scholarly journals Pelvis-Toe Distance: 3-Dimensional Gait Characteristics of Functional Limb Shortening in Hemiparetic Stroke

Sensors ◽  
2021 ◽  
Vol 21 (16) ◽  
pp. 5417
Author(s):  
Koshiro Haruyama ◽  
Michiyuki Kawakami ◽  
Kohsuke Okada ◽  
Kohei Okuyama ◽  
Keita Tsuzuki ◽  
...  
Keyword(s):  
Gait Speed ◽  
Three Dimensional ◽  
Stroke Patients ◽  
3 Dimensional ◽  
Affected Side ◽  
Gait Quality ◽  
Stroke Group ◽  
Hemiparetic Stroke ◽  
Functional Limb ◽  
Hemiplegic Gait

We aimed to investigate whether a newly defined distance in the lower limb can capture the characteristics of hemiplegic gait compared to healthy controls. Three-dimensional gait analyses were performed on 42 patients with chronic stroke and 10 age-matched controls. Pelvis-toe distance (PTD) was calculated as the absolute distance between an anterior superior iliac spine marker and a toe marker during gait normalized by PTD in the bipedal stance. The shortening peak during the swing phase was then quantified as PTDmin. The sagittal clearance angle, the frontal compensatory angle, gait speed, and the observational gait scale were also collected. PTDmin in the stroke group showed less shortening on the affected side and excessive shortening on the non-affected side compared to controls. PTDmin on the affected side correlated negatively with the sagittal clearance peak angle and positively with the frontal compensatory peak angle in the stroke group. PTDmin in stroke patients showed moderate to high correlations with gait speed and observational gait scale. PTDmin adequately reflected gait quality without being affected by apparent improvements due to frontal compensatory patterns. Our results showed that various impairments and compensations were included in the inability to shorten PTD, which can provide new perspectives on gait rehabilitation in stroke patients.

Three-Dimensional Reconstruction Using Stereo Pairs from Serial Thick Sections

1977 ◽  
Vol 35 ◽  
pp. 562-563
Author(s):  
Robert Glaeser ◽  
Thomas Bauer ◽  
David Grano
Keyword(s):  
Three Dimensional ◽  
Dimensional Structure ◽  
Serial Sections ◽  
Thin Sections ◽  
3 Dimensional ◽  
Transmission Electron ◽  
Freeze Dried ◽  
Dimensional Reconstruction ◽  
Stereo Imagery ◽  
Whole Mounts

In transmission electron microscopy, the 3-dimensional structure of an object is usually obtained in one of two ways. For objects which can be included in one specimen, as for example with elements included in freeze- dried whole mounts and examined with a high voltage microscope, stereo pairs can be obtained which exhibit the 3-D structure of the element. For objects which can not be included in one specimen, the 3-D shape is obtained by reconstruction from serial sections. However, without stereo imagery, only detail which remains constant within the thickness of the section can be used in the reconstruction; consequently, the choice is between a low resolution reconstruction using a few thick sections and a better resolution reconstruction using many thin sections, generally a tedious chore. This paper describes an approach to 3-D reconstruction which uses stereo images of serial thick sections to reconstruct an object including detail which changes within the depth of an individual thick section.

Design and calibration of an IVEM for general 3-dimensional imaging of non-diffracting materials

1992 ◽  
Vol 50 (2) ◽  
pp. 1040-1041
Author(s):  
Neil Rowlands ◽  
Jeff Price ◽  
Michael Kersker ◽  
Seichi Suzuki ◽  
Steve Young ◽  
...  
Keyword(s):  
3D Imaging ◽  
Tomographic Reconstruction ◽  
Three Dimensional ◽  
3 Dimensional ◽  
3D Microstructure ◽  
Image Translation ◽  
Digital Correlation ◽  
On Line ◽  
Mechanical Stage ◽  
Projection Angle

Three-dimensional (3D) microstructure visualization on the electron microscope requires that the sample be tilted to different positions to collect a series of projections. This tilting should be performed rapidly for on-line stereo viewing and precisely for off-line tomographic reconstruction. Usually a projection series is collected using mechanical stage tilt alone. The stereo pairs must be viewed off-line and the 60 to 120 tomographic projections must be aligned with fiduciary markers or digital correlation methods. The delay in viewing stereo pairs and the alignment problems in tomographic reconstruction could be eliminated or improved by tilting the beam if such tilt could be accomplished without image translation.A microscope capable of beam tilt with simultaneous image shift to eliminate tilt-induced translation has been investigated for 3D imaging of thick (1 μm) biologic specimens. By tilting the beam above and through the specimen and bringing it back below the specimen, a brightfield image with a projection angle corresponding to the beam tilt angle can be recorded (Fig. 1a).

scholarly journals Comparative Study of Silk Fibroin-Based Hydrogels and Their Potential as Material for 3-Dimensional (3D) Printing

