scholarly journals Fabrication of ZnO/Carbon Quantum Dots Composite Sensor for Detecting NO Gas

Sensors ◽  
2020 ◽  
Vol 20 (17) ◽  
pp. 4961
Author(s):  
Ziyang Yu ◽  
Liang Zhang ◽  
Xiangyue Wang ◽  
Dong He ◽  
Hui Suo ◽  
...  
Keyword(s):  
Quantum Dots ◽  
Functional Group ◽  
Carbon Quantum Dots ◽  
X Ray Diffraction ◽  
Gas Sensitivity ◽  
X Ray ◽  
Surface Areas ◽  
Grinding Method ◽  
Recovery Times ◽  
Response And Recovery

ZnO and carbon quantum dots (CQDs) were synthesized by a hydrothermal method, and CQDs were doped into ZnO by a grinding method to fabricate a ZnO/CQDs composite. The X-ray diffraction and the scanning electron microscope revealed that the as-prepared ZnO has a structure of wurtzite hexagonal ZnO and a morphology of a flower-like microsphere which can provide more surface areas to adsorbed gases. The ZnO/CQDs composite has a higher gas sensitivity response to NO gas than ZnO microspheres. A gas sensitivity test of the ZnO/CQDs composite showed that the sensor had a high NO response (238 for 100 ppm NO) and NO selectivity. The detection limit of the ZnO/CQDs composite to NO was 100 ppb and the response and recovery times were 34 and 36 s, respectively. The active functional group provided by CQDs has a significant effect on NO gas sensitivity, and the gas sensitivity mechanism of the ZnO/CQDs composite is discussed.

scholarly journals Y-Doped ZnO Nanorods by Hydrothermal Method and Their Acetone Gas Sensitivity

2013 ◽  
Vol 2013 ◽  
pp. 1-6 ◽  
Author(s):  
Peng Yu ◽  
Jing Wang ◽  
Hai-ying Du ◽  
Peng-jun Yao ◽  
Yuwen Hao ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Zno Nanorods ◽  
Hydrothermal Process ◽  
X Ray Diffraction ◽  
Gas Sensitivity ◽  
X Ray ◽  
Recovery Times ◽  
Response And Recovery ◽  
Doped Zno ◽  
Scanning Electron

Pure and yttrium- (Y-) doped (1 at%, 3 at%, and 7 at%) ZnO nanorods were synthesized using a hydrothermal process. The crystallography and microstructure of the synthesized samples were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), and energy dispersive X-ray spectroscopy (EDX). Comparing with pure ZnO nanorods, Y-doped ZnO exhibited improved acetone sensing properties. The response of 1 at% Y-doped ZnO nanorods to 100 ppm acetone is larger than that of pure ZnO nanorods. The response and recovery times of 1 at% Y-doped ZnO nanorods to 100 ppm acetone are about 30 s and 90 s, respectively. The gas sensor based on Y-doped ZnO nanorods showed good selectivity to acetone in the interfere gases of ammonia, benzene, formaldehyde, toluene, and methanol. The formation mechanism of the ZnO nanorods was briefly analyzed.

Fabrication of TiO2 sensor using rapid breakdown anodization method to measure pressure, humidity and sense gases at room temperature

2019 ◽  
pp. 1694-1703
Author(s):  
Reem Saadi Khaleel ◽  
Mustafa Shakir Hashim
Keyword(s):  
Room Temperature ◽  
Average Pressure ◽  
Spherical Nanoparticles ◽  
X Ray Diffraction ◽  
X Ray ◽  
Recovery Times ◽  
Sensitivity And Selectivity ◽  
Response And Recovery ◽  
Anodization Method ◽  
Rapid Breakdown Anodization

Rapid breakdown anodization (RBA) process was used to fabricate TiO2 sensor to measure pressure and humidity and sense gases at room temperature. This chemical process transformed Ti to its oxide (TiO2) as a powder with amorphous phase as X ray diffraction (XRD) technique confirmed.  This oxide consisted from semi spherical nanoparticles and titania nanotubes (TNTs) as Scanning electron microscope (SEM) technique showed.  TiO2 powder was deposited on Ti substrates by using electrophoretic deposition (EPD) method.   Average pressure sensitivity was 0.34 MΩ/bar and hysteresis area was 1.4 MΩ .bar. Resistance of TiO2 decreased exponentially with the increasing of relative humidity (RH%). The sensitivity% of TiO2 for RH% was greater than 70% in the range of (50-95). TiO2 was tested as a sensor for Ammonia, Ethanol and Methanol. Its sensitivity and selectivity towards Ammonia were the greatest but the shortest response and recovery times were recorded toward Methanol.

