scholarly journals A Highly Compact Antipodal Vivaldi Antenna Array for 5G Millimeter Wave Applications

Sensors ◽  
2021 ◽  
Vol 21 (7) ◽  
pp. 2360
Author(s):  
Amruta Sarvajeet Dixit ◽  
Sumit Kumar ◽  
Shabana Urooj ◽  
Areej Malibari
Keyword(s):  
Antenna Array ◽  
Radiation Pattern ◽  
Millimeter Wave ◽  
High Gain ◽  
Substantial Improvement ◽  
Antenna Design ◽  
Frequency Range ◽  
Antenna Size ◽  
Operating Frequency Range ◽  
Vivaldi Antenna

This paper presents a compact 1 × 4 antipodal Vivaldi antenna (AVA) array for 5G millimeter-wave applications. The designed antenna operates over 24.19 GHz–29.15 GHz and 30.28 GHz–40.47 GHz frequency ranges. The proposed antenna provides a high gain of 8 dBi to 13.2 dBi and the highest gain is obtained at 40.3 GHz. The proposed antenna operates on frequency range-2 (FR2) and covers n257, n258, n260, and n261 frequency bands of 5G communication. The corrugations and RT/Duroid 5880 substrate are used to reduce the antenna size to 24 mm × 28.8 mm × 0.254 mm, which makes the antenna highly compact. Furthermore, the corrugations play an important role in the front-to-back ratio improvement, which further enhances the gain of the antenna. The corporate feeding is optimized meticulously to obtain an enhanced bandwidth and narrow beamwidth. The radiation pattern does not vary over the desired operating frequency range. In addition, the experimental results of the fabricated antenna coincide with the simulated results. The presented antenna design shows a substantial improvement in size, gain, and bandwidth when compared to what has been reported for an AVA with nearly the same size, which makes the proposed antenna one of the best candidates for application in devices that operate in the millimeter frequency range.

scholarly journals 3D Printed High Gain Complementary Dipole/Slot Antenna Array

2018 ◽  
Vol 8 (8) ◽  
pp. 1410 ◽  
Author(s):  
Kwok So ◽  
Kwai Luk ◽  
Chi Chan ◽  
Ka Chan
Keyword(s):  
Antenna Array ◽  
High Gain ◽  
Dipole Antenna ◽  
Slot Antenna ◽  
Impedance Bandwidth ◽  
Antenna Element ◽  
Frequency Range ◽  
Operating Frequency Range ◽  
3D Printed ◽  
Stable Frequency

By employing the complementary dipole antenna concept to the normal waveguide fed slot radiator, an improved antenna element with wide impedance bandwidth and symmetrical radiation patterns is developed. This is achieved by mounting two additional metallic cuboids on the top of the slot radiator, which is equivalent to adding an electric dipole on top of the magnetic dipole due to the slot radiator. Then, a high-gain antenna array was designed based on the improved element and fabricated, using 3D printing technology, with stable frequency characteristics operated at around 28 GHz. This was followed by metallization via electroplating. Analytical results agree well with the experimental results. The measured operating frequency range for the reflection coefficient ≤−15 dB is from 25.7 GHz to 29.8 GHz; its corresponding fractional impedance bandwidth is 14.8%. The measured gain is approximately 32 dBi, with the 3 dB beamwidth around 4°.

scholarly journals Double Meander Dipole Antenna Array with Enhanced Bandwidth and Gain

2021 ◽  
Vol 2021 ◽  
pp. 1-8
Author(s):  
Halgurd N. Awl ◽  
Rashad H. Mahmud ◽  
Bakhtiar A. Karim ◽  
Yadgar I. Abdulkarim ◽  
Muharrem Karaaslan ◽  
...  
Keyword(s):  
Antenna Array ◽  
High Gain ◽  
Dipole Antenna ◽  
Operating Frequency ◽  
Center Frequency ◽  
Impedance Bandwidth ◽  
Frequency Range ◽  
Wide Bandwidth ◽  
Low Profile ◽  
Operating Frequency Range

In this paper, a new design of high gain and wide bandwidth microstrip patch antenna array containing double meander dipole structure is proposed. Two in-phase resonant frequencies in the Ku-band (12–18 GHz) could be achieved in the double meander dipole array structure, which lead to enhance impedance bandwidth without costing extra design section. Besides, further enhanced gain of 2 dBi of the array over the entire operating frequency range has been achieved by introducing a double-layer substrate technique. The proposed antenna has been fabricated using the E33 model LPKF prototyping PCB machine. The measurement results have been performed, and they are in very good agreement with the simulation results. The measured –10 dB impedance bandwidth indicates that the array provides a very wide bandwidth which is around 30% at the center frequency of 15.5 GHz. A stable gain with a peak value of 10 dBi is achieved over the operating frequency range. The E- and H-plane radiation patterns are simulated, and a very low sidelobe level is predicted. The proposed antenna is simple and has relatively low-profile, and it could be a good candidate for millimeter wave communications.

