scholarly journals Testing of a Polarimetric Current Sensor in the Frequency Domain

Sensors ◽  
2021 ◽  
Vol 21 (9) ◽  
pp. 3008
Author(s):  
Sławomir Andrzej Torbus ◽  
Jacek Andrzej Michalski
Keyword(s):  
Optical Fiber ◽  
Optical Fibers ◽  
Measurement Errors ◽  
Scientific Research ◽  
Single Mode ◽  
Market Potential ◽  
Current Sensor ◽  
Industrial Property ◽  
Measuring Coil ◽  
The Impact

This paper proposes an original model of a polarimetric current sensor, in which the measuring coil was made of a single mode telecommunication optical fiber ITU-T G.652, G.653, G.655, and G.657. This sensor was subjected to the commercialization process, which was carried out by a company combining the functionality of a technology transfer center with the capabilities of the Startit Fund Sp. z o.o. The published results included the analysis of the implementation readiness, the analysis of the market potential, the valuation of the industrial property rights of the invention and indicated further directions of scientific research on the sensor, which include the frequency analysis of measurement signals. This prompted the conduct of relevant scientific research. In this paper, the idea of measurement of current using polarimetric current sensor with optical fiber coil has been briefly characterized. It shows the definition and basic properties of the Discrete Fourier Transform (DFT). It discusses the technique of determining the value of each harmonic of signal at the input and output of polarimetric current sensor. The value of measurement errors and total harmonic distortion (THD) have been calculated. The general conclusions for disturbances in the processing realized in polarimetric current sensor have been formulated. In addition, the impact of the molar concentration of the dopant GeO2 in the core of the single mode telecommunication optical fibers and the impact of the number of turns of the measuring coil on the distortion accompanying the process of processing have been determined. Therefore, it can be concluded that the key result obtained during the research is the confirmation of the fact that single mode telecommunication optical fibers can be used to build the measuring coil of a polarimetric sensor used for measuring alternating currents. This means that the considered sensor, when measuring this type of currents, does not introduce additional distortions and distortions of their waveforms.

scholarly journals Multiple Light Coupling and Routing via a Microspherical Resonator Integrated in a T-Shaped Optical Fiber Configuration System

Micromachines ◽  
2018 ◽  
Vol 9 (10) ◽  
pp. 521 ◽  
Author(s):  
Georgia Konstantinou ◽  
Karolina Milenko ◽  
Kyriaki Kosma ◽  
Stavros Pissadakis
Keyword(s):  
Optical Fiber ◽  
Optical Fibers ◽  
Single Mode ◽  
Equatorial Region ◽  
Experimental Results ◽  
Glass Microsphere ◽  
Single Mode Optical Fiber ◽  
Light Coupling ◽  
Fiber Taper ◽  
Optical Fiber Taper

We demonstrate a three-port, light guiding and routing T-shaped configuration based on the combination of whispering gallery modes (WGMs) and micro-structured optical fibers (MOFs). This system includes a single mode optical fiber taper (SOFT), a slightly tapered MOF and a BaTiO3 microsphere for efficient light coupling and routing between these two optical fibers. The BaTiO3 glass microsphere is semi-immersed into one of the hollow capillaries of the MOF taper, while the single mode optical fiber taper is placed perpendicularly to the latter and in contact with the equatorial region of the microsphere. Experimental results are presented for different excitation and reading conditions through the WGM microspherical resonator, namely, through single mode optical fiber taper or the MOF. The experimental results indicate that light coupling between the MOF and the single mode optical fiber taper is facilitated at specific wavelengths, supported by the light localization characteristics of the BaTiO3 glass microsphere, with spectral Q-factors varying between 4.5 × 103 and 6.1 × 103, depending on the port and parity excitation.

scholarly journals Microdrilled tapers to enhance optical fiber lasers for sensing

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
R. A. Perez-Herrera ◽  
M. Bravo ◽  
P. Roldan-Varona ◽  
D. Leandro ◽  
L. Rodriguez-Cobo ◽  
...  
Keyword(s):  
Optical Fiber ◽  
Optical Fibers ◽  
Fiber Lasers ◽  
Signal To Noise Ratio ◽  
Power Level ◽  
Single Mode ◽  
Optical Signal ◽  
Single Mode Fiber ◽  
Output Power Level ◽  
Linear Cavity