Detection of accumulated continuously ethanol concentration by ZnO–SnO2 composite nanorods sensor

2021 ◽  
pp. 2150395
Author(s):  
Xiang-Bing Li ◽  
Da-Qian Mo ◽  
Xiao-Yan Niu ◽  
Qian-Qian Zhang ◽  
Shu-Yi Ma ◽  
...  
Keyword(s):  
Recovery Time ◽  
Ethanol Concentration ◽  
Physical Adsorption ◽  
X Ray Diffraction ◽  
Gas Sensitivity ◽  
X Ray ◽  
Atomic Force ◽  
Electrospinning Method ◽  
Response And Recovery ◽  
Composite Nanorods

ZnO–SnO2 composite nanorods with rough surfaces were synthesized via a coaxially nested needle electrospinning method. The morphology and nanostructure were characterized by scanning electron microscopy, atomic force microscope, EDS mapping, nitrogen physical adsorption, and X-ray diffraction. The synthesis mechanisms of ZnO–SnO2 nanorods were discussed, which combined the gas sensitivity advantages of different materials. ZnO–SnO2 nanorods sensor with good ethanol gas sensitivity achieved accurate measurement of continuous ethanol concentration. The sensor exhibited good selectivity to ethanol in the presence of formaldehyde, methanol, acetone, acetic acid, benzene, and xylene at 290[Formula: see text]C. The response and recovery time to 100 ppm ethanol were about 13 and 35 s, respectively. The energy band, barrier, charge transfer of ZnO–SnO2 composite material was discussed, and its optimization of gas sensitivity was analyzed in detail.

scholarly journals Synthesis of ZnO-CuO flower-like hetero-nanostructures as volatile organic compounds (VOCs) sensor at room temperature

2018 ◽  
Vol 36 (3) ◽  
pp. 452-459
Author(s):  
Raad S. Sabry ◽  
Roonak Abdul Salam A. Alkareem
Keyword(s):  
Volatile Organic Compounds ◽  
Organic Compounds ◽  
Room Temperature ◽  
Dip Coating ◽  
X Ray Diffraction ◽  
X Ray ◽  
Volatile Organic ◽  
Recovery Times ◽  
Coating Methods ◽  
Response And Recovery

AbstractZnO-CuO flower-like hetero-nanostructures were successfully prepared by combining hydrothermal and dip coating methods. Flower-like hetero-nanostructures of ZnO-CuO were examined by X-ray diffraction (XRD), field emission scanning electron microscopy (FE-SEM), and UV-Vis. The sensing properties of ZnO-CuO flower-like hetero-nanostructures to volatile organic compounds (VOCs) were evaluated in a chamber containing acetone or isopropanol gas at room temperature. The sensitivity of ZnO-CuO flower-like hetero-nanostructures to VOCs was enhanced compared to that of pure leafage-like ZnO nanostructures. Response and recovery times were about 5 s and 6 s to 50 ppm acetone, and 10 s and 8 s to 50 ppm isopropanol, respectively. The sensing performance of ZnO-CuO flower-like hetero-nanostructures was attributed to the addition of CuO that led to formation of p-n junctions at the interface between the CuO and ZnO. In addition, the sensing mechanism was briefly discussed.