Molecules ◽  
2021 ◽  
Vol 26 (13) ◽  
pp. 3887
Author(s):  
Watcharapong Pudkon ◽  
Chavee Laomeephol ◽  
Siriporn Damrongsakkul ◽  
Sorada Kanokpanont ◽  
Juthamas Ratanavaraporn
Keyword(s):  
3D Printing ◽  
Silk Fibroin ◽  
Biomedical Applications ◽  
Mechanical Stability ◽  
Three Dimensional ◽  
Structure Stability ◽  
3 Dimensional ◽  
Critical Technology ◽  
Box Structure ◽  
High Degree

Three-dimensional (3D) printing is regarded as a critical technology in material engineering for biomedical applications. From a previous report, silk fibroin (SF) has been used as a biomaterial for tissue engineering due to its biocompatibility, biodegradability, non-toxicity and robust mechanical properties which provide a potential as material for 3D-printing. In this study, SF-based hydrogels with different formulations and SF concentrations (1–3%wt) were prepared by natural gelation (SF/self-gelled), sodium tetradecyl sulfate-induced (SF/STS) and dimyristoyl glycerophosphorylglycerol-induced (SF/DMPG). From the results, 2%wt SF-based (2SF) hydrogels showed suitable properties for extrusion, such as storage modulus, shear-thinning behavior and degree of structure recovery. The 4-layer box structure of all 2SF-based hydrogel formulations could be printed without structural collapse. In addition, the mechanical stability of printed structures after three-step post-treatment was investigated. The printed structure of 2SF/STS and 2SF/DMPG hydrogels exhibited high stability with high degree of structure recovery as 70.4% and 53.7%, respectively, compared to 2SF/self-gelled construct as 38.9%. The 2SF/STS and 2SF/DMPG hydrogels showed a great potential to use as material for 3D-printing due to its rheological properties, printability and structure stability.

Clinical Utility of an Exoskeleton Robot Using 3-Dimensional Scanner Modeling in Burn Patient: A Case Report

2021 ◽  
Author(s):  
So Young Joo ◽  
Seung Yeol Lee ◽  
Yoon Soo Cho ◽  
Sangho Yi ◽  
Cheong Hoon Seo
Keyword(s):  
Burn Injury ◽  
Hand Function ◽  
Three Dimensional ◽  
The Body ◽  
3D Technology ◽  
Early Management ◽  
3 Dimensional ◽  
Exoskeleton Robot ◽  
Physical Abilities ◽  
Upper Limb Dysfunction

Abstract Hands are the part of the body that are most commonly involved in burns, and the main complications are finger joint contractures and nerve injuries. Hypertrophic scarring cannot be avoided despite early management of acute hand burn injuries, and some patients may need application of an exoskeleton robot to restore hand function. To do this, it is essential to individualize the customization of the robot for each patient. Three-dimensional (3D) technology, which is widely used in the field of implants, anatomical models, and tissue fabrication, makes this goal achievable. Therefore, this report is a study on the usefulness of an exoskeleton robot using 3D technology for patients who lost bilateral hand function due to burn injury. Our subject was a 45-year-old man with upper limb dysfunction of 560 days after a flame and chemical burn injury, with resultant impairment of manual physical abilities. After wearing an exoskeleton robot made using 3D printing technology, he could handle objects effectively and satisfactorily. This innovative approach provided considerable advantages in terms of customization of size and reduction in manufacturing time and costs, thereby showing great potential for use in patients with hand dysfunction after burn injury.

scholarly journals The Role of Pre-Clinical 3-Dimensional Models of Osteosarcoma

2020 ◽  
Vol 21 (15) ◽  
pp. 5499
Author(s):  
Hannah L. Smith ◽  
Stephen A. Beers ◽  
Juliet C. Gray ◽  
Janos M. Kanczler
Keyword(s):  
Three Dimensional ◽  
Chorioallantoic Membrane ◽  
3D Models ◽  
In Ovo ◽  
Future Directions ◽  
3 Dimensional ◽  
In Vivo Animal Models

Treatment for osteosarcoma (OS) has been largely unchanged for several decades, with typical therapies being a mixture of chemotherapy and surgery. Although therapeutic targets and products against cancer are being continually developed, only a limited number have proved therapeutically active in OS. Thus, the understanding of the OS microenvironment and its interactions are becoming more important in developing new therapies. Three-dimensional (3D) models are important tools in increasing our understanding of complex mechanisms and interactions, such as in OS. In this review, in vivo animal models, in vitro 3D models and in ovo chorioallantoic membrane (CAM) models, are evaluated and discussed as to their contribution in understanding the progressive nature of OS, and cancer research. We aim to provide insight and prospective future directions into the potential translation of 3D models in OS.