scholarly journals A Cylindrical Wideband Conformal Fractal Antenna for GPS Application

2017 ◽  
Vol 6 (3) ◽  
pp. 64
Author(s):  
R. Sahoo ◽  
D. Vakula
Keyword(s):  
Conformal Geometry ◽  
Ground Plane ◽  
Antenna Design ◽  
Fractal Antenna ◽  
Frequency Range ◽  
Bandwidth Enhancement ◽  
Conformal Antenna ◽  
Operating Frequency Range ◽  
Definition Of ◽  
Good Agreement

In this paper, a novel wideband conformal fractal antenna is proposed for GPS application. The concepts of fractal and partial ground are used in conformal antenna design for miniaturization and bandwidth enhancement. It comprises of Minkowski fractal patch on a substrate of Rogers RT/duroid 5880 with permittivity 2.2 and thickness of 0.787mm with microstrip inset feed. The proposed conformal antenna has a patch dimension about 0.39λmm×0.39λmm, and partial ground plane size is 29mm×90mm.The proposed antenna is simulated, fabricated and measured for both planar and conformal geometry, with good agreement between measurements and simulations. The size of the fractal patch is reduced approximately by 32% as compared with conventional patch. It is observed that the conformal antenna exhibits a fractional bandwidth(for the definition of -10dB) of 43.72% operating from 1.09 to 1.7GHz, which is useful for L1(1.56-1.58GHz), L2(1.21-1.23GHz), L3(1.37-1.39GHz), L4(1.36-1.38GHz), and L5(1.16-1.18 GHz) in GPS and Galileo frequencies: E=1589.742MHz(4MHzbandwidth), E2=1561. 098MHz(4MHzbandwidth), E5a=1176.45MHz(=L5),E5b= 1207.14MHz, and E6=1278.75MHz(40MHz bandwidth). The radiation pattern exhibits an omnidirectional pattern, and gain of proposed antenna is 2.3dBi to 3.5dBi within operating frequency range.

Design and development of patch compensated wideband Vivaldi antenna

2018 ◽  
Vol 10 (9) ◽  
pp. 1081-1087
Author(s):  
Rana Pratap Yadav ◽  
Vinay Kumar ◽  
Rajveer Dhawan
Keyword(s):  
Computer Aided Design ◽  
Beam Width ◽  
Antenna Design ◽  
Planar Antenna ◽  
Optimized Design ◽  
Frequency Range ◽  
Feed Line ◽  
Vivaldi Antenna ◽  
Aided Design ◽  
Theoretical Procedure

AbstractDesign and fabrication of a microstrip feedline-based Vivaldi antenna in the frequency range of 6.0–8.0 GHz have been presented. The Vivaldi antenna is a planar antenna, fabricated at the microstrip feedline by having an exponentially tapered slot profile on it. An optimized computer-aided design has been developed and simulated for the desired radiation parameters like voltage standing wave ratio, bandwidth, directionality, beam-width, etc. The optimized design has been fabricated and tested. Wherever the results are not found as desired; problem has been comprehensively investigated and analyzed. This is found associated with a discontinuity at feed line, fabrication tolerance constraints and parasitic capacitance at the edges or the bent of the microstrip feedline which introduce the parasitic reactance in antenna design. Here, the presented work explores a generalized theoretical procedure for the compensation of associated problem by incorporating the reactive patch on the feedline. The developed theory is applied in fabrication and tested for the desired results.

scholarly journals Ultrawideband Low-Profile and Miniaturized Spoof Plasmonic Vivaldi Antenna for Base Station

2020 ◽  
Vol 10 (7) ◽  
pp. 2429 ◽  
Author(s):  
Li Hui Dai ◽  
Chong Tan ◽  
Yong Jin Zhou
Keyword(s):  
Radiation Pattern ◽  
Frequency Band ◽  
High Gain ◽  
Base Station ◽  
Ultra Wideband ◽  
Radiation Patterns ◽  
Low Profile ◽  
Simulation Results ◽  
Vivaldi Antenna ◽  
Good Agreement

Stable radiation pattern, high gain, and miniaturization are necessary for the ultra-wideband antennas in the 2G/3G/4G/5G base station applications. Here, an ultrawideband and miniaturized spoof plasmonic antipodal Vivaldi antenna (AVA) is proposed, which is composed of the AVA and the loaded periodic grooves. The designed operating frequency band is from 1.8 GHz to 6 GHz, and the average gain is 7.24 dBi. Furthermore, the measured results show that the radiation patterns of the plasmonic AVA are stable. The measured results are in good agreement with the simulation results.

Sign in / Sign up

Export Citation Format

Share Document