scholarly journals MIRRA: A Modular and Cost-Effective Microclimate Monitoring System for Real-Time Remote Applications

Sensors ◽  
2021 ◽  
Vol 21 (13) ◽  
pp. 4615
Author(s):  
Olivier Pieters ◽  
Emiel Deprost ◽  
Jonas Van Der Donckt ◽  
Lore Brosens ◽  
Pieter Sanczuk ◽  
...  
Keyword(s):  
Climate Change ◽  
Real Time ◽  
Monitoring System ◽  
Low Cost ◽  
Cost Effective ◽  
Time Data ◽  
Real Time Data ◽  
Microclimate Monitoring ◽  
Weather Stations

Monitoring climate change, and its impacts on ecological, agricultural, and other societal systems, is often based on temperature data derived from official weather stations. Yet, these data do not capture most microclimates, influenced by soil, vegetation and topography, operating at spatial scales relevant to the majority of organisms on Earth. Detecting and attributing climate change impacts with confidence and certainty will only be possible by a better quantification of temperature changes in forests, croplands, mountains, shrublands, and other remote habitats. There is an urgent need for a novel, miniature and simple device filling the gap between low-cost devices with manual data download (no instantaneous data) and high-end, expensive weather stations with real-time data access. Here, we develop an integrative real-time monitoring system for microclimate measurements: MIRRA (Microclimate Instrument for Real-time Remote Applications) to tackle this problem. The goal of this platform is the design of a miniature and simple instrument for near instantaneous, long-term and remote measurements of microclimates. To that end, we optimised power consumption and transfer data using a cellular uplink. MIRRA is modular, enabling the use of different sensors (e.g., air and soil temperature, soil moisture and radiation) depending upon the application, and uses an innovative node system highly suitable for remote locations. Data from separate sensor modules are wirelessly sent to a gateway, thus avoiding the drawbacks of cables. With this sensor technology for the long-term, low-cost, real-time and remote sensing of microclimates, we lay the foundation and open a wide range of possibilities to map microclimates in different ecosystems, feeding a next generation of models. MIRRA is, however, not limited to microclimate monitoring thanks to its modular and wireless design. Within limits, it is suitable or any application requiring real-time data logging of power-efficient sensors over long periods of time. We compare the performance of this system to a reference system in real-world conditions in the field, indicating excellent correlation with data collected by established data loggers. This proof-of-concept forms an important foundation to creating the next version of MIRRA, fit for large scale deployment and possible commercialisation. In conclusion, we developed a novel wireless cost-effective sensor system for microclimates.

Intensifiers on Tyneside

2010 ◽  
Vol 31 (3) ◽  
pp. 252-287 ◽  
Author(s):  
Katie Barnfield ◽  
Isabelle Buchstaller
Keyword(s):  
Real Time ◽  
Longitudinal Analysis ◽  
Developmental Trajectories ◽  
Time Data ◽  
Longitudinal Changes ◽  
Real Time Data ◽  
Quantitative Development ◽  
First Time

We report on longitudinal changes in the system of intensification in an innovative corpus that spans five decades of dialectal speech. Our analyses allow us — for the first time in a British context — to trace the quantitative development in the variable across four generations. Longitudinal analysis across real and apparent time determines the effect of extralinguistic and intralinguistic variables on intensification in Tyneside and tests to what extent real time data corroborates trends reported from previous apparent time analyses. Long-term competition within the variable manifests itself in distinctive developmental trajectories: expansion — both proportionally within the variable as well as across adjectival categories — tends to follow one of three types of patterns, exemplified, respectively, by really, so and dead. Variant retraction, however, follows only one schema. Importantly, numerical decline in the system does not necessarily go hand in hand with a reduction in breadth of application.

scholarly journals Smart carbon monitoring platform under IoT-Cloud architecture for small cities in B5G

2021 ◽  
Author(s):  
He Zhang ◽  
Jianxun Zhang ◽  
Rui Wang ◽  
Yazhe Huang ◽  
Mengxiao Zhang ◽  
...  
Keyword(s):  
Real Time ◽  
Carbon Emission ◽  
Emission Measurement ◽  
Low Carbon ◽  
Time Data ◽  
Small Cities ◽  
Real Time Data ◽  
Monitoring Platform ◽  
Term Data

AbstractWith the rapid development of the Internet of Things (IoT) in the 5G age, the construction of smart cities around the world consequents on the exploration of carbon reduction path based on IoT technology is an important direction for global low carbon city research. Carbon dioxide emissions in small cities are usually higher than that in large and medium cities. However, due to the huge difference in data environment between small cities and Medium-large sized cities, the weak hardware foundation of the IoT, and the high input cost, the construction of a small city smart carbon monitoring platform has not yet been carried out. This paper proposes a real-time estimate model of carbon emissions at the block and street scale and designs a smart carbon monitoring platform that combines traditional carbon control methods with IoT technology. It can exist long-term data by using real-time data acquired with the sensing device. Therefore, the dynamic monitoring and management of low-carbon development in small cities can be achieved. The contributions are summarized as follows: (1) Intelligent thermoelectric systems, industrial energy monitoring systems, and intelligent transportation systems are three core systems of the monitoring platform. Carbon emission measurement methods based on sample monitoring, long-term data, and real-time data have been established, they can solve the problem of the high cost of IoT equipment in small cities. (2) Combined with long-term data, the real-time correction technology, they can dispose of the matter of differences in carbon emission measurement under diverse scales.

