scholarly journals Smartphone Positioning and Accuracy Analysis Based on Real-Time Regional Ionospheric Correction Model

Sensors ◽  
2021 ◽  
Vol 21 (11) ◽  
pp. 3879
Author(s):  
Qi Liu ◽  
Chengfa Gao ◽  
Zihan Peng ◽  
Ruicheng Zhang ◽  
Rui Shang
Keyword(s):  
Real Time ◽  
Convergence Time ◽  
Electron Content ◽  
Ionospheric Model ◽  
Positioning Accuracy ◽  
Correction Model ◽  
The Real ◽  
Gnss Positioning ◽  
Klobuchar Model ◽  
Regional Ionospheric Model

As one of the main errors that affects Global Navigation Satellite System (GNSS) positioning accuracy, ionospheric delay also affects the improvement of smartphone positioning accuracy. The current ionospheric error correction model used in smartphones has a certain time delay and low accuracy, which is difficult to meet the needs of real-time positioning of smartphones. This article proposes a method to use the real-time regional ionospheric model retrieved from the regional Continuously Operating Reference Stations (CORS) observation data to correct the GNSS positioning error of the smartphone. To verify the accuracy of the model, using the posterior grid as the standard, the electron content error of the regional ionospheric model is less than 5 Total Electron Content Unit (TECU), which is about 50% higher than the Klobuchar model, and to further evaluate the impact of the regional ionosphere model on the real-time positioning accuracy of smartphones, carrier-smoothing pseudorange and single-frequency Precise Point Positioning (PPP) tests were carried out. The results show that the real-time regional ionospheric model can significantly improve the positioning accuracy of smartphones, especially in the elevation direction. Compared with the Klobuchar model, the improvement effect is more than 34%, and the real-time regional ionospheric model also shortens the convergence time of the elevation direction to 1 min. (The convergence condition is that the range of continuous 20 s is less than 0.5 m).

scholarly journals An Enhanced Real-Time Regional Ionospheric Model Using IGS Real-Time Service (IGS-RTS) Products

2015 ◽  
Vol 69 (3) ◽  
pp. 521-530 ◽  
Author(s):  
Mohamed Abdelazeem ◽  
Rahmi N. Çelik ◽  
Ahmed El-Rabbany
Keyword(s):  
Real Time ◽  
Convergence Time ◽  
Single Frequency ◽  
High Solar Activity ◽  
Satellite Orbits ◽  
Electron Content ◽  
Ionospheric Model ◽  
Time Service ◽  
The Real ◽  
Regional Ionospheric Model

Recently, the International Global Navigation Satellite System (GNSS) Service (IGS) has launched the Real-Time Service (IGS-RTS). The RTS products enable real-time precise positioning applications. For single-frequency Real-Time Precise Point Positioning (RT-PPP), ionospheric delay mitigation is a major challenge. To overcome this challenge, we developed a Real-Time Regional Ionospheric Model (RT-RIM) over Europe using the RTS satellite orbits and clock products. The model has spatial and temporal resolution of 1° × 1° and 15 minutes, respectively. Global Positioning System (GPS) observations from 60 IGS and EUREF reference stations are processed using the Bernese 5·2 PPP module in order to extract the Real-Time Vertical Electron Content (RT-VTEC). The PPP convergence time and positioning accuracy using the RTS products is estimated and compared with dual frequency PPP and single-frequency PPP obtained through the combined rapid IGS Global Ionospheric Maps (IGS-GIM) over three consecutive days under high solar activity and one of them under active geomagnetic activity. The results show that the proposed model improves PPP accuracy and convergence time under the mid-latitude region about 40%, 55% and 40% for the horizontal, height and three-dimensional (3D) components respectively in comparison with the IGS-GIM.

scholarly journals The cooperative IGS RT-GIMs: a global and accurate estimation of the ionospheric electron content distribution in real-time

2021 ◽  
Author(s):  
Qi Liu ◽  
Manuel Hernández-Pajares ◽  
Heng Yang ◽  
Enric Monte-Moreno ◽  
David Roma-Dollase ◽  
...  
Keyword(s):  
Real Time ◽  
Geomagnetic Storms ◽  
Quality Data ◽  
Accurate Estimation ◽  
Electron Content ◽  
Vertical Total Electron Content ◽  
Total Electron ◽  
The Real ◽  
Gnss Positioning ◽  
Testing Period

