scholarly journals Effects of Movement for High Time-Bandwidths in Batched Pulse Compression Range-Doppler Radar

Sensors ◽  
2021 ◽  
Vol 21 (7) ◽  
pp. 2492
Author(s):  
Dominik Bok ◽  
Daniel O’Hagan ◽  
Peter Knott
Keyword(s):  
Fast Moving ◽  
Pulse Compression ◽  
Doppler Radar ◽  
Doppler Frequency ◽  
Passive Radar ◽  
Moving Targets ◽  
Effective Velocity ◽  
Coherent Integration ◽  
The Impact ◽  
Integration Gain

Radar detection and track building performance is an essential part of a radar system. A high realized coherent integration gain often contributes to an improved performance. This is essential to the successful detection and tracking of weak moving targets. However, the actual movement within the coherent processing interval can introduce range walk effects. The processing will then result in range and Doppler frequency resolutions that become finer than a single moving point scatterer’s spread over range and—often not considered—over Doppler frequency. In particular for a wide instantaneous bandwidth, the impact on the achievable integration gain can become severe already for a constant effective velocity. Therefore, high desired integration gains as required in passive radar are not easily achieved against relatively fast moving targets. The main intent of this article is to present the movement effects on a classical range-Doppler analysis to give an insight on the achievable performance and to quantify otherwise appearing degradations. Interestingly, a classical analysis of experimental datasets evaluated from a DVB-T based passive radar measurement campaign even resolved the fluctuation of a target response within the instantaneously processed bandwidth. The findings strengthen the need for advanced processing methods that can at least partly address individual implications of fast moving targets in real-time applications properly.

scholarly journals 2-D Coherent Integration Processing and Detecting of Aircrafts Using GNSS-Based Passive Radar

2018 ◽  
Vol 10 (7) ◽  
pp. 1164 ◽  
Author(s):  
Hong-Cheng Zeng ◽  
Jie Chen ◽  
Peng-Bo Wang ◽  
Wei Yang ◽  
Wei Liu
Keyword(s):  
Matched Filter ◽  
Power Level ◽  
Doppler Frequency ◽  
Satellite System ◽  
Passive Radar ◽  
Match Filter ◽  
Coherent Integration ◽  
Long Time ◽  
Global Navigation Satellite ◽  
Aircraft Detection

Long time coherent integration is a vital method for improving the detection ability of global navigation satellite system (GNSS)-based passive radar, because the GNSS signal is not radar-designed and its power level is very low. For aircraft detection, the large range cell migration (RCM) and Doppler frequency migration (DFM) will seriously affect the coherent processing of azimuth signals, and the traditional range match filter will also be mismatched due to the Doppler-intolerant characteristic of GNSS signals. Accordingly, the energy loss of 2-dimensional (2-D) coherent processing is inevitable in traditional methods. In this paper, a novel 2-D coherent integration processing and algorithm for aircraft target detection is proposed. For azimuth processing, a modified Radon Fourier Transform (RFT) with range-walk removal and Doppler rate estimation is performed. In respect to range compression, a modified matched filter with a shifting Doppler is applied. As a result, the signal will be accurately focused in the range-Doppler domain, and a sufficiently high SNR can be obtained for aircraft detection with a moving target detector. Numerical simulations demonstrate that the range-Doppler parameters of an aircraft target can be obtained, and the position and velocity of the aircraft can be estimated accurately by multiple observation geometries due to abundant GNSS resources. The experimental results also illustrate that the blind Doppler sidelobe is suppressed effectively and the proposed algorithm has a good performance even in the presence of Doppler ambiguity.

On the Impact of Drone Airscrews Signature on Passive Radar Detection and Tracking Stages

2020 ◽  
Author(s):  
Maria-Pilar Jarabo-Amores ◽  
David Mata-Moya ◽  
Pedro-Jose Gomez-del-Hoyo ◽  
Nerea del-Rey-Maestre ◽  
Javier Rosado-Sanz
Keyword(s):  
Passive Radar ◽  
Radar Detection ◽  
Detection And Tracking ◽  
The Impact

scholarly journals Simulation of X-Band Rainfall Observations from S-Band Radar Data

