scholarly journals A Comprehensive Comparison and Validation of Published Methods to Detect Turn Switch during Alpine Skiing

Sensors ◽  
2021 ◽  
Vol 21 (7) ◽  
pp. 2573
Author(s):  
Aaron Martínez ◽  
Cory Snyder ◽  
Stephanie Moore ◽  
Thomas Stöggl
Keyword(s):  
Motion Capture ◽  
Inertial Measurement Unit ◽  
Measurement Unit ◽  
Alpine Skiing ◽  
Inertial Measurement ◽  
Performance Accuracy ◽  
Accuracy And Precision ◽  
Comprehensive Comparison ◽  
Measurement Units ◽  
Electromyography Signals

The instant of turn switch (TS) in alpine skiing has been assessed with a variety of sensors and TS concepts. Despite many published methodologies, it is unclear which is best or how comparable they are. This study aimed to facilitate the process of choosing a TS method by evaluating the accuracy and precision of the methodologies previously used in literature and to assess the influence of the sensor type. Optoelectronic motion capture, inertial measurement units, pressure insoles, portable force plates, and electromyography signals were recorded during indoor treadmill skiing. All TS methodologies were replicated as stated in their respective publications. The method proposed by Supej assessed with optoelectronic motion capture was used as a comparison reference. TS time differences between the reference and each methodology were used to assess accuracy and precision. All the methods analyzed showed an accuracy within 0.25 s, and ten of them within 0.05 s. The precision ranged from ~0.10 s to ~0.60 s. The TS methodologies with the best performance (accuracy and precision) were Klous Video, Spörri PI (pressure insoles), Martinez CTD (connected boot), and Yamagiwa IMU (inertial measurement unit). In the future, the specific TS methodology should be chosen with respect to sensor selection, performance, and intended purpose.

scholarly journals Comparison of Trotting Stance Detection Methods from an Inertial Measurement Unit Mounted on the Horse’s Limb

Sensors ◽  
2020 ◽  
Vol 20 (10) ◽  
pp. 2983
Author(s):  
Marie Sapone ◽  
Pauline Martin ◽  
Khalil Ben Mansour ◽  
Henry Château ◽  
Frédéric Marin
Keyword(s):  
Motion Capture ◽  
Inertial Measurement Unit ◽  
Detection Methods ◽  
Measurement Unit ◽  
Inertial Measurement Units ◽  
Inertial Measurement ◽  
New Methods ◽  
Measurement Units ◽  
Ground Types ◽  
Stride Duration

The development of on-board sensors, such as inertial measurement units (IMU), has made it possible to develop new methods for analyzing horse locomotion to detect lameness. The detection of spatiotemporal events is one of the keystones in the analysis of horse locomotion. This study assesses the performance of four methods for detecting Foot on and Foot off events. They were developed from an IMU positioned on the canon bone of eight horses during trotting recording on a treadmill and compared to a standard gold method based on motion capture. These methods are based on accelerometer and gyroscope data and use either thresholding or wavelets to detect stride events. The two methods developed from gyroscopic data showed more precision than those developed from accelerometric data with a bias less than 0.6% of stride duration for Foot on and 0.1% of stride duration for Foot off. The gyroscope is less impacted by the different patterns of strides, specific to each horse. To conclude, methods using the gyroscope present the potential of further developments to investigate the effects of different gait paces and ground types in the analysis of horse locomotion.

scholarly journals Accuracy and Repeatability of Spatiotemporal Gait Parameters Measured with an Inertial Measurement Unit

2021 ◽  
Vol 10 (9) ◽  
pp. 1804
Author(s):  
Jorge Posada-Ordax ◽  
Julia Cosin-Matamoros ◽  
Marta Elena Losa-Iglesias ◽  
Ricardo Becerro-de-Bengoa-Vallejo ◽  
Laura Esteban-Gonzalo ◽  
...  
Keyword(s):  
Healthy Subjects ◽  
Inertial Measurement Unit ◽  
Measurement Unit ◽  
Inertial Measurement Units ◽  
Inertial Measurement ◽  
High Speeds ◽  
Controlled Conditions ◽  
Gait Parameters ◽  
Measurement Units ◽  
Accuracy And Repeatability

In recent years, interest in finding alternatives for the evaluation of mobility has increased. Inertial measurement units (IMUs) stand out for their portability, size, and low price. The objective of this study was to examine the accuracy and repeatability of a commercially available IMU under controlled conditions in healthy subjects. A total of 36 subjects, including 17 males and 19 females were analyzed with a Wiva Science IMU in a corridor test while walking for 10 m and in a threadmill at 1.6 km/h, 2.4 km/h, 3.2 km/h, 4 km/h, and 4.8 km/h for one minute. We found no difference when we compared the variables at 4 km/h and 4.8 km/h. However, we found greater differences and errors at 1.6 km/h, 2.4 km/h and 3.2 km/h, and the latter one (1.6 km/h) generated more error. The main conclusion is that the Wiva Science IMU is reliable at high speeds but loses reliability at low speeds.

