scholarly journals On the Viability of Video Imaging in Leak Rate Quantification: A Theoretical Error Analysis

Sensors ◽  
2021 ◽  
Vol 21 (17) ◽  
pp. 5683
Author(s):  
Amir Montazeri ◽  
Xiaochi Zhou ◽  
John D. Albertson

Optical gas imaging through multispectral cameras is a promising technique for mitigation of methane emissions through localization and quantification of emissions sources. While more advanced cameras developed in recent years have led to lower uncertainties in measuring gas concentrations, a systematic analysis of the uncertainties associated with leak rate estimation have been overlooked. We present a systematic categorization of the involved uncertainties with a focus on a theoretical analysis of projection uncertainties that are inherent to this technique. The projection uncertainties are then quantified using Large Eddy Simulation experiments of a point source release into the atmosphere. Our results show that while projection uncertainties are typically about 5% of the emission rate, low acquisition times and observation of the gas plume at small distances from the emission source (<10 m) can amount to errors of about 20%. Further, we found that acquisition times on the order of tens of seconds are sufficient to significantly reduce (>50%) the projection uncertainties. These findings suggest robust procedures on how to reduce projection uncertainties, however, a balance between other sources of uncertainty due to operational conditions and the employed instrumentation are required to outline more practical guidelines.

2015 ◽  
Vol 138 (4) ◽  
Author(s):  
Gaelle Mouret ◽  
Nicolas Gourdain ◽  
Lionel Castillon

With the increase in computing power, large eddy simulation (LES) emerges as a promising technique to improve both knowledge of complex physics and reliability of turbomachinery flow predictions. However, these simulations are very expensive for industrial applications, especially when a 360  deg configuration should be considered. The objective of this paper is thus to adapt the well-known phase-lagged conditions to the LES approach by replacing the traditional Fourier series decomposition (FSD) with a compression method that does not make any assumptions on the spectrum of the flow. Several methods are reviewed, and the proper orthogonal decomposition (POD) is retained. This new method is first validated on a flow around a circular cylinder with rotating downstream blocks. The results show significant improvements with respect to the FSD. It is then applied to unsteady Reynolds-averaged Navier–Stokes (URANS) simulations of a single-stage compressor in 2.5D and 3D as a first validation step toward single-passage LES of turbomachinery configuration.


2013 ◽  
Vol 140 (680) ◽  
pp. 855-869 ◽  
Author(s):  
A. A. Hill ◽  
P. R. Field ◽  
K. Furtado ◽  
A. Korolev ◽  
B. J. Shipway

Author(s):  
Eike Tangermann ◽  
Michael Pfitzner

A lean premixed swirl burner configuration has been investigated numerically regarding its vulnerability with respect to flame flashback caused by combustion induced vortex breakdown (CIVB). The flashback phenomenon has been simulated using a simplified quasi two-dimensional URANS method to cover a large range of operational conditions and using Large-Eddy-Simulation to achieve a detailed view of the processes involved. The Lindsted-Vaos turbulent premixed combustion model supplemented with quenching models has been used in URANS simulations. In the LES the combustion has been modeled with a thickened flame model using a one-step reaction mechanism. The isothermal flow and the stable flame were validated and flashback limits for different operational conditions were determined.


Author(s):  
Gaelle Mouret ◽  
Nicolas Gourdain ◽  
Lionel Castillon

With the increase in computing power, large eddy simulation (LES) emerges as a promising technique to improve both knowledge of complex physics and reliability of turbomachinery flow predictions. However these simulations are very expensive for industrial applications, especially when a 360° configuration should be considered. The objective of this paper is thus to improve the well-known phase lagged conditions to the LES approach by replacing the traditional Fourier Series Decomposition (FSD) by a compression method which does not make any assumption on the spectrum of the flow. Several methods are reviewed and the Proper Orthogonal Decomposition (POD) is retained. This new method is first validated on a flow around a circular cylinder with rotating downstream blocks. The results show significant improvements with respect to FSD. It is then applied to URANS simulations of a single stage compressor in 2.5D and 3D as a first validation step toward single-passage LES of turbomachinery configuration.


Sign in / Sign up

Export Citation Format

Share Document