuzzy AHP methods were used, together with TOPSIS method for forest fire susceptibility zonation. Very high and high forest fire susceptibility zone were recorded on 26.85% (Forest Fire Susceptibility Index) and 25.75% (fuzzy AHP). The additional support for forest fire prevention is realized through an additional Internet of Thing (IoT)-based sensor network that enables the continuous collection of local meteorological and environmental data, which enables low-cost and reliable real-time fire risk assessment and detection and the improved long-term and short-term forest fire susceptibility assessment. Obtained results can be applied for adequate forest fire risk management, improvement of the monitoring, and early warning systems in the Republic of Serbia, but are also important for relevant authorities at national, regional, and local level, which will be able to coordinate and intervene in a case of emergency events.

Author(s):  
S. Mariscal ◽  
M. Ríos ◽  
F. Soria

Abstract. Forest fires have negative effects on biodiversity, the atmosphere and human health. The paper presents a spatial risk model as a tool to assess them. Risk areas refer to sectors prone to the spread of fire, in addition to the influence of human activity through remote sensing and multi-criteria analysis. The analysis includes information on land cover, land use, topography (aspect, slope and elevation), climate (temperature and precipitation) and socio-economic factors (proximity to settlements and roads). Weights were assigned to each in order to generate the forest fire risk map. The investigation was carried for a Biological Reserve in Bolivia because of the continuous occurrence of forest fires. Five risk categories for forest fires were derived: very high, high, moderate, low and very low. In summary, results suggest that approximately 67% of the protected area presents a moderate to very high risk; in the latter, populated areas are not dense which reduces the actual risk to the type of events analyzed.


2021 ◽  
Author(s):  

Forest and wildland fires are a natural part of ecosystems worldwide, but large fires in particular can cause societal, economic and ecological disruption. Fires are an important source of greenhouse gases and black carbon that can further amplify and accelerate climate change. In recent years, large forest fires in Sweden demonstrate that the issue should also be considered in other parts of Fennoscandia. This final report of the project “Forest fires in Fennoscandia under changing climate and forest cover (IBA ForestFires)” funded by the Ministry for Foreign Affairs of Finland, synthesises current knowledge of the occurrence, monitoring, modelling and suppression of forest fires in Fennoscandia. The report also focuses on elaborating the role of forest fires as a source of black carbon (BC) emissions over the Arctic and discussing the importance of international collaboration in tackling forest fires. The report explains the factors regulating fire ignition, spread and intensity in Fennoscandian conditions. It highlights that the climate in Fennoscandia is characterised by large inter-annual variability, which is reflected in forest fire risk. Here, the majority of forest fires are caused by human activities such as careless handling of fire and ignitions related to forest harvesting. In addition to weather and climate, fuel characteristics in forests influence fire ignition, intensity and spread. In the report, long-term fire statistics are presented for Finland, Sweden and the Republic of Karelia. The statistics indicate that the amount of annually burnt forest has decreased in Fennoscandia. However, with the exception of recent large fires in Sweden, during the past 25 years the annually burnt area and number of fires have been fairly stable, which is mainly due to effective fire mitigation. Land surface models were used to investigate how climate change and forest management can influence forest fires in the future. The simulations were conducted using different regional climate models and greenhouse gas emission scenarios. Simulations, extending to 2100, indicate that forest fire risk is likely to increase over the coming decades. The report also highlights that globally, forest fires are a significant source of BC in the Arctic, having adverse health effects and further amplifying climate warming. However, simulations made using an atmospheric dispersion model indicate that the impact of forest fires in Fennoscandia on the environment and air quality is relatively minor and highly seasonal. Efficient forest fire mitigation requires the development of forest fire detection tools including satellites and drones, high spatial resolution modelling of fire risk and fire spreading that account for detailed terrain and weather information. Moreover, increasing the general preparedness and operational efficiency of firefighting is highly important. Forest fires are a large challenge requiring multidisciplinary research and close cooperation between the various administrative operators, e.g. rescue services, weather services, forest organisations and forest owners is required at both the national and international level.


