scholarly journals Innovative Apparatus for Testing Filtration, Sorption and CO2/CH4 Exchange Sorption Processes Under Isobaric Conditions on Sorbent Subjected to Confining Pressure in Terms of Laboratory Tests of CO2-ECBM Technology

Sensors ◽  
2020 ◽  
Vol 20 (20) ◽  
pp. 5823
Author(s):  
Mateusz Kudasik ◽  
Norbert Skoczylas ◽  
Anna Pajdak
Keyword(s):  
Confining Pressure ◽  
Sample Volume ◽  
Injection System ◽  
Coal Bed ◽  
Methane Recovery ◽  
Pressure System ◽  
Correct Operation ◽  
System A ◽  
In Situ Conditions

In recent years, the interest in the sorption properties of coal in conditions corresponding to in situ has increased due to the continuous development of research on CO2-ECBM (Enhanced Coal Bed Methane recovery) technology. In order to gain a better insight into a number of phenomena related to filtration, sorption and CO2/CH4 exchange sorption occurring in coal loaded with confining pressure, which corresponds to the in situ conditions, an innovative research apparatus was built to enable temporal and spatial analysis of these phenomena. The constructed apparatus consists of three systems: a high-pressure system, a gas injection system and a gas emission system. The work presents the results of basic apparatus tests, which were aimed at checking its correct operation and determining its specifications. These tests involved carrying out trial measurements of methane (CH4) filtration processes, CH4 sorption and CO2/CH4 exchange sorption on a coal sample. The results of the tests showed among other things that the apparatus ensured the regulation of the confining pressure in the range of 0.1–40 MPa, the regulation of the pressure at the inlet and outlet of the sample in the range of 0.1–1.6 MPa and 0.1–1.0 MPa and the measurement of changes in the sample volume in the range of 0–7.85 cm3. The results of the tests confirmed the correct functioning of the constructed apparatus.

scholarly journals Inelastic compaction and permeability evolution in volcanic rock

2016 ◽  
Author(s):  
Jamie I. Farquharson ◽  
Patrick Baud ◽  
Michael J. Heap
Keyword(s):  
Volcanic Rock ◽  
Confining Pressure ◽  
Permeability Evolution ◽  
Physical Limit ◽  
In Situ Conditions ◽  
Wide Range ◽  
Porosity And Permeability ◽  
Progressive Strain ◽  
Active Volcanoes

Abstract. Active volcanoes are mechanically dynamic environments, and edifice-forming material may often be subjected to significant amounts of stress and strain. It is understood that porous volcanic rock can compact inelastically under a wide range of in situ conditions. In this contribution, we explore the evolution of porosity and permeability – critical properties influencing the style and magnitude of volcanic activity – as a function of inelastic compaction of porous andesite under triaxial conditions. Progressive strain accumulation is associated with progressive porosity loss. The efficiency of compaction was found to be related to the effective confining pressure under which deformation occurred: at higher effective pressure, more porosity was lost for any given amount of strain. Permeability evolution is more complex, with small amounts of stress-induced compaction ( 0.20) where samples may undergo a reduction in permeability by two orders of magnitude relative to their initial values. A physical limit to compaction is discussed, which we suggest is echoed in a limit to the potential for permeability reduction in compacting volcanic rock. Compiled literature data illustrate that at high strain (both in the brittle and ductile regimes), porosity ϕ and permeability k tend to converge towards intermediate values (i.e. 0.10 ≤ ϕ ≤ 0.20; 10–14 ≤ k ≤10–13 m2). These results are discussed in light of their potential ramifications for impacting edifice outgassing – and in turn, eruptive activity – at active volcanoes.

scholarly journals Rock Surface Fungi in Deep Continental Biosphere—Exploration of Microbial Community Formation with Subsurface In Situ Biofilm Trap

2020 ◽  
Vol 9 (1) ◽  
pp. 64
Author(s):  
Maija Nuppunen-Puputti ◽  
Riikka Kietäväinen ◽  
Lotta Purkamo ◽  
Pauliina Rajala ◽  
Merja Itävaara ◽  
...  
Keyword(s):  
Significant Proportion ◽  
Debaryomyces Hansenii ◽  
Fungal Communities ◽  
Fungal Colonization ◽  
Rock Surface ◽  
Mica Schist ◽  
Deep Subsurface ◽  
Bacterial Phyla ◽  
In Situ Conditions

Fungi have an important role in nutrient cycling in most ecosystems on Earth, yet their ecology and functionality in deep continental subsurface remain unknown. Here, we report the first observations of active fungal colonization of mica schist in the deep continental biosphere and the ability of deep subsurface fungi to attach to rock surfaces under in situ conditions in groundwater at 500 and 967 m depth in Precambrian bedrock. We present an in situ subsurface biofilm trap, designed to reveal sessile microbial communities on rock surface in deep continental groundwater, using Outokumpu Deep Drill Hole, in eastern Finland, as a test site. The observed fungal phyla in Outokumpu subsurface were Basidiomycota, Ascomycota, and Mortierellomycota. In addition, significant proportion of the community represented unclassified Fungi. Sessile fungal communities on mica schist surfaces differed from the planktic fungal communities. The main bacterial phyla were Firmicutes, Proteobacteria, and Actinobacteriota. Biofilm formation on rock surfaces is a slow process and our results indicate that fungal and bacterial communities dominate the early surface attachment process, when pristine mineral surfaces are exposed to deep subsurface ecosystems. Various fungi showed statistically significant cross-kingdom correlation with both thiosulfate and sulfate reducing bacteria, e.g., SRB2 with fungi Debaryomyces hansenii.