AbstractIn this work, an experimental analysis of the performance of different types of quasi-randomly distributed reflectors inscribed into a single-mode fiber as a sensing mirror is presented. These artificially-controlled backscattering fiber reflectors are used in short linear cavity fiber lasers. In particular, laser emission and sensor application features are analyzed when employing optical tapered fibers, micro-drilled optical fibers and 50 μm-waist or 100 μm-waist micro-drilled tapered fibers (MDTF). Single-wavelength laser with an output power level of about 8.2 dBm and an optical signal-to-noise ratio of 45 dB were measured when employing a 50 μm-waist micro-drilled tapered optical fiber. The achieved temperature sensitivities were similar to those of FBGs; however, the strain sensitivity improved more than one order of magnitude in comparison with FBG sensors, attaining slope sensitivities as good as 18.1 pm/με when using a 50 μm-waist MDTF as distributed reflector.

scholarly journals Damage detection in laminar thermoplastic composite materials by means of embedded optical fibers

2006 ◽  
Vol 60 (7-8) ◽  
pp. 176-179
Author(s):  
Aleksandar Kojovic ◽  
Irena Zivkovic ◽  
Ljiljana Brajovic ◽  
Dragan Mitrakovic ◽  
Radoslav Aleksic
Keyword(s):  
Composite Materials ◽  
Optical Fiber ◽  
Real Time ◽  
Optical Fibers ◽  
Impact Damage ◽  
Experimental Testing ◽  
Low Energy ◽  
Thermoplastic Composite ◽  
Woven Fabric ◽  
The Impact

This paper investigates the possibility of applying optical fibers as sensors for investigating low energy impact damage in laminar thermoplastic composite materials, in real time. Impact toughness testing by a Charpy impact pendulum with different loads was conducted in order to determine the method for comparative measurement of the resulting damage in the material. For that purpose intensity-based optical fibers were built in to specimens of composite materials with Kevlar 129 (the DuPont registered trade-mark for poly(p-phenylene terephthalamide)) woven fabric as reinforcement and thermoplastic PVB (poly(vinyl butyral)) as the matrix. In some specimens part of the layers of Kevlar was replaced with metal mesh (50% or 33% of the layers). Experimental testing was conducted in order to observe and analyze the response of the material under multiple low-energy impacts. Light from the light-emitting diode (LED) was launched to the embedded optical fiber and was propagated to the phototransistor-based photo detector. During each impact, the signal level, which is proportional to the light intensity in the optical fiber, drops and then slowly recovers. The obtained signals were analyzed to determine the appropriate method for real time damage monitoring. The major part of the damage occurs during impact. The damage reflects as a local, temporary release of strain in the optical fiber and an increase of the signal level. The obtained results show that intensity-based optical fibers could be used for measuring the damage in laminar thermoplastic composite materials. The acquired optical fiber signals depend on the type of material, but the same set of rules (relatively different, depending on the type of material) could be specified. Using real time measurement of the signal during impact and appropriate analysis enables quantitative evaluation of the impact damage in the material. Existing methods in most cases use just the intensity of the signal before and after the impact, as the measure of damage. This method could be used to monitor the damage in real time, giving warnings before fatal damage occurs.

Automated Fiber-Optic System for Monitoring the Stability of the Pit Quarry Mass and Dumps

2021 ◽  
pp. 19-26
Author(s):  
А.D. Меkhtiyev ◽  
◽  
E.G. Neshina ◽  
P.Sh. Madi ◽  
D.A. Gorokhov ◽  
...  
Keyword(s):  
Rock Mass ◽  
Optical Fiber ◽  
Optical Fibers ◽  
Fiber Optic ◽  
Light Wave ◽  
Single Mode ◽  
Fiber Optic Sensors ◽  
Fiber Optic Sensor ◽  
Laboratory Sample ◽  
Single Mode Optical Fiber

