scholarly journals High-Precision Temperature Inversion Algorithm for Correlative Microwave Radiometer

Sensors ◽  
2021 ◽  
Vol 21 (16) ◽  
pp. 5336
Author(s):  
Jie Liu ◽  
Kai Zhang ◽  
Jingyan Ma ◽  
Qiang Wu ◽  
Zhenlin Sun ◽  
...  
Keyword(s):  
Neural Network ◽  
Brightness Temperature ◽  
Mean Square Error ◽  
High Precision ◽  
Phase Error ◽  
Microwave Radiometer ◽  
Maximum Error ◽  
Temperature Inversion ◽  
Mean Square ◽  
Inversion Algorithm

In order to achieve high precision from non-contact temperature measurement, the hardware structure of a broadband correlative microwave radiometer, calibration algorithm, and temperature inversion algorithm are innovatively designed in this paper. The correlative radiometer is much more sensitive than a full power radiometer, but its accuracy is challenging to improve due to relatively large phase error. In this study, an error correction algorithm is designed, which reduces the phase error from 69.08° to 4.02°. Based on integral calibration on the microwave temperature measuring system with a known radiation source, the linear relationship between the output voltage and the brightness temperature of the object is obtained. Since the metal aluminum plate, antenna, and transmission line will have a non-linear influence on the receiver system, their temperature characteristics and the brightness temperature of the object are used as the inputs of the neural network to obtain a higher accuracy of inversion temperature. The temperature prediction mean square error of a back propagation (BP) neural network is 0.629 °C, and its maximum error is 3.351 °C. This paper innovatively proposed the high-precision PSO-LM-BP temperature inversion algorithm. According to the global search ability of the particle swarm optimization (PSO) algorithm, the initial weight of the network can be determined effectively, and the Levenberg–Marquardt (LM) algorithm makes use of the second derivative information, which has higher convergence accuracy and iteration efficiency. The mean square error of the PSO-LM-BP temperature inversion algorithm is 0.002 °C, and its maximum error is 0.209 °C.

The Analysis of Atmospheric Water Vapor Based on Ground-Based Microwave Radiometer

2012 ◽  
Vol 500 ◽  
pp. 335-340
Author(s):  
Jie Ying He ◽  
Feng Lin Sun ◽  
Sheng Wei Zhang ◽  
Yu Zhang
Keyword(s):  
Neural Network ◽  
Water Vapor ◽  
Root Mean Square Error ◽  
Mean Square Error ◽  
Root Mean Square ◽  
Microwave Radiometer ◽  
Mean Square ◽  
Vapor Density ◽  
China Meteorological Administration ◽  
Density Profiles

The paper introduces a widely used atmospheric absorption models: MPM by Liebe in 1989. Using this absorption model, the paper simulates the temperature and humidity weighting functions and brightness temperature according to the different frequencies and bandwidth of the multi-channel ground-based microwave radiometer. The results show that simulated brightness temperatures are very well agreement with the observation values with an acceptable root mean square error. This paper uses widely used retrieval method of artificial neural network to obtain the water vapor density profiles and calculates the root mean square error of each dataset. Also, to improve the accuracy of retrievals, this paper adopts multi-layers neural network which has two hidden layers. The results show that the retrievals of water vapor density profiles based on ground-based microwave radiometer are agreement with the water vapor density profile which is observed by radiosonde. Grant Nos. GYHY200906035 China Meteorological Administration nonprofit sector (meteorology) special research

Detection of Biomedical Images by Using Bio-inspired Artificial Intelligent

2020 ◽  
Vol 38 (2A) ◽  
pp. 255-264
Author(s):  
Hanan A. R. Akkar ◽  
Sameem A. Salman
Keyword(s):  
Neural Network ◽  
Artificial Neural Network ◽  
Mean Square Error ◽  
Average Rate ◽  
Mean Square ◽  
Performance Measurements ◽  
Artificial Intelligent ◽  
Average Mean Square Error ◽  
Artificial Neural ◽  
Artificial Neural Network Ann