scholarly journals Discrete element analysis of the punching behaviour of a secured drapery system: from laboratory characterization to idealized in situ conditions

2021 ◽  
Author(s):  
Antonio Pol ◽  
Fabio Gabrieli ◽  
Lorenzo Brezzi
Keyword(s):  
Mechanical Response ◽  
Steel Wire ◽  
Discrete Element ◽  
Wire Mesh ◽  
Steel Plates ◽  
Loading Conditions ◽  
Element Analysis ◽  
In Situ Conditions ◽  
Wire Meshes

AbstractIn this work, the mechanical response of a steel wire mesh panel against a punching load is studied starting from laboratory test conditions and extending the results to field applications. Wire meshes anchored with bolts and steel plates are extensively used in rockfall protection and slope stabilization. Their performances are evaluated through laboratory tests, but the mechanical constraints, the geometry and the loading conditions may strongly differ from the in situ conditions leading to incorrect estimations of the strength of the mesh. In this work, the discrete element method is used to simulate a wire mesh. After validation of the numerical mesh model against experimental data, the punching behaviour of an anchored mesh panel is investigated in order to obtain a more realistic characterization of the mesh mechanical response in field conditions. The dimension of the punching element, its position, the anchor plate size and the anchor spacing are varied, providing analytical relationships able to predict the panel response in different loading conditions. Furthermore, the mesh panel aspect ratio is analysed showing the existence of an optimal value. The results of this study can provide useful information to practitioners for designing secured drapery systems, as well as for the assessment of their safety conditions.

scholarly journals Simulation of CO2-geosequestration enhanced coal bed methane recovery with a deformation-flow coupled model

2009 ◽  
Vol 1 (1) ◽  
pp. 81-89 ◽  
Author(s):  
Wang Zuo-tang ◽  
Wang Guo-xiong ◽  
Rudolph V. ◽  
Diniz da Costa J. C. ◽  
Huang Pei-ming ◽  
...  
Keyword(s):  
Coupled Model ◽  
Coal Bed ◽  
Coal Bed Methane ◽  
Methane Recovery

scholarly journals Relating Induced in Situ Conditions of Raw Chicken Breast Meat to Pinking

2004 ◽  
Vol 83 (1) ◽  
pp. 109-118 ◽  
Author(s):  
K. Holownia ◽  
M.S. Chinnan ◽  
A.E. Reynolds ◽  
JW Davis
Keyword(s):  
Chicken Breast ◽  
Breast Meat ◽  
In Situ Conditions ◽  
Chicken Breast Meat

scholarly journals A microscopic approach to investigate bacteria under in situ conditions in sea-ice samples

2001 ◽  
Vol 33 ◽  
pp. 304-310 ◽  
Author(s):  
Karen Junge ◽  
Christopher Krembs ◽  
Jody Deming ◽  
Aaron Stierle ◽  
Hajo Eicken
Keyword(s):  
Sea Ice ◽  
Pore Space ◽  
Three Dimensional ◽  
Epifluorescence Microscopy ◽  
Microbial Populations ◽  
Microbial Life ◽  
Dimensional Network ◽  
In Situ Conditions ◽  
Fluorescent Stain

AbstractMicrobial populations and activity within sea ice have been well described based on bulk measurements from melted sea-ice samples. However, melting destroys the micro-environments within the ice matrix and does not allow for examination of microbial populations at a spatial scale relevant to the organism. Here, we describe the development of a new method allowing for microscopic observations of bacteria localized within the three-dimensional network of brine inclusions in sea ice under in situ conditions. Conventional bacterial staining procedures, using the DNA-specific fluorescent stain DAPI, epifluorescence microscopy and image analysis, were adapted to examine bacteria and their associations with various surfaces within microtomed sections of sea ice at temperatures from −2° to −15°C. The utility and sensitivity of the method were demonstrated by analyzing artificial sea-ice preparations of decimal dilutions of a known bacterial culture. When applied to natural, particle-rich sea ice, the method allowed distinction between bacteria and particles at high magnification. At lower magnifications, observations of bacteria could be combined with those of other organisms and with morphology and particle content of the pore space. The method described here may ultimately aid in discerning constraints on microbial life at extremely low temperatures.

Trial applications at gymnasiums of in-situ sound absorption measurement method by ensemble averaging technique

2021 ◽  
Vol 263 (2) ◽  
pp. 4532-4537
Author(s):  
Toru Otsuru ◽  
Reiji Tomiku ◽  
Noriko Okamoto ◽  
Siwat Lawanwadeekul
Keyword(s):  
Measurement Method ◽  
Sound Absorption ◽  
Glass Wool ◽  
Absorption Measurement ◽  
Ensemble Averaging ◽  
Averaging Technique ◽  
In Situ Conditions ◽  
Measurement Consistency ◽  
Absorption Characteristics

The authors have been published a series of papers on a measurement method for sound absorption characteristics of materials using ensemble averaging technique, i.e., EA method. The papers' results included measurement mechanisms, measurement uncertainty, and so on. Herein, to examine adaptability, especially in in-situ conditions, the EA method is applied to measure absorption characteristics of materials installed in two gymnasiums. A glass-wool panel with the dimension of 0.5 m by 0.5 m by 0.05 m and with the density of 32 kg m^-3 was brought around and measured to check the measurement consistency. Several measurements were conducted during badminton plays were undergoing. Measured sound absorption coefficients revealed that most results agree well with those measured in reverberation rooms. Certain improvement is necessary for the specimen brought to the in-situ measurement to keep the consistency. The inconsistency is considered to originate from unstable conditions between the specimen and floor.

Sign in / Sign up

Export Citation Format

Share Document