Abstract. The Real-Time Working Group (RTWG) of the International GNSS Service (IGS) is dedicated to providing high-quality data, high-accuracy products for Global Navigation Satellite System (GNSS) positioning, navigation, timing, and Earth observations. As one part of real-time products, the IGS combined Real-Time Global Ionosphere Map (RT-GIM) has been generated by the real-time weighting of the RT-GIMs from IGS real-time ionosphere centers including the Chinese Academy of Sciences (CAS), Centre National d’Etudes Spatiales (CNES), Universitat Politècnica de Catalunya (UPC), and Wuhan University (WHU). The performance of global Vertical Total Electron Content (VTEC) representation in all of the RT-GIMs has been assessed by VTEC from Jason3-altimeter during one month over oceans and dSTEC-GPS technique with 2-day observations over continental regions. According to the Jason3-VTEC and dSTEC-GPS assessment, the real-time weighting technique is sensitive to the accuracy of RT-GIMs. Compared with the performance of post-processed rapid Global Ionosphere Maps (GIMs) and IGS combined final GIM (igsg) during the testing period, the accuracy of UPC RT-GIM (after the transition of interpolation technique) and IGS combined RT-GIM (IRTG) is equivalent to the rapid GIMs and reaches around 2.7 and 3.0 TECU (TEC Unit, 1016 el/m2) over oceans and continental regions, respectively. The accuracy of CAS RT-GIM and CNES RT-GIM is slightly worse than the rapid GIMs, while WHU RT-GIM requires a further upgrade to obtain similar performance. In addition, the strong response to the recent geomagnetic storms has been found in the Global Electron Content (GEC) of IGS RT-GIMs (especially UPC RT-GIM and IGS combined RT-GIM). The IGS RT-GIMs turn out to be reliable sources of real-time global VTEC information and have great potential for real-time applications including range error correction for transionospheric radio signals (such as GNSS positioning, search and rescue, air traffic, radar altimetry, and radioastronomy), the monitoring of space weather (such as geomagnetic and ionospheric storms, ionospheric disturbance) and detection of natural hazards on a global scale (such as hurricanes/typhoons, ionospheric anomalies associated with earthquakes). All the IGS combined RT-GIMs generated and analyzed during the testing period are available at http://doi.org/10.5281/zenodo.4651445 (Liu et al., 2021b).

An accurate Kriging-based regional ionospheric model using combined GPS/BeiDou observations

2018 ◽  
Vol 12 (1) ◽  
pp. 65-76 ◽  
Author(s):  
Mohamed Abdelazeem ◽  
Rahmi N. Çelik ◽  
Ahmed El-Rabbany
Keyword(s):  
Convergence Time ◽  
Single Frequency ◽  
Kriging Interpolation ◽  
Time Interval ◽  
Electron Content ◽  
Vertical Total Electron Content ◽  
Ionospheric Model ◽  
Total Electron ◽  
Kriging Interpolation Method ◽  
Regional Ionospheric Model

AbstractIn this study, we propose a regional ionospheric model (RIM) based on both of the GPS-only and the combined GPS/BeiDou observations for single-frequency precise point positioning (SF-PPP) users in Europe. GPS/BeiDou observations from 16 reference stations are processed in the zero-difference mode. A least-squares algorithm is developed to determine the vertical total electron content (VTEC) bi-linear function parameters for a 15-minute time interval. The Kriging interpolation method is used to estimate the VTEC values at a 1 ° × 1 ° grid. The resulting RIMs are validated for PPP applications using GNSS observations from another set of stations. The SF-PPP accuracy and convergence time obtained through the proposed RIMs are computed and compared with those obtained through the international GNSS service global ionospheric maps (IGS-GIM). The results show that the RIMs speed up the convergence time and enhance the overall positioning accuracy in comparison with the IGS-GIM model, particularly the combined GPS/BeiDou-based model.

scholarly journals Precise Point Positioning with Almost Fully Deployed BDS-3, BDS-2, GPS, GLONASS, Galileo and QZSS Using Precise Products from Different Analysis Centers

