scholarly journals Optimized CNT-PDMS Flexible Composite for Attachable Health-Care Device

Sensors ◽  
2020 ◽  
Vol 20 (16) ◽  
pp. 4523 ◽  
Author(s):  
Jian Du ◽  
Li Wang ◽  
Yanbin Shi ◽  
Feng Zhang ◽  
Shiheng Hu ◽  
...  
Keyword(s):  
Composite Material ◽  
Percolation Threshold ◽  
Young’S Modulus ◽  
Cross Section ◽  
Young's Modulus ◽  
Large Strain ◽  
Weight Ratio ◽  
Linear Range ◽  
Wide Range ◽  
The Cross

The CNT-PDMS composite has been widely adopted in flexible devices due to its high elasticity, piezoresistivity, and biocompatibility. In a wide range of applications, CNT-PDMS composite sensors were used for resistive strain measurement. Accordingly, the percolation threshold 2%~4% of the CNT weight ratio in the CNT-PDMS composite was commonly selected, which is expected to achieve the optimized piezoresistive sensitivity. However, the linear range around the percolation threshold weight ratio (2%~4%) limits its application in a stable output of large strain (>20%). Therefore, comprehensive understanding of the electromechanical, mechanical, and electrical properties for the CNT-PDMS composite with different CNT weight ratios was expected. In this paper, a systematic study was conducted on the piezoresistivity, Young’s modulus, conductivity, impedance, and the cross-section morphology of different CNT weight ratios (1 to 10 wt%) of the CNT-PDMS composite material. It was experimentally observed that the piezo-resistive sensitivity of CNT-PDMS negatively correlated with the increase in the CNT weight ratio. However, the electrical conductivity, Young’s modulus, tensile strength, and the linear range of piezoresistive response of the CNT-PDMS composite positively correlated with the increase in CNT weight ratio. Furthermore, the mechanism of these phenomena was analyzed through the cross-section morphology of the CNT-PDMS composite material by using SEM imaging. From this analysis, a guideline was proposed for large strain (40%) measurement applications (e.g., motion monitoring of the human body of the finger, arm, foot, etc.), the CNT weight ratio 8 wt% was suggested to achieve the best piezoresistive sensitivity in the linear range.

Elastic Properties of Normal and Binormal Helical Nanowires

2006 ◽  
Vol 963 ◽  
Author(s):  
Alexandre Fontes da Fonseca ◽  
C P Malta ◽  
Douglas S Galvão
Keyword(s):  
Simple Model ◽  
Young’S Modulus ◽  
Elastic Properties ◽  
Cross Section ◽  
Young's Modulus ◽  
Helical Axis ◽  
Geometric Features ◽  
Kirchhoff Rod ◽  
Rod Model ◽  
The Cross

ABSTRACTA helical nanowire can be defined as being a nanoscopic rod whose axis follows a helical curve in space. In the case of a nanowire with asymmetric cross section, the helical nanostructure can be classified as normal or binormal helix, according to the orientation of the cross section with respect to the helical axis of the structure. In this work, we present a simple model to study the elastic properties of a helical nanowire with asymmetric cross section. We use the framework of the Kirchhoff rod model to obtain an expression relating the Hooke's constant, h, of normal and binormal nanohelices to their geometric features. We also obtain the Young's modulus values. These relations can be used by experimentalists to evaluate the elastic properties of helical nanostructures. We showed that the Hooke's constant of a normal nanohelix is higher than that of a binormal one. We illustrate our results using experimentally obtained nanohelices reported in the literature.

scholarly journals Simultaneous Modeling of Young’s Modulus, Yield Stress, and Rupture Strain of Gelatin/Cellulose Acetate Microfibrous/Nanofibrous Scaffolds Using RSM