Predicting the oxygen cost of walking in hemiparetic stroke patients

2018 ◽  
Vol 61 (5) ◽  
pp. 309-314 ◽  
Author(s):  
M. Compagnat ◽  
S. Mandigout ◽  
D. Chaparro ◽  
J.Y. Salle ◽  
J.C. Daviet
Keyword(s):  
Oxygen Cost ◽  
Stroke Patients ◽  
Hemiparetic Stroke

272 AEROBIC TRAINING EFFECTS IN HEMIPARETIC STROKE PATIENTS

1994 ◽  
Vol 26 (Supplement) ◽  
pp. S47
Author(s):  
T. G. Tincknell ◽  
K. Potempa ◽  
M. Lopez ◽  
L. T. Braun ◽  
J. P. Szidon ◽  
...  
Keyword(s):  
Aerobic Training ◽  
Stroke Patients ◽  
Training Effects ◽  
Hemiparetic Stroke

The effect of robot-assisted gait training on cortical activation in stroke patients: A functional near-infrared spectroscopy study

2021 ◽  
pp. 1-9
Author(s):  
Kyeong Joo Song ◽  
Min Ho Chun ◽  
Junekyung Lee ◽  
Changmin Lee
Keyword(s):  
Gait Speed ◽  
Functional Outcomes ◽  
Near Infrared ◽  
Gait Training ◽  
Berg Balance Scale ◽  
Cortical Activation ◽  
Control Group ◽  
Stroke Patients ◽  
Robot Assisted ◽  
Functional Near Infrared Spectroscopy

OBJECTIVE: To investigate the effects of the robot–assisted gait training on cortical activation and functional outcomes in stroke patients. METHODS: The patients were randomly assigned: training with Morning Walk® (Morning Walk group; n = 30); conventional physiotherapy (control group; n = 30). Rehabilitation was performed five times a week for 3 weeks. The primary outcome was the cortical activation in the Morning Walk group. The secondary outcomes included gait speed, 10-Meter Walk Test (10MWT), FAC, Motricity Index–Lower (MI–Lower), Modified Barthel Index (MBI), Rivermead Mobility Index (RMI), and Berg Balance Scale (BBS). RESULTS: Thirty-six subjects were analyzed, 18 in the Morning Walk group and 18 in the control group. The cortical activation was lower in affected hemisphere than unaffected hemisphere at the beginning of robot rehabilitation. After training, the affected hemisphere achieved a higher increase in cortical activation than the unaffected hemisphere. Consequently, the cortical activation in affected hemisphere was significantly higher than that in unaffected hemisphere (P = 0.036). FAC, MBI, BBS, and RMI scores significantly improved in both groups. The Morning Walk group had significantly greater improvements than the control group in 10MWT (P = 0.017), gait speed (P = 0.043), BBS (P = 0.010), and MI–Lower (P = 0.047) scores. CONCLUSION: Robot-assisted gait training not only improved functional outcomes but also increased cortical activation in stroke patients.

Micro-Computed Tomography-Based Three-Dimensional Anatomical Structure of the Region Around the Pterygoid Hamulus

2021 ◽  
pp. 105566562110363
Author(s):  
Jiuli Zhao ◽  
Hengyuan Ma ◽  
Yongqian Wang ◽  
Tao Song ◽  
Chanyuan Jiang ◽  
...  
Keyword(s):  
Computed Tomography ◽  
Treatment Options ◽  
Muscle Fibers ◽  
Three Dimensional ◽  
Anatomical Structure ◽  
Micro Computed Tomography ◽  
3 Dimensional ◽  
Middle Ear Ventilation ◽  
Optimal Approach ◽  
Velopharyngeal Function

Objective Palatoplasty would involve the structures around the pterygoid hamulus. However, clinicians hold different opinions on the optimal approach for the muscles and palatine aponeurosis around the pterygoid hamulus. The absence of a consensus regarding this point can be attributed to the lack of investigations on the exact anatomy of this region. Therefore, we used micro-computed tomography to examine the anatomical structure of the region surrounding the pterygoid hamulus. Design Cadaveric specimens were stained with iodine–potassium iodide and scanned by micro-computed tomography to study the structures of the tissues, particularly the muscle fibers. We imported Digital Imaging and Communications in Medicine images to Mimics to reconstruct a 3-dimensional model and simplified the model. Results Three muscles were present around the pterygoid hamulus, namely the palatopharyngeus (PP), superior constrictor (SC), and tensor veli palatini (TVP). The hamulus connects these muscles as a key pivot. The TVP extended to the palatine aponeurosis, which bypassed the pterygoid hamulus, and linked the PP and SC. Some muscle fibers of the SC originated from the hamulus, the aponeurosis of which was wrapped around the hamulus. There was a distinct gap between the pterygoid hamulus and the palatine aponeurosis. This formed a pulley-like structure around the pterygoid hamulus. Conclusions Transection or fracture of the palatine aponeurosis or pterygoid hamulus, respectively, may have detrimental effects on the muscles around the pterygoid hamulus, which play essential roles in the velopharyngeal function and middle ear ventilation. Currently, cleft palate repair has limited treatment options with proven successful outcomes.

Sign in / Sign up

Export Citation Format

Share Document