Acetylene Sensing by ZnO/TiO2 Nanoparticles

2020 ◽  
Vol 15 (1) ◽  
pp. 41-45 ◽  
Author(s):  
Zhi-Cheng Zhong ◽  
Zhao-Jun Jing ◽  
Kui-Yuan Liu ◽  
Tong Liu
Keyword(s):  
Gas Sensors ◽  
Operating Temperature ◽  
Sol Gel ◽  
Fast Response ◽  
X Ray Diffraction ◽  
Uniform Size ◽  
X Ray ◽  
Recovery Times ◽  
Response And Recovery ◽  
Hydrothermal Methods

We adopted the sol–gel and hydrothermal methods to prepare the TiO2 nanomaterials doped with ZnO. We adopted X-ray diffraction, scanning electron microscopy, and the Brunauer–Emmett–Teller method to investigate the materials’ structures and morphologies. The results showed that the prepared TiO2 nanomaterials had uniform size and good dispersibility. Gas sensors were fabricated and their performances in acetylene sensing were assessed. The results show that the sensor prepared with the ZnO/TiO2 nanomaterial doped with 10 wt% ZnO gave fast response and recovery times for acetylene gas at different concentrations. When the operating temperature was 280 °C, the gas sensor detected 200 ppm acetylene gas with a response sensitivity of 9.9, a response time of 5 s, and a recovery time of 2 s.

Mo-W-O thin films for CO sensing

2000 ◽  
Vol 638 ◽  
Author(s):  
Elisabetta Comini ◽  
Matteo Ferroni ◽  
Vincenzo Guidi ◽  
Giuliano Martinelli ◽  
Michele Sacerdoti ◽  
...  
Keyword(s):  
Thin Films ◽  
Gas Sensing ◽  
Weight Ratio ◽  
X Ray Diffraction ◽  
Composite Target ◽  
X Ray ◽  
Structural Characterisation ◽  
Gas Sensing Properties ◽  
Recovery Times ◽  
Response And Recovery

AbstractThe Mo-W-O thin films were deposited by RF reactive sputtering from composite target of W and Mo (20:80 weight ratio). Structural characterisation was carried out by X-ray diffraction spectroscopy and the composition of the film was obtained by Rutherford backscattering analysis. The layers were investigated by volt-amperometric technique for electrical and gas-sensing properties. The films were capable of sensing CO. No effect of poisoning of the surface was recorded and recovery of the resistance was complete. A concentration of CO as low as 15 ppm produced a relative variation in the conductance of 390% with response and recovery times of about 2 minutes at a working temperature of 200°C.

scholarly journals Fabrication of Cr2O3: ZnO Nanostructure Thin Film Prepared by PLD Technique as NH3 Gas Sensor

2021 ◽  
pp. 2176-2187
Author(s):  
S.M. AbdulKareem ◽  
M.H. Suhail ◽  
I. K. Adehmash
Keyword(s):  
Response Time ◽  
Operating Temperature ◽  
Average Crystallite Size ◽  
X Ray Diffraction ◽  
Gas Sensitivity ◽  
Force Microscopy ◽  
Zno Nanostructure ◽  
Atomic Force ◽  
Recovery Times ◽  
Response And Recovery

     Chromium oxide (Cr2O3) doped ZnO nanoparticles were prepared by pulsed laser deposition (PLD) technique at different concentration ratios (0, 3, 5, 7 and 9 wt %) of ZnO on glass substrate. The effects of ZnO dopant on the average crystallite size of the synthesized nanoparticles was examined By X-ray diffraction. The morphological features were detected using atomic force microscopy (AFM). The optical band gap value was observed to range between 2.78 to 2.50 eV by UV-Vis absorption spectroscopy, with longer wavelength shifted in comparison with that of the bulk Cr2O3 (~3eV). Gas sensitivity, response, and recovery times of the sensor in the presence of NH3 gas were studied and discussed. In the present work, we found that the sensitivity was increased upon increasing the concentration ratio from 3 to 5%wt of ZnO, whereas it was decreased again over that value. Also, we found that the sensitivity was increased when increasing operating temperature, while the response time was decreased. The optimum concentrations ratio for NH3 gas sensitivity at 5%wt ZnO revealed sensitivity of 66.67% and response time of 14s at operating temperature of 300oC and 700mJ PLD energy.

scholarly journals IMPROVEMENT OF SIMVASTATIN DISSOLUTION RATE USING DERIVATIVE NON-COVALENT APPROACH BY SOLVENT DROP GRINDING METHOD

2019 ◽  
pp. 21-24
Author(s):  
IYAN SOPYAN ◽  
INSAN SUNAN KURNIWAN SYAH ◽  
DESI NURHAYTI ◽  
ARIF BUDIMAN
Keyword(s):  
Dissolution Rate ◽  
Differential Scanning Calorimeter ◽  
Functional Group ◽  
Type Ii ◽  
Infrared Spectrophotometry ◽  
X Ray Diffraction ◽  
X Ray ◽  
Grinding Method ◽  
Ft Ir ◽  
Saturated Solubility