2021 ◽  
Vol 9 ◽  
Author(s):  
Alireza Barazesh ◽  
Mahdi Navidbakhsh ◽  
Ali Abouei Mehrizi ◽  
Mojtaba Koosha ◽  
Sajad Razavi Bazaz ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Cellulose Acetate ◽  
Yield Stress ◽  
Young’S Modulus ◽  
Mechanical Characteristics ◽  
Rotation Speed ◽  
Young's Modulus ◽  
Structural Parameters ◽  
Weight Ratio ◽  
Wide Range

Electrospinning is a promising method to fabricate bioengineered scaffolds, thanks to utilizing various types of biopolymers, flexible structures, and also the diversity of output properties. Mechanical properties are one of the major components of scaffold design to fabricate an efficacious artificial substitute for the natural extracellular matrix. Additionally, fiber orientations, as one of the scaffold structural parameters, could play a crucial role in the application of fabricated fibrous scaffolds. In this study, gelatin was used as a highly biocompatible polymer in blend with cellulose acetate (CA), a polysaccharide, to enhance the achievable range of mechanical characteristics to fabricated fibrous electrospun scaffolds. By altering input variables, such as polymers concentration, weight ratio, and mandrel rotation speed, scaffolds with various mechanical and morphological properties could be achieved. As expected, the electrospun scaffold with a higher mandrel rotation speed shows higher fiber alignment. A wide range of mechanical properties were gained through different values of polymer ratio and total concentration. A general improvement in mechanical strength was observed by increasing the concentration and CA content in the solution, but contradictory effects, such as high viscosity in more concentrated solutions, influenced the mechanical characteristics as well. A response surface method was applied on experimental results in order to describe a continuous variation of Young’s modulus, yield stress, and strain at rupture. A full quadratic version of equations with the 95% confidence level was applied for the response modeling. This model would be an aid for engineers to adjust mandrel rotation speed, solution concentration, and gelatin/CA ratio to achieve desired mechanical and structural properties.

Vibration of Zinc Oxide Nanowires in Electric Field

2017 ◽  
Author(s):  
Lifeng Wang ◽  
Saisai Liu ◽  
Jianpeng Yi
Keyword(s):  
Electric Field ◽  
Young’S Modulus ◽  
Cross Section ◽  
Md Simulation ◽  
Young's Modulus ◽  
Continuum Theory ◽  
Zno Nanowires ◽  
Vibration Frequencies ◽  
Polarization Direction ◽  
The Cross

This paper studies the vibration of Zinc oxide (ZnO) nanowires in electric field via molecular dynamics (MD) simulation and continuum beam models. First, the size effects of the equivalent Young’s modulus and piezoelectric constant of ZnO nanowires are obtained by MD simulation and characterized by core-shell model. The piezoelectric constants of ZnO nanowires decrease with the rising of the size of cross section. The equivalent tensile and bending Young’s modulus of ZnO nanowires in polarization direction increases with the increasing of the cross section size. The equivalent tensile and bending Young’s modulus in polarization direction predicted by core-shell model is in good agreement with MD simulation. Then, the vibration of the cantilevered ZnO nanobeam is simulated by MD. When the cross section size becomes larger, the vibration frequencies predicted by continuum theory coincide with those obtained by MD simulation better. Finally, the effect of electric field on vibration frequency of a ZnO nanowire is studied by MD simulation and continuum beam models. It is found that the natural frequencies rise with the increasing of electric field for the case of positive electric field in polarization direction. But the natural frequencies will decrease with the increasing of negative electric field when the intensity of the electric field is relatively weak. The natural frequency is hard to be obtained when the phase transition is occurring in relatively strong negative electric field. The vibration frequencies of the cantilevered Timoshenko beam with axial force due to the effects of electric field are obtained. The frequencies obtained by Timoshenko beam model agree with MD results very well. The vibration frequencies of the continuum theory agree with MD results better when the size of the cross section increases. The vibration frequencies of the ZnO nanowire keep constant when the direction of electric field is perpendicular to the polarization direction.

scholarly journals Hardness, Young’s Modulus and Elastic Recovery in Magnetron Sputtered Amorphous AlMgB14 Films

