scholarly journals Operators’ Load Monitoring and Management

Sensors ◽  
2020 ◽  
Vol 20 (17) ◽  
pp. 4665
Author(s):  
Utku Kale ◽  
József Rohács ◽  
Dániel Rohács

Due to the introduction of highly automated vehicles and systems, the tasks of operators (drivers, pilots, air traffic controllers, production process managers) are in transition from “active control” to “passive monitoring” and “supervising”. As a result of this transition, the roles of task load and workload are decreasing while the role of the mental load is increasing, thereby the new type of loads might be defined as information load and communication load. This paper deals with operators’ load monitoring and management in highly automated systems. This research (i) introduces the changes in the role of operators and requirements in load management, (ii) defines the operators’ models, (iii) describes the possible application of sensors and their integration into the working environment of operators, and (iv) develops the load observation and management concept. There are some examples of analyses of measurements and the concept of validation is discussed. This paper mainly deals with operators, particularly pilots and air traffic controllers (ATCOs).

WARTA ARDHIA ◽  
2014 ◽  
Vol 40 (2) ◽  
pp. 85-98
Author(s):  
Yaddy Supriyadi ◽  
Rusdi Abdullah

Mitigation action towards aviation occurrence in Indonesia, according to number of aviation accident of the National Transport Safety Commitee, have not been showing a significant results. It can be caused by two things. First, the continuous development of aviation knowledge and technology. Second, the gaps between knowledge and skills that acquired during training phases and those required in the working environment This research is aimed to identify these gaps. The lack of understanding of Air Traffic Controllers on the concept of separation and how to implement it, minimum English speaking skills, and no training on RNA V and RNP are findings related to training solution. Whilst the malfunction of communication and monitoring devices, and no callibration to those devices are findings related to non-training solution. Pemecahan permasalahan kecelakaan penerbangan di Indonesia, berdasarkan data jumlah kecelakaan pesawat dari Komisi Nasional Keselamatan Transportasi, dapat dikatakan belum optimal. Masalah tersebut dapat dilihat dari dua hal, yaitu perkembangan ilmu pengetahuan dan teknologi penerbangan maupun kesenjangan yang terjadi antara kebutuhan pengetahuan dan keterampilan personil di lapangan dengan pengetahuan dan keterampilan yang diberikan pada masa pendidikan dan pelatihan. Penelitian ini dimaksudkan untuk mengidentifikasi kesenjangan tersebut. Kurangnya pemahaman personil Pemandu Lalu Lintas Udara terhadap konsep pemberian separation dan implementasinya, kurangnya keterampilan bahasa Inggris dan belum terprogramnya program pelatihan RNAV dan RNP merupakan temuan yang bersifat pelatihan. Sementara tidak optimalnya fungsi peralatan komunikasi dan monitoring bahkan tidak dapat dioperasikannya peralatan monitoring serta tidak adanya program kalibrasi terhadap peralatan tersebut merupakan hasil temuan yang bersifat non-pelatihan dari penelitian ini.


2015 ◽  
Vol 27 (3) ◽  
pp. 241-263 ◽  
Author(s):  
Laura Pylväs ◽  
Petri Nokelainen ◽  
Hilkka Roisko

Purpose – The purpose of this paper is to apply the Developmental Model of Vocational Excellence (DMVE) in the domain of air traffic control and to describe the characteristics and predictors related to air traffic controllers’ (ATCO) vocational expertise and excellence. Based on DMVE, the study analyses the role of natural abilities (gifts), intrinsic characteristics (self-regulatory abilities) and extrinsic conditions (domain and non-domain specific factors) in ATCOs’ vocational development. Design/methodology/approach – The target population of the multiple case study consisted of ATCOs in Finland (N = 300), of which 28 were interviewed. The interviewees represented four different airports. Initially, three key personnel interviews were conducted to validate the structured theme interview instrument that was subsequently used for the 28 interviews. The data set also included the ATCOs’ aptitude test scores and training records. Employee assessments were used to determine their on-the-job performance level (expertise vs excellence). The research questions were examined using theoretical concept analysis. The qualitative data analysis was conducted with content analysis and Bayesian classification modelling. Findings – The findings indicate that cognitive skills, self-reflection, volition and goal-orientation are considered to be ATCOs’ most important vocational characteristics in addition to interpersonal, intrapersonal and spatial skills. The main differences between the ATCOs representing vocational expertise and those representing vocational excellence were related to self-regulation; motivation and volition in particular proved to be somewhat stronger in the latter group. Research limitations/implications – It was acknowledged that there are limitations in the present study. First, the four airports were not selected randomly. Although they represent different types of airports (and ATCO job profiles) in Finland quite well, future studies should include comparative aspect to airports in other countries. Second, the number of participants (N = 28) in the study was quite small, limiting generalization of the results to the target population (N = 300). Future research on this domain should be extended to include also quantitative measurements, allowing more generalizable results. Third, although the analysis for the research question 3 was based on a technique that is not sensitive to missing values (BCM), missing data in ATCOs’ aptitude test scores, training records and employee assessments added uncertainty to the results. Practical implications – ATCOs’ highly controlled and pre-defined work presents a challenge to work motivation, which is seen as one of the determining factors in safety in air traffic controlling (ATC). In the future, more emphasis should be placed on the prerequisites of professional development such as leadership (human resource management, feedback, employees’ opportunity to influence), working environment (physical and social environment), educational possibilities and career progression, as well as professional benefits (salary and working hours). Originality/value – Although ATC is a fairly studied topic since 1970s, most studies related to ATCOs have concentrated on training, learning on the job, cognitive capacity and processing and stress tolerance. This study extends the emerging research in the field on self-regulation by adopting DMVE to investigate its role, alongside natural abilities and domain and non-domain specific factors, to vocational talent development in different skill acquisition stages.