Computer vision and image processing are extremely necessary for medical pictures analysis. During this paper, a method of Bio-inspired Artificial Intelligent (AI) optimization supported by an artificial neural network (ANN) has been widely used to detect pictures of skin carcinoma. A Moth Flame Optimization (MFO) is utilized to educate the artificial neural network (ANN). A different feature is an extract to train the classifier. The comparison has been formed with the projected sample and two Artificial Intelligent optimizations, primarily based on classifier especially with, ANN-ACO (ANN training with Ant Colony Optimization (ACO)) and ANN-PSO (training ANN with Particle Swarm Optimization (PSO)). The results were assessed using a variety of overall performance measurements to measure indicators such as Average Rate of Detection (ARD), Average Mean Square error (AMSTR) obtained from training, Average Mean Square error (AMSTE) obtained for testing the trained network, the Average Effective Processing Time (AEPT) in seconds, and the Average Effective Iteration Number (AEIN). Experimental results clearly show the superiority of the proposed (ANN-MFO) model with different features.

Modelling response of infiltration loss toward water table depth using RBFN, RNN, ANFIS techniques

2021 ◽  
Vol 25 (2) ◽  
pp. 227-234
Author(s):  
Sandeep Samantaray ◽  
Abinash Sahoo
Keyword(s):  
Neural Network ◽  
Mean Square Error ◽  
Water Table ◽  
Environmental Sustainability ◽  
Model Development ◽  
Water Table Depth ◽  
Water Levels ◽  
Coefficient Of Determination ◽  
Mean Square ◽  
Inference System

Accurate prediction of water table depth over long-term in arid agricultural areas are very much important for maintaining environmental sustainability. Because of intricate and diverse hydrogeological features, boundary conditions, and human activities researchers face enormous difficulties for predicting water table depth. A virtual study on forecast of water table depth using various neural networks is employed in this paper. Hybrid neural network approach like Adaptive Neuro Fuzzy Inference System (ANFIS), Recurrent Neural Network (RNN), Radial Basis Function Neural Network (RBFN) is employed here to appraisal water levels as a function of average temperature, precipitation, humidity, evapotranspiration and infiltration loss data. Coefficient of determination (R2), Root mean square error (RMSE), and Mean square error (MSE) are used to evaluate performance of model development. While ANFIS algorithm is used, Gbell function gives best value of performance for model development. Whole outcomes establish that, ANFIS accomplishes finest as related to RNN and RBFN for predicting water table depth in watershed.

scholarly journals Predicting the discharge coefficient of oblique cylindrical weir using neural network techniques

2021 ◽  
Vol 14 (16) ◽  
Author(s):  
Adnan A. Ismael ◽  
Saleh J. Suleiman ◽  
Raid Rafi Omar Al-Nima ◽  
Nadhir Al-Ansari
Keyword(s):  
Neural Network ◽  
Mean Square Error ◽  
Radial Basis Function Network ◽  
Back Propagation ◽  
Back Propagation Neural Network ◽  
Superior Performance ◽  
Mean Square ◽  
The Third ◽  
Testing Stage ◽  
Inclination Angles

AbstractCylindrical weir shapes offer a steady-state overflow pattern, where the type of weirs can offer a simple design and provide the ease-to-pass floating debris. This study considers a coefficient of discharge (Cd) prediction for oblique cylindrical weir using three diameters, the first is of D1 = 0.11 m, the second is of D2 = 0.09 m, and the third is of D3 = 0.06.5 m, and three inclination angles with respect to channel axis, the first is of θ1 = 90 ͦ, the second is of θ2 = 45 ͦ, and the third is of θ3 = 30 ͦ. The Cd values for total of 56 experiments are estimated by using the radial basis function network (RBFN), in addition of comparing that with the back-propagation neural network (BPNN) and cascade-forward neural network (CFNN). Root mean square error (RMSE), mean square error (MSE), and correlation coefficient (CC) statics are used as metrics measurements. The RBFN attained superior performance comparing to the other neural networks of BPNN and CFNN. It is found that, for the training stage, the RBFN network benchmarked very small RMSE and MSE values of 1.35E-12 and 1.83E-24, respectively and for the testing stage, it also could benchmark very small RMSE and MSE values of 0.0082 and 6.80E-05, respectively.