This article ls with the issues related to the development of a system for monitoring the deformation and displacement of the rock mass leading to the collapse of the quarry sides. Monitoring system uses point-to-point fiber-optic sensors. Fiber-optic sensors and control cables of the communication line are made based on the single mode optical fibers, which allows to measure with high accuracy the deformations and displacements of the rock mass at a distance of 30-50 km. To create fiber-optic pressure sensors, an optical fiber of the ITU-T G. 652.D standard is used. Laboratory sample is developed concerning the point fiber-optic sensor made based on the two-arm Mach-Zender interferometer using a single mode optical fiber for monitoring strain (displacements) with a change in the sensitivity and a reduced influence of temperature interference leading to zero drift. The article presents a mathematical apparatus for calculating the intensity of radiation of a light wave passing through an optical fiber with and without mechanical stress. A laboratory sample of single mode optical fibers based on the Mach-Zender interferometer showed a fairly high linearity and accuracy in the measurement and can be used to control the strain of the mass after appropriate refinement of its design. Mathematical expressions are also given for determining the intensity of the light wave when the distance between the fixing points of a single mode optical fiber changes depending on the change in the external temperature. A diagram for measuring strain using a point fiber-optic strain sensor is developed. Hardware and software package is developed, which can be used to perform a number of settings of measuring channels. The work is aimed at solving the production problems of the Kenzhem quarry of AK Altynalmas JSC.

scholarly journals Characterization of a Y-Coupler and Its Impact on the Performance of Plastic Optical Fiber Links

Fibers ◽  
2018 ◽  
Vol 6 (4) ◽  
pp. 96 ◽  
Author(s):  
Alicia López ◽  
M. Losada ◽  
Javier Mateo ◽  
N. Antoniades ◽  
Xin Jiang ◽  
...  
Keyword(s):  
Optical Fibers ◽  
Power Distribution ◽  
Glass Fibers ◽  
Single Mode ◽  
Transmission Properties ◽  
Modal Power ◽  
Custom Made ◽  
Plastic Optical Fibers ◽  
The Impact

Couplers and splitters are common devices in single-mode and multi-mode glass fibers applications, where they perform a variety of functions. However, when switching to plastic optical fibers (POFs), there is a shortage of commercial devices, which are usually custom-made. The problem with these devices is that modal power distribution in POFs is easily modified by spatial disturbances that produce a localized strong power transfer between modes, thus changing their transmission properties. In this work, a commercial Y-coupler designed for POFs is experimentally characterized. Measurements of its spectral, spatial and temporal characteristics have been performed, including insertion loss as a function of wavelength, angular power distribution, and frequency response. The obtained results show that this device has an equalizing effect over the power spatial distribution that reduces the fiber bandwidth, demonstrating the importance of considering the impact of this type of devices on the transmission properties of any POF system.

scholarly journals Curvature Analysis in Fiber Optic Cables as a Tilt Sensor Based on Macro Bending

2020 ◽  
Vol 2 (2) ◽  
pp. 91-99
Author(s):  
Imam Mulyanto
Keyword(s):  
Optical Fiber ◽  
Optical Fibers ◽  
Fiber Optic ◽  
Laser Light ◽  
Single Mode ◽  
Fiber Optic Cable ◽  
Power Meter ◽  
Curvature Analysis ◽  
Bending Process ◽  
Tilt Sensor

The test has been successfully carried out on optical fibers to be used as a macrobending tilt sensor using SMF-28 single mode optical fiber. The optical fiber was molded with silicon rubber, then connected to a laser light and a power meter to see the intensity of the laser power produced. The principle is carried out using the macro bending phenomenon on single mode optical fibers, where the laser light intensity in the fiber optic cable will decrease if there is a bend or bending in the fiber optic cable. We can observe the power loss resulting from the macro bending process to find out how sensitive the optical fiber is to changes in a given angle. The resulting optical fiber sensitivity value is -0.1534o/dBm.

scholarly journals Research of multisensor characteristics based on optical fiber

Doklady BGUIR ◽  
2021 ◽  
Vol 19 (1) ◽  
pp. 70-78
Author(s):  
A. O. Zenevich ◽  
S. V. Zhdanovich ◽  
H. V. Vasilevski ◽  
A. A. Lagutik ◽  
T. G. Kovalenko ◽  
...  
Keyword(s):  
Optical Fiber ◽  
Minimum Distance ◽  
Optical Radiation ◽  
Radiation Power ◽  
Optical Loss ◽  
Single Mode ◽  
Optical Reflectometry ◽  
Optimal Values ◽  
The Impact ◽  
To Receive