Crystals ◽  
2020 ◽  
Vol 10 (9) ◽  
pp. 823
Author(s):  
Alexander M. Grishin
Keyword(s):  
Young’S Modulus ◽  
Indentation Size Effect ◽  
Young's Modulus ◽  
Elastic Recovery ◽  
Rf Power ◽  
Magnesium Boride ◽  
Wide Range ◽  
Aluminum Magnesium Boride ◽  
Optical And Mechanical Properties ◽  
Diamond Probe

We report optical and mechanical properties of hard aluminum magnesium boride films magnetron sputtered from a stoichiometric AlMgB14 ceramic target onto Corning® 1737 Glass and Si (100) wafers. High target sputtering rf-power and sufficiently short target-to-substrate distance appeared to be critical processing conditions. Amorphous AlMgB14 films demonstrate very strong indentation size effect (ISE): exceptionally high nanohardness H = 88 GPa and elastic Young’s modulus E* = 517 GPa at 26 nm of the diamond probe penetration depth and almost constant values, respectively, of about 35 GPa and 275 GPa starting at depths of about 2–3% of films’ thickness. For comparative analysis of elastic strain to failure index  H/E*, resistance to plastic deformation ratio H3/E*2 and elastic recovery ratio We were obtained in nanoindentation tests performed in a wide range of loading forces from 0.5 to 40 mN. High authentic numerical values of H = 50 GPa and E* = 340 GPa correlate with as low as only 10% of total energy dissipating through the plastic deformations.

scholarly journals Optimization of Geometrical Parameters of Hollow-core Slabs by Formwork-free Shaping for Construction in Seismic Areas

2020 ◽  
Vol 8 (6) ◽  
pp. 4973-4977
Keyword(s):  
Cross Section ◽  
High Strength ◽  
Geometrical Parameters ◽  
Hollow Core ◽  
Constructive Solution ◽  
Industrial Buildings ◽  
Operational Load ◽  
Wide Range ◽  
Hollow Core Slab ◽  
The Cross

The building norms and standards of Uzbekistan on the reinforced concrete structures do not regulate the design of hollow-core slabs of formwork-free shaping, reinforced with prestressed wire reinforcement. The manufacturing technology of such slabs allows creating a wide range of products that increase the possibility of their use in various structural systems in residential, civil and industrial buildings, but in non-seismic areas only. The aim of this work is to develop a constructive solution for the cross section of a prestressed hollow-core floor slab of bench formwork-free shaping, reinforced with high-strength wire reinforcement, in order to create a wide range of products intended for construction in seismic areas. To achieve the goal, the problem of determining the optimal combination of height and configuration parameters of the cross section of such a slab is solved, meeting the normalized operational requirements and limitations of earthquake-resistant building standards. The main variable parameters are the height and the void degree of the section, characterized by the size and shape of voids. In calculating the cross-section of a hollow-core slab when substantiating the theoretical basis for the calculation, the cross section is reduced to the equivalent I-section. As a result of research, a constructive solution was developed for the slab cross section of the maximum parameter values (the span, operational load) set by the customer. The parameters of the slab cross-section are: the height 190 mm, the hollowness 38%, the height of the upper thickened flange (compared with the height of the lower flange) of the given section is 0.27h, the height of the lower flange is 0.17h, the reduced (total) thickness of all ribs “b” is 0.32 of the width of the upper flange. The voids in the section along the height of the slab are arranged asymmetrically. A patent for a utility model has been received for the proposed constructive solution of the slab cross section.

