scholarly journals Examples of the Use of the ARAMIS 3D Measurement System for the Susceptibility to Deformation Tests for the Selected Mixtures of Coal Mining Wastes

Sensors ◽  
2021 ◽  
Vol 21 (13) ◽  
pp. 4600
Author(s):  
Konrad Walotek ◽  
Joanna Bzówka ◽  
Adrian Ciołczyk
Keyword(s):  
Coal Mining ◽  
Cyclic Load ◽  
Measurement Tool ◽  
3D Measurement ◽  
Test Results ◽  
Measurement Systems ◽  
Deformation Tests ◽  
3D Measurement System ◽  
Detailed Determination

This paper presents the ARAMIS 3D system and examples of deformation susceptibility test results made on mixtures of coal mining waste and recycled tire rubber bound with the use of hydraulic binders. The ARAMIS 3D system is a measurement tool based on 3D scanning of the surface of the tested material. On the basis of the obtained 3D video image, the system allows for the continuous observation of the displacements occurring on the surface of the tested object during its load. This allows for a very detailed determination of the deformation distribution during the material loading. These types of measurement systems can be very useful, especially in the case of testing composite materials and testing materials under cyclic load conditions.

Evolution of Microclimatic Conditions in Paskov Mine / Ewolucja Warunków Mikroklimatycznych W Kopalni Paskov

2012 ◽  
Vol 57 (4) ◽  
pp. 1045-1055
Author(s):  
Pavel Zapletal ◽  
Pavel Prokop ◽  
Vítězslav Košňovský
Keyword(s):  
Coal Mining ◽  
Mining Activity ◽  
Mining Engineering ◽  
Special Program ◽  
Main Subject ◽  
Coal Basin ◽  
Research Activities ◽  
Microclimatic Conditions ◽  
Technical University

Abstract The main subject of this paper focuses on scientific and research activities conducted in the Institute of Mining Engineering and Safety of the VŠB-Technical University of Ostrava. Cooperation between the VŠB-Technical University of Ostrava and OKD A.S., the only representative of coal mining in the Ostrava-Karviná coal basin, has recently begun to develop again. This paper describes an example discussed in a certain study, which has been undertaken for the Paskov mine, OKD a.s., dealing specifically with the evolution of microclimate parameters in mines that depend on the progress of mining activity at deeper levels over a period of several years. To this end, a special program, aimed at determination of the necessary refrigerating capacity, was established at the VŠB-Technical University of Ostrava.

scholarly journals Interaction Boundary Determination of Renewable Energy Sources to Estimate System Strength Using the Power Flow Tracing Strategy

2021 ◽  
Vol 13 (3) ◽  
pp. 1569
Author(s):  
Namki Choi ◽  
Byongjun Lee ◽  
Dohyuk Kim ◽  
Suchul Nam
Keyword(s):  
Renewable Energy ◽  
Power Flow ◽  
Renewable Energy Sources ◽  
Energy Sources ◽  
Test Results ◽  
Boundary Determination ◽  
Actual Interaction ◽  
Power Flow Tracing ◽  
Estimate System

System strength is an important concept in the integration of renewable energy sources (RESs). However, evaluating system strength is becoming more ambiguous due to the interaction of RESs. This paper proposes a novel scheme to define the actual interaction boundaries of RESs using the power flow tracing strategy. Based on the proposed method, the interaction boundaries of RESs were identified at the southwest side of Korea Electric Power Corporation (KEPCO) systems. The test results show that the proposed approach always provides the identical interaction boundaries of RESs in KEPCO systems, compared to the Electric Reliability Council of Texas (ERCOT) method. The consistent boundaries could be a guideline for power-system planners to assess more accurate system strength, considering the actual interactions of the RESs.

High Strength Combined Support Technology in Deep High Stress Soft Rock Roadway

2012 ◽  
Vol 524-527 ◽  
pp. 598-603
Author(s):  
Nian Jie Ma ◽  
Zhi Qiang Zhao ◽  
Hua Zhao ◽  
Li Shuai Jiang
Keyword(s):  
High Stress ◽  
Soft Rock ◽  
High Strength ◽  
Parameter Determination ◽  
Test Results ◽  
Actual Measurement ◽  
Computer Numerical Simulation ◽  
Soft Rock Roadway ◽  
Rock Roadway

In order to solve the serious damage and repeat revision problem of high stress soft rock roadway in deep -950 level of Tangshan coal mine, based on the theory of the maximum stress level, together with the actual measurement of geostress and the laboratory mechanical parameters of rock-core and computer numerical simulation, the high strength combined support technology and supporting parameters are determined and the engineering test has been done. The engineering test results show that the parameter determination of high strength combined support technology, which based on the actual measurement of geostress, can effective solve the support issue of high stress soft rock roadway and provide useful experience for similar engineering problems.

Experimental and Theoretical Rotordynamic Characteristics of a Hybrid Journal Bearing

1997 ◽  
Vol 119 (1) ◽  
pp. 132-141 ◽  
Author(s):  
J. T. Sawicki ◽  
R. J. Capaldi ◽  
M. L. Adams
Keyword(s):  
Journal Bearing ◽  
Operating Conditions ◽  
Dynamic Force ◽  
Test Results ◽  
Force Measurements ◽  
Lubrication Equation ◽  
Load Cells ◽  
Theoretical Predictions ◽  
Stiffness And Damping

This paper describes an experimental and theoretical investigation of a four-pocket, oil-fed, orifice-compensated hydrostatic bearing including the hybrid effects of journal rotation. The test apparatus incorporates a double-spool-shaft spindle which permits independent control over the journal spin speed and the frequency of an adjustable-magnitude circular orbit, for both forward and backward whirling. This configuration yields data that enables determination of the full linear anisotropic rotordynamic model. The dynamic force measurements were made simultaneously with two independent systems, one with piezoelectric load cells and the other with strain gage load cells. Theoretical predictions are made for the same configuration and operating conditions as the test matrix using a finite-difference solver of Reynolds lubrication equation. The computational results agree well with test results, theoretical predictions of stiffness and damping coefficients are typically within thirty percent of the experimental results.

scholarly journals A Method to Measure the Fuel Distribution and the Fuel Captured by V–Gutter Flameholder in High Speed Airstream

1985 ◽  
Author(s):  
Gu Shan-Jian ◽  
Yang Mao-Lin ◽  
Li Xiang-Yi
Keyword(s):  
Flow Rate ◽  
Experimental Error ◽  
High Speed ◽  
Fuel Flow Rate ◽  
Fuel Distribution ◽  
Fuel Flow ◽  
Sampling Condition ◽  
Detailed Determination

A method to measure the fuel distribution and the percentage of fuel flow rate captured by a V-gutter flameholder in a high speed airstream has been developed. The effects of configuration and size of the probe and temprature of the sample mixture in the probe on measurement have been investigated. The detailed determination of isokinetic sampling condition is described. The effects of V-gutter geometry on flowfield have been considered. The total experimental error is of the order ±5%.

Sign in / Sign up

Export Citation Format

Share Document