WARTA ARDHIA ◽  
2017 ◽  
Vol 42 (3) ◽  
pp. 139
Author(s):  
Susanti Susanti

Sebagai upaya dalam meningkatkan keselamatan penerbangan khususnya di bandar udara, maka perlu dilakukan kajian tentang fatigue dan Job Stress ATC yang memegang peranan penting dalam menjaga keselamatan khususnya penanganan terhadap pesawat. Maksud kajian adalah untuk mengevaluasi bagaimana peran kelelahan dan stres kerja ATC dapat diantisipasi untuk mencegah faktor human error. Tujuan kajian ini adalah memberikan bahan masukan kepada penyelenggara jasa angkutan udara dan instansi terkait untuk mencegah fatigue dan job stress dengan melakukan upaya-upaya yang maksimal. Hasil kajian ini mengindikasikan beberapa faktor yang mempengaruhi stres kerja, yang paling besar memberikan pengaruh adalah faktor beban kerja (workload) yang memberikan kontribusi sebesar 3.24, kemudian disusul oleh hubungan kerja (human relationship) sebesar 2.53, lingkungan kerja (working environment) sebesar 2.11 dan konfilk peran (role conflict) sebesar 2.12. [Air Traffic Controllers Fatigue and Job Stress at X Airport ] In the effort to improve aviation safety, particularly at the airports, it is necessary to conduct the research concerning on the fatigue and job stress of the Air Traffic Controller (ATC) whom have an important role in maintaining aviation safety particularly in the aircrafts control and guidance. The purpose of this study is to evaluate the fatigue and job stress of the ATC so that it can be anticipated to prevent the occurrence of any human errors. The aim of this study is to provide the recommendation for aviation service operator and other related stakeholders in order to reduce the fatigue and job stress. From the conclusion, it is indicated that several factors affect the fatigue and job stress in which the most important factors (in descending order) are the workload (score 3.24), human relationship (score 2.53), the working environment (score 2.11) and role conflict (score 2.12).


2013 ◽  
Vol 20 (2) ◽  
pp. 232-241 ◽  
Author(s):  
Kjersti Bergheim ◽  
Jarle Eid ◽  
Sigurd William Hystad ◽  
Morten Birkeland Nielsen ◽  
Kathryn Mearns ◽  
...  

Vortex ◽  
2021 ◽  
Vol 2 (2) ◽  
pp. 57
Author(s):  
Via Choirul Seftiyana

Air traffic controllers are under excessive stress because of their job. This has been linked to aspects of ATC work such as high job demands, time or responsibility pressure, or inadequate equipment. Types of work that require more vigilance, such as air traffic controllers at airports, are closely related to mental jobs that require high concentration. Because there is a negative impact on a company if it gives mental workload too high or too low for its employees, it is necessary to measure it to find out the right mental workload for its employees. This study aims to calculate the mental workload felt by ATC personnel in the APP unit. Measurement of mental workload in this study using the NASA-TLX (National Aeronautics and Space Administration Task Load Index). This method measures 6 (six) dimensions of workload size, namely Mental Demand, Physical Demand, Temporal Demand, Performance, Effort and Frustation Level


Author(s):  
Jóhann Wium ◽  
Jennifer Eaglestone

Abstract. This article presents a review and categorization of job analyses on the role of air traffic controllers (ATCO). There are three parts – how the role has been conceptualized, why it was conceptualized in this manner, and what we can conclude from developments in ATCO job analysis. The article includes a history of job analysis in air traffic control and two tables summarizing task and worker analyses. A large amount of information is available on tasks and attributes and we conclude that ATCO job analyses have been carried out in a varied and disunited manner. While there is no universally accepted analysis for the role of ATCO, previous analyses could nonetheless be used as a foundation for future analytic work.


Sign in / Sign up

Export Citation Format

Share Document