The research results of multisensors based on optical fiber, the principle of which is to change the conditions of propagation of optical radiation in the optical fiber in the places where macro-bends are formed at the points of impact, are presented in the paper. The formation of macro-bends leads to an additional attenuation of the power of optical radiation propagating through the optical fiber. A single-mode optical fiber was used with the parameters, which are supported by numerous manufacturers and comply with the recommendations of ITU-T G.655. The measurements were carried out for four wavelengths of optical radiation (1310, 1490, 1550, 1625 nm), corresponding to the transparency windows of the optical loss spectrum of the optical fiber. Using optical reflectometry methods, it was determined that the amount of attenuation of optical radiation of each macro-bend formed at the point of action of the multisensor does not depend on the number of simultaneously formed macro-bends and also does not depend on the location of the point of action along the length of the multisensor. The dependences of the attenuation of the optical radiation power introduced by the macro-bends of the optical fiber on the radius, length, or angle of the macro-bends formed at the multisensory impact points are determined experimentally. The obtained dependences also allow one to determine the optimal parameters of the formed macro-bends of the multisensor to obtain the maximum range of attenuation change for each value of the wavelength. The values of the minimum distance between the impact points, the maximum number of impact points and the optimal values of the radius and angle of the optical fiber macro-bend at the impact points are determined. The results obtained provide opportunities to continue the development of multisensors that allow us to receive information about parameters from several impact points, that are located on a single optical fiber, simultaneously.

scholarly journals Photonic Jet-Shaped Optical Fiber Tips versus Lensed Fibers

Photonics ◽  
2021 ◽  
Vol 8 (9) ◽  
pp. 373
Author(s):  
Djamila Bouaziz ◽  
Grégoire Chabrol ◽  
Assia Guessoum ◽  
Nacer-Eddine Demagh ◽  
Sylvain Lecler
Keyword(s):  
Optical Fiber ◽  
Optical Fibers ◽  
Single Mode ◽  
Spot Size ◽  
Base Diameter ◽  
Core Diameter ◽  
Focus Spot ◽  
Photonic Jet ◽  
Focus Spot Size ◽  
Focusing Properties

Shaped optical fiber tips have recently attracted a lot of interest for photonic jet light focusing due to their easy manipulation to scan a sample. However, lensed optical fibers are not new. This study analyzes how fiber tip parameters can be used to control focusing properties. Our study shows that the configurations to generate a photonic jet (PJ) can clearly be distinguished from more classical-lensed fibers focusing. PJ is a highly concentrated, propagative light beam, with a full width at half maximum (FWHM) that can be lower than the diffraction limit. According to the simulations, the PJs are obtained when light is coupled in the guide fundamental mode and when the base diameter of the microlens is close to the core diameter. For single mode fibers or fibers with a low number of modes, long tips with a relatively sharp shape achieve PJ with smaller widths. On the contrary, when the base diameter of the microlens is larger than the fiber core, the focus point tends to move away from the external surface of the fiber and has a larger width. In other words, the optical system (fiber/microlens) behaves in this case like a classical-lensed fiber with a larger focus spot size. The results of this study can be used as guidelines for the tailored fabrication of shaped optical fiber tips according to the targeted application.

Tensile Characterizations of Optical Fiber Embedded in Epoxy Glass Composite

2014 ◽  
Vol 656 ◽  
pp. 11-16
Author(s):  
Rochdi El Abdi ◽  
Irina Severin
Keyword(s):  
Optical Fiber ◽  
Optical Fibers ◽  
Optical Sensors ◽  
Vinyl Ester ◽  
Interfacial Adhesion ◽  
Single Mode ◽  
Fracture Mechanisms ◽  
Glass Composite ◽  
Pull Out ◽  
Unidirectional Fibers

Photosensitive single mode optical fibers have been embedded in composite sample in order to be used in optical sensors which monitor the health of civil engineering structure.A simple composite with epoxy vinyl ester matrix reinforced with E-glass unidirectional fibers was implemented using two embedded optical fibers. Interfacial adhesion stress was determined using pull-out test and stress values are correlated to fracture mechanisms based on SEM observations.

Sign in / Sign up

Export Citation Format

Share Document