2006 ◽  
Vol 23 (9) ◽  
pp. 1195-1205 ◽  
Author(s):  
V. Chandrasekar ◽  
S. Lim ◽  
E. Gorgucci
Keyword(s):  
Doppler Radar ◽  
Theoretical Models ◽  
Radar Data ◽  
Shape Distribution ◽  
Microphysical Properties ◽  
Rain Medium ◽  
Microphysical Parameters ◽  
X Band ◽  
State Water ◽  
The Impact

Abstract To design X-band radar systems as well as evaluate algorithm development, it is useful to have simultaneous X-band observation with and without the impact of path attenuation. One way to develop that dataset is through theoretical models. This paper presents a methodology to generate realistic range profiles of radar variables at attenuating frequencies, such as X band, for rain medium. Fundamental microphysical properties of precipitation, namely, size and shape distribution information, are used to generate realistic profiles of X band starting with S-band observation. Conditioning the simulation from S band maintains the natural distribution of rainfall microphysical parameters. Data from the Colorado State University’s University of Chicago–Illinois State Water Survey (CHILL) radar and the National Center for Atmospheric Research S-band dual-polarization Doppler radar (S-POL) are used to simulate X-band radar variables. Three procedures to simulate the radar variables and sample applications are presented.

High-Frequency and Passive Radar Designs for Homeland Security Applications

2011 ◽  
Vol 45 (3) ◽  
pp. 111-119 ◽  
Author(s):  
Magdy F. Iskander ◽  
Zhengqing Yun ◽  
Nuri Celik ◽  
Hyoungsun Youn ◽  
Nobutaka Omaki ◽  
...  
Keyword(s):  
Surface Roughness ◽  
Homeland Security ◽  
High Frequency ◽  
Beam Steering ◽  
Antenna System ◽  
Hf Radar ◽  
Passive Radar ◽  
High Definition ◽  
Security Applications ◽  
The Impact

AbstractEmerging homeland security applications require low-cost and fast, deployable, high-frequency (HF) radar systems and the ability to operate in challenging terrain environments. With the need to cover as many border and coastal areas as possible, taking advantages of available transmitter resources to track targets using passive radar technologies is yet another area of research of considerable interest. In this paper, we describe the development of an HF radar system that meets these operational challenges, and we also highlight some recent implementation of the passive radar technology for homeland security applications. Specifically, we describe the design of a novel, electrically small HF antenna system consisting of three helical elements, one connected to the feed port while the other two are folded arms terminated with switchable loads. The antenna is 0.90-m (<3 feet) high with a small ground disk of 0.60 m (∼2 feet) diameter. The antenna is self-resonant at multiple frequencies (5.7, 16, 20.5, and 27.7 MHz) and with input impedance values that can be easily matched to a 50-Ω coaxial feed. Values of the electrical size ka range from 0.44 at 30 MHz down to 0.08 at 5.7 MHz. The achieved bandwidths range from 1.4% up to 12% and associated efficiencies range from 66.2% to 76% within the HF band (3‐30 MHz). As for the operational requirement in challenging terrain environments, a setup in a hilltop-type environment with a slope terrain and surface roughness was considered. A propagation modeling and ray-tracing approach was used to evaluate the impact of such terrain conditions on the effective interelement spacing of an HF radar antenna array and the subsequent impact on its beamforming and beam steering performance. It is shown that while the effect of the slope on the effective interelement spacing of the array could be very significant, diffraction effects from surface roughness resulted in a much smaller, but significant, error of about 18°. Results from some initial work on the implementation of passive radar technology, with focus on addressing the bandwidth requirement to ensure practical resolution values, are also described. It is shown that signals from wide-band transmitters (e.g., High Definition Television [HDTV] signals) rather than those from radio stations are required to provide acceptable range resolution. These as well as simulation and experimental results of the antenna design, and results from beamforming simulations illustrating the effect of a rough hilltop terrain on the HF radar performance are described.

Effects of laser radiation on immobile and fast-moving targets

2009 ◽  
Vol 39 (4) ◽  
pp. 321-327 ◽  
Author(s):  
V V Osipov ◽  
V V Lisenkov ◽  
V A Shitov ◽  
K E Luk'yashin
Keyword(s):  
Laser Radiation ◽  
Fast Moving ◽  
Moving Targets
Sign in / Sign up

Export Citation Format

Share Document