2021 ◽  
Vol 13 (19) ◽  
pp. 3905
Author(s):  
Xuanping Li ◽  
Lin Pan
Keyword(s):  
Real Time ◽  
Precise Point Positioning ◽  
European Space Agency ◽  
Satellite System ◽  
Convergence Time ◽  
Navigation Satellite ◽  
Positioning Accuracy ◽  
The Real ◽  
Satellite Systems ◽  
Point Positioning

The space segment of all the five satellite systems capable of providing precise position services, namely BeiDou Navigation Satellite System (BDS) (including BDS-3 and BDS-2), Global Positioning System (GPS), GLObal NAvigation Satellite System (GLONASS), Galileo and Quasi-Zenith Satellite System (QZSS), has almost been fully deployed at present, and the number of available satellites is approximately 136. Currently, the precise satellite orbit and clock products from the analysis centers European Space Agency (ESA), GeoForschungsZentrum Potsdam (GFZ) and Wuhan University (WHU) can support all five satellite systems. Thus, it is necessary to investigate the positioning performance of a five-system integrated precise point positioning (PPP) (i.e., GRECJ-PPP) using the precise products from different analysis centers under the current constellation status. It should be noted that this study only focuses on the long-term performance of PPP based on daily observations. The static GRECJ-PPP can provide a convergence time of 5.9–6.9/2.6–3.1/6.3–7.1 min and a positioning accuracy of 0.2–0.3/0.2–0.3/1.0–1.1 cm in east/north/up directions, respectively, while the corresponding kinematic statistics are 6.8–8.6/3.3–4.0/7.8–8.1 min and 1.0–1.1/0.8/2.5–2.6 cm in three directions, respectively. For completeness, although the real-time precise products from the analysis center Centre National d’Etudes Spatiales (CNES) do not incorporate QZSS satellites, the performance of real-time PPP with the other four satellite systems (i.e., GREC-PPP) is also analyzed. The real-time GREC-PPP can achieve a static convergence time of 8.7/5.2/11.2 min, a static positioning accuracy of 0.6/0.8/1.3 cm, a kinematic convergence time of 11.5/6.9/13.0 min, and a kinematic positioning accuracy of 1.7/1.6/3.6 cm in the three directions, respectively. For comparison, the results of single-system and dual-system PPP are also provided. In addition, the consistency of the precise products from different analysis centers is characterized.

scholarly journals Multi-GNSS Combined Precise Point Positioning Using Additional Observations with Opposite Weight for Real-Time Quality Control

2019 ◽  
Vol 11 (3) ◽  
pp. 311 ◽  
Author(s):  
Wenju Fu ◽  
Guanwen Huang ◽  
Yuanxi Zhang ◽  
Qin Zhang ◽  
Bobin Cui ◽  
...  
Keyword(s):  
Quality Control ◽  
Real Time ◽  
Precise Point Positioning ◽  
Satellite System ◽  
Convergence Time ◽  
Navigation Satellite ◽  
Positioning Accuracy ◽  
Global Navigation ◽  
Point Positioning ◽  
Global Navigation Satellite

The emergence of multiple global navigation satellite systems (multi-GNSS), including global positioning system (GPS), global navigation satellite system (GLONASS), Beidou navigation satellite system (BDS), and Galileo, brings not only great opportunities for real-time precise point positioning (PPP), but also challenges in quality control because of inevitable data anomalies. This research aims at achieving the real-time quality control of the multi-GNSS combined PPP using additional observations with opposite weight. A robust multiple-system combined PPP estimation is developed to simultaneously process observations from all the four GNSS systems as well as single, dual, or triple systems. The experiment indicates that the proposed quality control can effectively eliminate the influence of outliers on the single GPS and the multiple-system combined PPP. The analysis on the positioning accuracy and the convergence time of the proposed robust PPP is conducted based on one week’s data from 32 globally distributed stations. The positioning root mean square (RMS) error of the quad-system combined PPP is 1.2 cm, 1.0 cm, and 3.0 cm in the east, north, and upward components, respectively, with the improvements of 62.5%, 63.0%, and 55.2% compared to those of single GPS. The average convergence time of the quad-system combined PPP in the horizontal and vertical components is 12.8 min and 12.2 min, respectively, while it is 26.5 min and 23.7 min when only using single-GPS PPP. The positioning performance of the GPS, GLONASS, and BDS (GRC) combination and the GPS, GLONASS, and Galileo (GRE) combination is comparable to the GPS, GLONASS, BDS and Galileo (GRCE) combination and it is better than that of the GPS, BDS, and Galileo (GCE) combination. Compared to GPS, the improvements of the positioning accuracy of the GPS and GLONASS (GR) combination, the GPS and Galileo (GE) combination, the GPS and BDS (GC) combination in the east component are 53.1%, 43.8%, and 40.6%, respectively, while they are 55.6%, 48.1%, and 40.7% in the north component, and 47.8%, 40.3%, and 34.3% in the upward component.