scholarly journals Solar Irradiance Prediction using Neural Model

2018 ◽  
Vol 8 (3) ◽  
Author(s):  
Raj Kumar Yadav ◽  
Nivedita Sethy
Keyword(s):  
Neural Network ◽  
Artificial Neural Network ◽  
Renewable Energy ◽  
Mean Square Error ◽  
Solar Irradiance ◽  
Neural Model ◽  
Accurate Prediction ◽  
Solar Irradiation ◽  
National Renewable Energy Laboratory ◽  
Mean Square

The accurate prediction of solar irradiation has been a leading problem for better energy scheduling approach. Hence in this paper, an Artificial neural network based solar irradiance is proposed for five days duration the data is obtained from National Renewable Energy Laboratory, USA and the simulation were performed using MATLAB 2013. It was found that the neural model was able to predict the solar irradiance with a mean square error of 0.0355.

scholarly journals sEMG-Based Neural Network Prediction Model Selection of Gesture Fatigue and Dataset Optimization

2020 ◽  
Vol 2020 ◽  
pp. 1-17
Author(s):  
Fujun Ma ◽  
Fanghao Song ◽  
Yan Liu ◽  
Jiahui Niu
Keyword(s):  
Neural Network ◽  
Energy Consumption ◽  
Prediction Model ◽  
Mean Square Error ◽  
Short Term Memory ◽  
Experimental Results ◽  
Support Vector ◽  
Mean Square ◽  
Semg Signals ◽  
Research Studies

The fatigue energy consumption of independent gestures can be obtained by calculating the power spectrum of surface electromyography (sEMG) signals. The existing research studies focus on the fatigue of independent gestures, while the research studies on integrated gestures are few. However, the actual gesture operation mode is usually integrated by multiple independent gestures, so the fatigue degree of integrated gestures can be predicted by training neural network of independent gestures. Three natural gestures including browsing information, playing games, and typing are divided into nine independent gestures in this paper, and the predicted model is established and trained by calculating the energy consumption of independent gestures. The artificial neural networks (ANNs) including backpropagation (BP) neural network, recurrent neural network (RNN), and long short-term memory (LSTM) are used to predict the fatigue of gesture. The support vector machine (SVM) is used to assist verification. Mean square error (MSE), root mean square error (RMSE), and mean absolute error (MAE) are utilized to evaluate the optimal prediction model. Furthermore, the different datasets of the processed sEMG signal and its decomposed wavelet coefficients are trained, respectively, and the changes of error functions of them are compared. The experimental results show that LSTM model is more suitable for gesture fatigue prediction. The processed sEMG signals are appropriate for using as the training set the fatigue degree of one-handed gesture. It is better to use wavelet decomposition coefficients as datasets to predict the high-dimensional sEMG signals of two-handed gestures. The experimental results can be applied to predict the fatigue degree of complex human-machine interactive gestures, help to avoid unreasonable gestures, and improve the user’s interactive experience.