2020 ◽  
Vol 10 (22) ◽  
pp. 8213
Author(s):  
Yoojin Kang ◽  
Eunna Jang ◽  
Jungho Im ◽  
Chungeun Kwon ◽  
Sungyong Kim

Forest fires can cause enormous damage, such as deforestation and environmental pollution, even with a single occurrence. It takes a lot of effort and long time to restore areas damaged by wildfires. Therefore, it is crucial to know the forest fire risk of a region to appropriately prepare and respond to such disastrous events. The purpose of this study is to develop an hourly forest fire risk index (HFRI) with 1 km spatial resolution using accessibility, fuel, time, and weather factors based on Catboost machine learning over South Korea. HFRI was calculated through an ensemble model that combined an integrated model using all factors and a meteorological model using weather factors only. To confirm the generalized performance of the proposed model, all forest fires that occurred from 2014 to 2019 were validated using the receiver operating characteristic (ROC) curves and the area under the ROC curve (AUC) values through one-year-out cross-validation. The AUC value of HFRI ensemble model was 0.8434, higher than the meteorological model. HFRI was compared with the modified version of Fine Fuel Moisture Code (FFMC) used in the Canadian Forest Fire Danger Rating Systems and Daily Weather Index (DWI), South Korea’s current forest fire risk index. When compared to DWI and the revised FFMC, HFRI enabled a more spatially detailed and seasonally stable forest fire risk simulation. In addition, the feature contribution to the forest fire risk prediction was analyzed through the Shapley Additive exPlanations (SHAP) value of Catboost. The contributing variables were in the order of relative humidity, elevation, road density, and population density. It was confirmed that the accessibility factors played very important roles in forest fire risk modeling where most forest fires were caused by anthropogenic factors. The interaction between the variables was also examined.


FLORESTA ◽  
2020 ◽  
Vol 50 (4) ◽  
pp. 1818
Author(s):  
Bruna Kovalsyki ◽  
Alexandre França Tetto ◽  
Antonio Carlos Batista ◽  
Nilton José Sousa ◽  
Marta Regina Barrotto do Carmo ◽  
...  

Forest fire hazard and risk mapping is an essential tool for planning and decision making regarding the prevention and suppression of forest fires,as well as fire management in general, as it allows the spatial visualization of areas with higher and lower ignition probability. This study aimed to develop a forest fire risk zoning map for the Vila Velha State Park and its surroundings (Ponta Grossa, Paraná State, Brazil), for the period of higher incidence of forest fires (from April to September) and for the period of lower incidence (from October to March). The following risk and hazard variables were identified: human presence, usage zones, topographical features, soil coverage and land use and meteorological conditions. Coefficients (0 to 5) reflecting the fire risk or hazard degree were allocated to each variable in order to construct the maps. The integration of these maps, through a weighting model, resulted in the final risk mapping. The very high and extreme risk classes represented about 38% of the area for both periods. The forest fire risk mapping spatially represented the levels of fire risk in the area, allowing the managers to identify the priority sectors for preventive actions in both fire seasons.


2021 ◽  
Vol I (I) ◽  
Author(s):  
Priyadharshini S

Forest fires are the most common threat in the woods. A combination of natural and human-made factors contributes to forest fires. Forest fires destroy trees, which are essential to produce oxygen, which we need to live. This new Zigbee-based wireless sensor network is being developed to overcome the limitations of existing technologies like the MODIS satellite-based detection system and a basic wireless sensor network. It's difficult to contain a forest fire that wasn't predicted or noticed in time. As a result, it's critical to catch a wildfire early enough before it spreads too far. Using a GSM device, the proposed method would gather data on forest conditions such as temperature, humidity, smoke, and flames, and deliver it to the appropriate authorities. There are three parts to the project's concept. Modules for sensors, gateways, and control centres make up the three sections. This project's main objective is to benefit others.


2020 ◽  
Author(s):  
Josué Toledo-Castro ◽  
Nayra Rodríguez-Pérez ◽  
Pino Caballero-Gil ◽  
Iván Santos-González ◽  
Candelaria Hernández-Goya ◽  
...  

Abstract The use of wireless sensor networks (WSNs) and the Internet of things to detect forest fire outbreaks may help to reduce the response time and avoid natural disasters. This work proposes the deployment of WSN to enhance the real-time monitoring of dynamic variables such as polluting gases, temperature or the presence of fire flames by infrared. In addition, the activation of forest fire alerts if environmental status may involve evidence of a recent fire outbreak. A fuzzy-based controller is implemented to manage the uncertainty related to estimating forest fire occurrence and dynamic update of fuzzy sets is developed to distinguish usual and unusual environmental conditions of every monitored forest area. Merkle trees, AES and hash functions are considered to protect the integrity of environmental data.


1996 ◽  
Vol 17 (7) ◽  
pp. 1417-1423 ◽  
Author(s):  
F. MASELLI ◽  
A. RODOLFI ◽  
L. BOTTAI ◽  
C. CONESE

Sign in / Sign up

Export Citation Format

Share Document