Systematic Calibration Method for FOG Inertial Measurement Units

2013 ◽  
Vol 662 ◽  
pp. 717-720 ◽  
Author(s):  
Zhen Yu Zheng ◽  
Yan Bin Gao ◽  
Kun Peng He
Keyword(s):  
Inertial Measurement Unit ◽  
Inertial Sensors ◽  
Calibration Method ◽  
State Equation ◽  
Measurement Unit ◽  
Observation System ◽  
Body Frame ◽  
Inertial Measurement ◽  
Measurement Units ◽  
Error Coefficients

As an inertial sensors assembly, the FOG inertial measurement unit (FIMU) must be calibrated before being used. The paper presents a one-time systematic IMU calibration method only using two-axis low precision turntable. First, the detail error model of inertial sensors using defined body frame is established. Then, only velocity taken as observation, system 33 state equation is established including the lever arm effects and nonlinear terms of scale factor error. The turntable experiments verify that the method can identify all the error coefficients of FIMU on low-precision two-axis turntable, after calibration the accuracy of navigation is improved.

scholarly journals Kajian Inertial Measurement Unit Berbasis Arduino Untuk Dokumentasi Digital Motion Capture Tarian Tradisional

2017 ◽  
Vol 2 (2) ◽  
pp. 251
Author(s):  
FX. Satriyo Dwi Nugroho
Keyword(s):  
Motion Capture ◽  
Inertial Measurement Unit ◽  
Rotation Axis ◽  
Three Dimensions ◽  
Measurement Unit ◽  
Motion Capture Data ◽  
Inertial Measurement ◽  
Digital Heritage ◽  
Traditional Dance ◽  
Digital Documentation

Visual digital documentation of traditional dance in Indonesia is still limited to photographs and videos recording. Motion capture technology has the potential to add more depth documenting traditional dances. This technology maps the position of the model (in this case the human body) and its motion in three dimensions. There are two popular ways in recording motion capture, using Vision Based Camera and Inertial measurement unit. Inertial Measurement Unit works by combining accelerometer and gyroscope to detect changes in the rotation axis relative lateral and angular. Those changes will be interpreted Arduino micro-controller platform as functions of motions that recorded as a motion capture data. Motion capture data that was obtained from traditional dance in Indonesia can be applied for many things such as education, standardization, documentation, and preservation of cultural assetsKeywords: digital documentatuion, motion capture, inertia measurement unit, angular relative, digital heritage. Abstrak Dokumentasi digital secara visual untuk tari tradisional di Indonesia masih terbatas pada perekaman secara fotografis dan videografis. Teknologi motion capture memiliki potensi untuk menambah kekayaan dokumentasi untuk tari tradisional. Teknologi ini memetakan posisi model (dalam hal ini tubuh manusia) dan pergerakannya secara 3 dimensi. Ada dua cara yang populer dalam perekaman motion capture, menggunakan Vision Based Camera dan Inertial measurement unit. Inertial Measurement Unit bekerja dengan menggabungkan accelerometer dan gyroscope untuk mendeteksi perubahan sumbu rotasi secara lateral dan angular relative. Perubahan ini yang oleh platform mikro-kontroler Arduino akan diterjemahkan sebagai fungsi gerakan yang nantinya akan direkam sebagai data motion capture. Data dokumentasi digital motion capture yang didapat dari perekaman gerak tari tradisional di Indonesia dapat diaplikasikan untuk banyak hal seperti edukasi, standarisasi, pembuatan animasi, game, dan pelestarian aset budaya. Kata kunci: dokumentasi digital, motion capture, inertia measurement unit, angular relative, pelestarian asset budaya

scholarly journals In Vivo Measurement of Wrist Movements during the Dart-Throwing Motion Using Inertial Measurement Units

Sensors ◽  
2021 ◽  
Vol 21 (16) ◽  
pp. 5623
Author(s):  
Gabriella Fischer ◽  
Michael Alexander Wirth ◽  
Simone Balocco ◽  
Maurizio Calcagni
Keyword(s):  
Range Of Motion ◽  
Motion Capture ◽  
Absolute Difference ◽  
Measurement Unit ◽  
Inertial Measurement Units ◽  
Mean Absolute Difference ◽  
Inertial Measurement ◽  
Dart Throwing ◽  
Measurement Units ◽  
Throwing Motion