Modeling of Phenol Degradation in Spouted Bed Contactor Using Artificial Neural Network (ANN)

2008 ◽  
Vol 3 (2) ◽  
Author(s):  
Madhukar A. Dabhade ◽  
M. B. Saidutta ◽  
D. V. R. Murthy
Keyword(s):  
Neural Network ◽  
Artificial Neural Network ◽  
Mean Square Error ◽  
Model Prediction ◽  
Phenol Degradation ◽  
Mean Square ◽  
Ann Model ◽  
Spouted Bed ◽  
The Mean ◽  
Artificial Neural Network Ann

Presence of phenol and phenolic compounds in various wastewaters and its harmful effects has led to the use of different treatment methods. Work on biological methods shows the use of different microorganisms and different bioreactors so as to improve the removal efficiency economically. The present work deals with the use of N. hydrocarbonoxydans (NCIM 2386), an actinomycetes, for the degradation of phenol. N. hydrocarbonoxydans was immobilized on GAC and used in a spouted bed contactor for effective contact of microorganisms and the substrate. The contactor performance was studied by varying flow rates, influent concentrations and the solids loading in the contactor. The effect of these variables on phenol degradation was investigated and modeling study was carried out using the artificial neural network (ANN). A feed forward neural network with back propagation was used for the model development. The experiments were planned as per the face centered cube design (FCCD) and used for training of the model, whereas data from four other experimental runs were used for testing and validation of the model. The network was optimized for the number of neurons based on the mean square error. The ANN model with three layers with three input neurons, eight neurons in hidden layers and one output neuron was found to predict effectively the effluent concentration for the given operating conditions in the spouted bed contactor. The mean square error was found to be 9.318e-12 for this ANN model. Also the experimental data was used to develop second order nonlinear empirical model obtained using multiple regression (MR) and the results compared with ANN using correlation coefficient (R2), average absolute error (AAE) and root mean square error (RMSE). Results show that R2, AAE and RMSE values of MR model were 0.9363, 2.085 % and 2.338 % respectively, while in case of ANN model these values were 0.9995, 0.59 % and 1.263 % respectively. This shows that ANN model prediction is better than multiple regression model prediction.

scholarly journals The modelling of lead removal from water by deep eutectic solvents functionalized CNTs: artificial neural network (ANN) approach

2017 ◽  
Vol 76 (9) ◽  
pp. 2413-2426 ◽  
Author(s):  
Seef Saadi Fiyadh ◽  
Mohammed Abdulhakim AlSaadi ◽  
Mohamed Khalid AlOmar ◽  
Sabah Saadi Fayaed ◽  
Ako R. Hama ◽  
...  
Keyword(s):  
Neural Network ◽  
Artificial Neural Network ◽  
Root Mean Square Error ◽  
Mean Square Error ◽  
Back Propagation ◽  
Deep Eutectic Solvents ◽  
Lead Removal ◽  
Mean Square ◽  
Feed Forward Back Propagation ◽  
Artificial Neural Network Ann

Abstract The main challenge in the lead removal simulation is the behaviour of non-linearity relationships between the process parameters. The conventional modelling technique usually deals with this problem by a linear method. The substitute modelling technique is an artificial neural network (ANN) system, and it is selected to reflect the non-linearity in the interaction among the variables in the function. Herein, synthesized deep eutectic solvents were used as a functionalized agent with carbon nanotubes as adsorbents of Pb2+. Different parameters were used in the adsorption study including pH (2.7 to 7), adsorbent dosage (5 to 20 mg), contact time (3 to 900 min) and Pb2+ initial concentration (3 to 60 mg/l). The number of experimental trials to feed and train the system was 158 runs conveyed in laboratory scale. Two ANN types were designed in this work, the feed-forward back-propagation and layer recurrent; both methods are compared based on their predictive proficiency in terms of the mean square error (MSE), root mean square error, relative root mean square error, mean absolute percentage error and determination coefficient (R2) based on the testing dataset. The ANN model of lead removal was subjected to accuracy determination and the results showed R2 of 0.9956 with MSE of 1.66 × 10−4. The maximum relative error is 14.93% for the feed-forward back-propagation neural network model.

scholarly journals Artificial neural network models for reservoir-aquifer dimensionless variables: influx and pressure prediction for water influx calculation