scholarly journals A New Weighting Approach with Application to Ionospheric Delay Constraint for GPS/GALILEO Real-Time Precise Point Positioning

2018 ◽  
Vol 8 (12) ◽  
pp. 2537 ◽  
Author(s):  
Tianjun Liu ◽  
Jian Wang ◽  
Hang Yu ◽  
Xinyun Cao ◽  
Yulong Ge
Keyword(s):  
Data Processing ◽  
Real Time ◽  
Precise Point Positioning ◽  
Convergence Time ◽  
Improvement Rate ◽  
The Real ◽  
Weighted Residuals ◽  
Weight Factors ◽  
Filter Convergence ◽  
Point Positioning

The real-time precise point positioning (RT PPP) technique has attracted increasing attention due to its high-accuracy and real-time performance. However, a considerable initialization time, normally a few hours, is required in order to achieve the proper convergence of the real-valued ambiguities and other estimate parameters. The RT PPP convergence time may be reduced by combining quad-constellation global navigation satellite system (GNSS), or by using RT ionospheric products to constrain the ionosphere delay. But to improve the performance of convergence and achieve the best positioning solutions in the whole data processing, proper and precise variances of the observations and ionospheric constraints are important, since they involve the processing of measurements of different types and with different accuracy. To address this issue, a weighting approach is proposed by a combination of the weight factors searching algorithm and a moving-window average filter. In this approach, the variances of ionospheric constraints are adjusted dynamically according to the principle that the sum of the quadratic forms of weighted residuals is the minimum, and the filter is applied to combine all epoch-by-epoch weight factors within a time window. To evaluate the proposed approach, datasets from 31 Multi-GNSS Experiment (MGEX) stations during the period of DOY (day of year) 023-054 in 2018 are analyzed with different positioning modes and different data processing methods. Experimental results show that the new weighting approach can significantly improve the convergence performance, and that the maximum improvement rate reaches 35.9% in comparison to the traditional method of priori variance in the static dual-frequency positioning mode. In terms of the RMS (Root Mean Square) statistics of positioning errors calculated by the new method after filter convergence, the same accuracy level as that of RT PPP without constraints can be achieved.

The Error Correction Model on Kalman Filter

2014 ◽  
Vol 644-650 ◽  
pp. 3968-3971
Author(s):  
Ya Qiu Hao
Keyword(s):  
Prediction Model ◽  
Real Time ◽  
Arrival Time ◽  
Running Speed ◽  
Correction Model ◽  
The Real ◽  
Time Prediction ◽  
Speed Prediction ◽  
Arrival Time Prediction ◽  
Bus Arrival Time Prediction

In this paper, authors extracted the data from the GPS equipment on the bus and established the real-time bus arrival time prediction model and bus running speed prediction model based on Kalman filtering technique. Analyse the error and build the error correction model. Firstly the bus running speed was predicted in the next section with the bus running speed prediction model, and then the bus arrival time was predicted with the real-time bus arrival time prediction model. Applying the newest information of bus running speed and bus arrival time, we were able to predict the real-time bus arrival time dynamically. The bus running speed prediction model and the real-time bus arrival time prediction model were assessed with the data of transit route NO.300 in Beijing. Lastly we assessed the real-time bus arrival time with the error between bus arrival time and real-time bus arrival time so that the prediction error was improved to 10 seconds which has higher prediction accuracy.

scholarly journals Real-time single-frequency precise positioning with Galileo satellites

2021 ◽  
pp. 1-17
Author(s):  
Berkay Bahadur
Keyword(s):  
Real Time ◽  
Experimental Tests ◽  
Convergence Time ◽  
Single Frequency ◽  
Positioning Accuracy ◽  
Precise Positioning ◽  
Frequency Code ◽  
Substantial Progress ◽  
Phase Combination ◽  
Gps Observations