Objective: This study aimed to enhance the solubility of simvastatin using noncovalent derivatives (NCDs) with oxalic acid (OA), fumaric acid (AF), and nicotinamide (NK) as conformers. Methods: NCDs were prepared using by a solvent drop grinding (SDG). The NCDs formed were evaluated for saturated solubility test, NCDs with the highest saturation solubility were then characterized by Fourier transform infrared spectrophotometry (FT-IR), differential scanning calorimeter (DSC), powder x-ray diffractometry (PXRD) and the particulate dissolution using type II of USP test. Results: SV-OA NCDs showed the highest solubility; thus NCDS of SV-OA were characterized by X-ray diffraction showing a new peak at 2ϴ = 28.96 °C and differential scanning calorimeter showed a change of endothermic peak from 134.3 °C to 69 °C. Infrared spectroscopy indicated that there were no functional group changes from simvastatin, while the dissolution rate increased from 68.22% to 76.08%. Conclusion: SV-OA NCDs show an increased profile of solubility and dissolution compared to pure simvastatin.

Structural and Acetone Sensing Properties of La-Doped Porous In2O3 Nanospheres by Hydrothermal Synthesis

2014 ◽  
Vol 1053 ◽  
pp. 177-180
Author(s):  
Dan Han ◽  
Peng Song ◽  
Qi Wang ◽  
Hui Hui Zhang
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Operating Temperature ◽  
X Ray Diffraction ◽  
Acetone Concentration ◽  
X Ray ◽  
Recovery Times ◽  
Response And Recovery ◽  
La Doped ◽  
Scanning Electron

The La-doped porous In2O3 nanospheres were prepared by a simple hydrothermal method, and La3+ accounted for 3 mol% of the In3+. The La exists and has been doped in the lattice of In2O3 characterized respectively by the means of energy dispersive X-ray spectroscopy (EDS) and X-ray diffraction (XRD), the morphology of the samples with uniform nanospheres observed by field-emission scanning electron microscopy (FESEM). Moreover, the sensor exhibits higher response properties compared with pure porous In2O3 nanospheres towards different acetone concentration at operating temperature 300 °C. The response and recovery times is about 13 s and 8 s to 50 ppm acetone.

scholarly journals Preparation, Characterization, and Mechanistic Understanding of Pd-Decorated ZnO Nanowires for Ethanol Sensing

2013 ◽  
Vol 2013 ◽  
pp. 1-8 ◽  
Author(s):  
Xiao Deng ◽  
Shengbo Sang ◽  
Pengwei Li ◽  
Gang Li ◽  
Fanqin Gao ◽  
...  
Keyword(s):  
Gas Sensing ◽  
Operating Temperature ◽  
Zno Nanowires ◽  
X Ray Diffraction ◽  
X Ray ◽  
Recovery Times ◽  
Response And Recovery ◽  
New Perspective ◽  
Ethanol Sensing ◽  
Higher Sensitivity

ZnO nanowires (ZnO-NWs) and Pd-decorated ZnO nanowires (Pd-ZnO-NWs) were prepared by hydrothermal growth and characterized by scanning electron microscopy (SEM) and X-ray diffraction (XRD). When used for gas sensing, both types of nanowires showed a good selectivity to ethanol but a higher sensitivity and lower operating temperature were found with Pd-ZnO-NWs sensors comparing to those of ZnO-NWs sensor. When exposed to 200 ppm ethanol, our ZnO-NWs sensor showed a sensitivity of about 2.69 at 425°C whereas 1.3 at. % Pd-ZnO-NWs sensor provided a 57% more detection sensibility at 325°C. In addition, both response and recovery times of Pd-ZnO-NWs sensors were significantly reduced (9 s) comparing to the ZnO-NWs. Finally, Pd-ZnO-NWs sensor also showed a much lower detection limit of about 1 ppm. The sensing mechanism of Pd-ZnO-NWs sensors has also been clarified, thereby providing a new perspective for further improvement of the sensing performance of ethanol sensors.

Sign in / Sign up

Export Citation Format

Share Document