2021 ◽  
Vol 11 (4) ◽  
pp. 1885-1904
Author(s):  
Anietie Ndarake Okon ◽  
Idongesit Bassey Ansa
Keyword(s):  
Neural Network ◽  
Artificial Neural Network ◽  
Mean Square Error ◽  
Bottom Water ◽  
Mean Square ◽  
Petroleum Reservoir ◽  
Statistical Measures ◽  
Water Influx ◽  
Ann Models ◽  
Artificial Neural

AbstractCalculation of water influx into petroleum reservoir is a tedious evaluation with significant reservoir engineering applications. The classical approach developed by van Everdingen–Hurst (vEH) based on diffusivity equation solution had been the fulcrum for water influx calculation in both finite and infinite-acting aquifers. The vEH model for edge-water drive reservoirs was modified by Allard and Chen for bottom-water drive reservoirs. Regrettably, these models solution variables: dimensionless influx ($$W_{{{\text{eD}}}}$$ W eD ) and dimensionless pressure ($$P_{D}$$ P D ) were presented in tabular form. In most cases, table look-up and interpolation between time entries are necessary to determine these variables, which makes the vEH approach tedious for water influx estimation. In this study, artificial neural network (ANN) models to predict the reservoir-aquifer variables $$W_{{{\text{eD}}}}$$ W eD and $$P_{D}$$ P D was developed based on the vEH datasets for the edge- and bottom-water finite and infinite-acting aquifers. The overall performance of the developed ANN models correlation coefficients (R) was 0.99983 and 0.99978 for the edge- and bottom-water finite aquifer, while edge- and bottom-water infinite-acting aquifer was 0.99992 and 0.99997, respectively. With new datasets, the generalization capacities of the developed models were evaluated using statistical tools: coefficient of determination (R2), R, mean square error (MSE), root-mean-square error (RMSE) and absolute average relative error (AARE). Comparing the developed finite aquifer models predicted $$W_{{{\text{eD}}}}$$ W eD with Lagrangian interpolation approach resulted in R2, R, MSE, RMSE and AARE of 0.9984, 0.9992, 0.3496, 0.5913 and 0.2414 for edge-water drive and 0.9993, 0.9996, 0.1863, 0.4316 and 0.2215 for bottom-water drive. Also, infinite-acting aquifer models (Model-1) resulted in R2, R, MSE, RMSE and AARE of 0.9999, 0.9999, 0.5447, 0.7380 and 0.2329 for edge-water drive, while bottom-water drive had 0.9999, 0.9999, 0.2299, 0.4795 and 0.1282. Again, the edge-water infinite-acting model predicted $$W_{{{\text{eD}}}}$$ W eD and Edwardson et al. polynomial estimated $$W_{eD}$$ W eD resulted in the R2 value of 0.9996, R of 0.9998, MSE of 4.740 × 10–4, RMSE of 0.0218 and AARE of 0.0147. Furthermore, the developed ANN models generalization performance was compared with some models for estimating $$P_{D}$$ P D . The results obtained for finite aquifer model showed the statistical measures: R2, R, MSE, RMSE and AARE of 0.9985, 0.9993, 0.0125, 0.1117 and 0.0678 with Chatas model and 0.9863, 0.9931, 0.1411, 0.3756 and 0.2310 with Fanchi equation. The infinite-acting aquifer model had 0.9999, 0.9999, 0.1750, 0.0133 and 7.333 × 10–3 with Edwardson et al. polynomial, then 0.9865, 09,933, 0.0143, 0.1194 and 0.0831 with Lee model and 0.9991, 0.9996, 1.079 × 10–3, 0.0328 and 0.0282 with Fanchi model. Therefore, the developed ANN models can predict $$W_{{{\text{eD}}}}$$ W eD and $$P_{D}$$ P D for the various aquifer sizes provided by vEH datasets for water influx calculation.

Sign in / Sign up

Export Citation Format

Share Document