Background: This study investigates the dart-throwing motion (DTM) by comparing an inertial measurement unit-based system previously validated for basic motion tasks with an optoelectronic motion capture system. The DTM is interesting as wrist movement during many activities of daily living occur in this movement plane, but the complex movement is difficult to assess clinically. Methods: Ten healthy subjects were recorded while performing the DTM with their right wrist using inertial sensors and skin markers. Maximum range of motion obtained by the different systems and the mean absolute difference were calculated. Results: In the flexion–extension plane, both systems calculated a range of motion of 100° with mean absolute differences of 8°, while in the radial–ulnar deviation plane, a mean absolute difference of 17° and range of motion values of 48° for the optoelectronic system and 59° for the inertial measurement units were found. Conclusions: This study shows the challenge of comparing results of different kinematic motion capture systems for complex movements while also highlighting inertial measurement units as promising for future clinical application in dynamic and coupled wrist movements. Possible sources of error and solutions are discussed.

scholarly journals A Separated Calibration Method for Inertial Measurement Units Mounted on Three-Axis Turntables

Sensors ◽  
2018 ◽  
Vol 18 (9) ◽  
pp. 2846 ◽  
Author(s):  
Chun-mei Dong ◽  
Shun-qing Ren ◽  
Xi-jun Chen ◽  
Zhen-huan Wang
Keyword(s):  
Inertial Measurement Unit ◽  
Functional Relationship ◽  
Calibration Method ◽  
Measurement Unit ◽  
Model Parameters ◽  
Inertial Measurement ◽  
Measurement Units ◽  
Suboptimal Design ◽  
Calibration Accuracy ◽  
Simulation Results

Inertial Measurement Unit (IMU) calibration accuracy is easily affected by turntable errors, so the primary aim of this study is to reduce the dependence on the turntable’s precision during the calibration process. Firstly, the indicated-output of the IMU considering turntable errors is constructed and with the introduction of turntable errors, the functional relationship between turntable errors and the indicated-output was derived. Then, based on a D-suboptimal design, a calibration method for simultaneously identifying the IMU error model parameters and the turntable errors was proposed. Simulation results showed that some turntable errors could thus be effectively calibrated and automatically compensated. Finally, the theoretical validity was verified through experiments. Compared with the traditional method, the method proposed in this paper can significantly reduce the influence of the turntable errors on the IMU calibration accuracy.

scholarly journals Quaternion-Based Local Frame Alignment between an Inertial Measurement Unit and a Motion Capture System

Sensors ◽  
2018 ◽  
Vol 18 (11) ◽  
pp. 4003 ◽  
Author(s):  
Jung Keun Lee ◽  
Woo Chang Jung
Keyword(s):  
Angular Velocity ◽  
Motion Capture ◽  
Inertial Measurement Unit ◽  
Least Squares Method ◽  
Measurement Unit ◽  
Motion Capture System ◽  
Inertial Measurement ◽  
Local Frame ◽  
Velocity Transformation ◽  
Frame Alignment

Local frame alignment between an inertial measurement unit (IMU) system and an optical motion capture system (MCS) is necessary to combine the two systems for motion analysis and to validate the accuracy of IMU-based motion data by using references obtained through the MCS. In this study, we propose a new quaternion-based local frame alignment method where equations of angular velocity transformation are used to determine the frame alignment orientation in the form of quaternion. The performance of the proposed method was compared with those of three other methods by using data with different angular velocities, noises, and alignment orientations. Furthermore, the effects of the following three factors on the estimation performance were investigated for the first time: (i) transformation concept, i.e., angular velocity transformation vs. angle transformation; (ii) orientation representations, i.e., quaternion vs. direction cosine matrix (DCM); and (iii) applied solvers, i.e., nonlinear least squares method vs. least squares method through pseudoinverse. Within our limited test data, we obtained the following results: (i) the methods using angular velocity transformation were better than the method using angle transformation; (ii) the quaternion is more suitable than the DCM; and (iii) the applied solvers were not critical in general. The proposed method performed the best among the four methods. We surmise that the fewer number of components and constraints of the quaternion in the proposed method compared to the number of components and constraints of the DCM-based methods may result in better accuracy. Owing to the high accuracy and easy setup, the proposed method can be effectively used for local frame alignment between an IMU and a motion capture system.

Sign in / Sign up

Export Citation Format

Share Document