scholarly journals Design of an IoT based Real Time Environment Monitoring System using Legacy Sensors

2018 ◽  
Vol 210 ◽  
pp. 03008
Author(s):  
Aparajita Das ◽  
Manash Pratim Sarma ◽  
Kandarpa Kumar Sarma ◽  
Nikos Mastorakis
Keyword(s):  
Air Pollution ◽  
Light Intensity ◽  
Real Time ◽  
Environmental Conditions ◽  
Low Cost ◽  
Environment Monitoring ◽  
Time Data ◽  
Graphical Information ◽  
Real Time Data ◽  
Sun Light

This paper describes the design of an operative prototype based on Internet of Things (IoT) concepts for real time monitoring of various environmental conditions using certain commonly available and low cost sensors. The various environmental conditions such as temperature, humidity, air pollution, sun light intensity and rain are continuously monitored, processed and controlled by an Arduino Uno microcontroller board with the help of several sensors. Captured data are broadcasted through internet with an ESP8266 Wi-Fi module. The projected system delivers sensors data to an API called ThingSpeak over an HTTP protocol and allows storing of data. The proposed system works well and it shows reliability. The prototype has been used to monitor and analyse real time data using graphical information of the environment.

scholarly journals An IoT based Real-time Data-centric Monitoring System for Vaccine Cold Chain

2020 ◽  
Author(s):  
Raisa Tahseen Hasanat ◽  
MD. Arifur Rahman ◽  
Nafees Mansoor ◽  
Nabeel Mohammed ◽  
Mohammad Shahriar Rahman ◽  
...  
Keyword(s):  
Real Time ◽  
Monitoring System ◽  
Cold Chain ◽  
Time Data ◽  
Real Time Data

LZER0: GNSS cost-effective real-time positioning applied to landslide monitoring

2020 ◽  
Author(s):  
Lavinia Tunini ◽  
David Zuliani ◽  
Paolo Fabris ◽  
Marco Severin
Keyword(s):  
Real Time ◽  
Monitoring System ◽  
Low Cost ◽  
Cost Effective ◽  
Single Frequency ◽  
Landslide Monitoring ◽  
Natural Risk ◽  
Near Surface ◽  
Landslide Event ◽  
Wide Range

<p>The Global Navigation Satellite Systems (GNSS) provide a globally extended dataset of primordial importance for a wide range of applications, such as crustal deformation, topographic measurements, or near surface processes studies. However, the high costs of GNSS receivers and the supporting software can represent a strong limitation for the applicability to landslide monitoring. Low-cost tools and techniques are strongly required to face the plausible risk of losing the equipment during a landslide event.</p><p>Centro di Ricerche Sismologiche (CRS) of Istituto Nazionale di Oceanografia e di Geofisica Sperimentale OGS in collaboration with SoluTOP, in the last years, has developed a cost-effective GNSS device, called LZER0, both for post-processing and real-time applications. The aim is to satisfy the needs of both scientific and professional communities which require low-cost equipment to increase and improve the measurements on structures at risk, such as landslides or buildings, without losing precision.</p><p>The landslide monitoring system implements single-frequency GNSS devices and open source software packages for GNSS positioning, dialoguing through Linux shell scripts. Furthermore a front-end web page has been developed to show real-time tracks. The system allows measuring real-time surface displacements with a centimetre precision and with a cost ten times minor than a standard RTK GPS operational system.</p><p>This monitoring system has been tested and now applied to two landslides in NE- Italy: one near Tolmezzo municipality and one near Brugnera village. Part of the device development has been included inside the project CLARA 'CLoud plAtform and smart underground imaging for natural Risk Assessment' funded by the Italian Ministry of Education, University and Research (MIUR).</p>

scholarly journals LOW COST DATABASE DESIGN FOR 3D VIEWING AND ACCESS

2011 ◽  
Author(s):  
Kambiz Farahmand
Keyword(s):  
Real Time ◽  
Low Cost ◽  
Visual Basic ◽  
Parametric Modeling ◽  
Shop Floor ◽  
Time Data ◽  
Microsoft Access ◽  
Technical Manual ◽  
Real Time Data ◽  
Modeling Software

Using the popular desktop software, Microsoft Access and Visual Basic coding, a database inventory was designed for a helicopter maintenance plant. This design aims to provide the managers and maintenance engineers a reliable tool to view the inventory list in its shops. This design model uses real time data from the shop floor and the data provided in the Blackhawk Technical Manual for Army operations. This project provides integration between Pro/ENGINEER and Microsoft Access. Microsoft Access is a desktop database application which is inexpensive and available readily. PTC© Pro/ENGINEER is interactive, powerful parametric modeling software for 3D viewing and modeling. In effect, this design aims to provide the managers with a better understanding and quick access to inventory list of the shop floor and as such better utilization of all the available resources.

Sign in / Sign up

Export Citation Format

Share Document