Abstract Following substantial progress achieved recently, the Galileo constellation provides a considerable satellite resource for the GNSS applications. In this regard, the performance assessment of real-time single-frequency precise positioning with Galileo satellites is the main objective of this research. For this purpose, several experimental tests were conducted in this study with two single-frequency positioning models, namely single-frequency code-based positioning and code-phase combination. The results show that Galileo presents an adequate number of visible satellites sufficient for single-frequency positioning. Also, the study demonstrates that, in comparison to GPS observations, Galileo observations have a significantly lower noise level. For the single-frequency code-based positioning, Galileo presents a better positioning accuracy than GPS by 25⋅8% on average. When compared with GPS, a 9⋅4% better positioning accuracy is acquired from Galileo for the single-frequency code-phase combination, with its average convergence time shorter than GPS by a ratio of 24⋅4%.

scholarly journals Performance Evaluation of Real-Time Precise Point Positioning with Both BDS-3 and BDS-2 Observations

Sensors ◽  
2020 ◽  
Vol 20 (21) ◽  
pp. 6027
Author(s):  
Lin Pan ◽  
Xuanping Li ◽  
Wenkun Yu ◽  
Wujiao Dai ◽  
Cuilin Kuang ◽  
...  
Keyword(s):  
Real Time ◽  
Precise Point Positioning ◽  
Rapid Development ◽  
Satellite System ◽  
Convergence Time ◽  
Static Mode ◽  
The Real ◽  
Point Positioning ◽  
Time Critical

For time-critical precise applications, one popular technology is the real-time precise point positioning (PPP). In recent years, there has been a rapid development in the BeiDou Navigation Satellite System (BDS), and the constellation of global BDS (BDS-3) has been fully deployed. In addition to the regional BDS (BDS-2) constellation, the real-time stream CLK93 has started to support the BDS-3 constellation, indicating that the real-time PPP processing involving BDS-3 observations is feasible. In this study, the global positioning performance of real-time PPP with BDS-3/BDS-2 observations is initially evaluated using the datasets from 147 stations. In the east, north and upward directions, positioning accuracy of 1.8, 1.2 and 2.5 cm in the static mode, and of 6.7, 5.1 and 10.4 cm in the kinematic mode can be achieved for the BDS-3/BDS-2 real-time PPP, respectively, while the corresponding convergence time with a threshold of 10 cm is 32.9, 23.7 and 32.8 min, and 66.9, 42.9 and 69.1 min in the two modes in the three directions, respectively. To complete this, the availability of BDS-3/BDS-2 constellations, the quality of BDS-3/BDS-2 real-time precise satellite products, and the BDS-3/BDS-2 post-processed PPP solutions are also analyzed. For comparison, the results for the GPS are also presented.

Real-Time Model Method Research in Ship Pipeline System Leakage Detecting

2011 ◽  
Vol 105-107 ◽  
pp. 685-688 ◽  
Author(s):  
Hong Hao Yin ◽  
Hui Chen ◽  
Zhong Bo Peng
Keyword(s):  
Experimental Data ◽  
Pressure Gradient ◽  
Real Time ◽  
Pipeline System ◽  
Safe Operation ◽  
Time Model ◽  
Positioning Accuracy ◽  
The Real ◽  
Model Method ◽  
The Difference

Leakage of ship pipeline system has become a great hidden danger, which affects safe operation of ship and causes environmental pollution. In order to isolate leaking pipeline safely in emergency conditions, Real-time monitoring of ship pipeline system leakage is very important. In this paper, the real-time models of ship isothermal and thermal pipeline were established with a set of equations which is running synchronized with the actual execution pipeline, and the real-time model method was used to monitor ship pipeline system leakage. If the difference between measured values and calculated values is greater than a certain range, pipeline leakage is identified. The location of leakage is calculated based on pressure gradient. Only pressure, flow and temperature of the first and second end of the pipeline were needed, can this method achieve leakage detecting and locating. According to the analysis and verification from the experimental data, this method has high leakage resolution and positioning accuracy.

Sign in / Sign up

Export Citation Format

Share Document