Effects of cross-sessional area and aspect ratio coupled with orientation on mechanical properties and deformation behavior of Cu nanowires

2021 ◽  
Author(s):  
Hui Cao ◽  
Wenke Chen ◽  
Zhiyuan Rui ◽  
Changfeng Yan
Keyword(s):  
Mechanical Properties ◽  
Aspect Ratio ◽  
Yield Stress ◽  
Young’S Modulus ◽  
Young's Modulus ◽  
Cross Sectional Area ◽  
Sectional Area ◽  
Cross Sectional ◽  
Cu Nanowires ◽  
The Cross

Abstract Metal nanomaterials exhibit excellent mechanical properties compared with corresponding bulk materials and have potential applications in various areas. Despite a number of studies of the size effect on Cu nanowires mechanical properties with square cross-sectional, investigations of them in rectangular cross-sectional with various sizes at constant volume are rare, and lack of multifactor coupling effect on mechanical properties and quantitative investigation. In this work, the dependence of mechanical properties and deformation mechanisms of Cu nanowires/nanoplates under tension on cross-sessional area, aspect ratio of cross-sectional coupled with orientation were investigated using molecular dynamics simulations and the semi-empirical expressions related to mechanical properties were proposed. The simulation results show that the Young’s modulus and the yield stress sharply increase with the aspect ratio except for the <110>{110}{001} Cu nanowires/nanoplates at the same cross-sectional area. And the Young’s modulus increases while the yield stress decreases with the cross-sectional area of Cu nanowires. However, both of them increase with the cross-sectional area of Cu nanoplates. Besides, the Young’s modulus increases with the cross-sectional area at all the orientations. The yield stress shows a mildly downward trend except for the <111> Cu nanowires with increased cross-sectional area. For the Cu nanowires with a small cross-sectional area, the surface force increases with the aspect ratio. In contrast, it decreases with the aspect ratio increase at a large cross-sectional area. At the cross-sectional area of 13.068 nm2, the surface force decreases with the aspect ratio of the <110> Cu nanowires while it increases at other orientations. The surface force is a linearly decreasing function of the cross-sectional area at different orientations. Quantitative studies show that Young’s modulus and yield stress to the aspect ratio of the Cu nanowires satisfy exponent relationship. In addition, the main deformation mechanism of Cu nanowires is the nucleation and propagation of partial dislocations while it is the twinning-dominated reorientation for Cu nanoplates.

Graphene oxide and zinc oxide decorated chitosan nanocomposite biofilms for packaging applications

2020 ◽  
Vol 40 (2) ◽  
pp. 152-157 ◽  
Author(s):  
Pınar Terzioglu ◽  
Yasin Altin ◽  
Ayse Kalemtas ◽  
Ayse Celik Bedeloglu
Keyword(s):  
Tensile Strength ◽  
Zinc Oxide ◽  
Graphene Oxide ◽  
Composite Film ◽  
Young’S Modulus ◽  
Mechanical Performance ◽  
Young's Modulus ◽  
Chitosan Film ◽  
Oxide Composite ◽  
Wide Range

AbstractRecently, due to sustainable development and environmental protection policies, there is increasing interest in the development of new biodegradable polymer-based multifunctional composites. Chitosan is one of the most remarkable and preferred biopolymers, which is environmentally friendly as well as renewable, biocompatible, and inexpensive. Though it has a wide range of potential applications, the major limitation of chitosan – the problem of poor mechanical performance – needs to be solved. In this work, graphene oxide was first produced and then used to manufacture a chitosan/graphene oxide/zinc oxide composite film through a casting method. The properties of the chitosan film and the chitosan/graphene oxide/zinc oxide composite film were investigated using Fourier transform infrared spectroscopy, mechanical, thermal gravimetric, and ultraviolet (UV)-visible spectroscopy analyses. The results showed that the incorporation of graphene oxide and zinc oxide into the chitosan matrix resulted in enhanced mechanical properties and thermal stability of chitosan biocomposite films. The graphene oxide- and zinc oxide-reinforced chitosan film showed 2527 MPa and 55.72 MPa of Young’s modulus and tensile strength, respectively, while neat chitosan showed only 1549 MPa and 37.91 MPa of Young’s modulus and tensile strength, respectively. Conversely, the addition of graphene oxide decreased the transmittance, notably in the UV region.

A Model for the Conductivity and Compliance of Unpropped and Natural Fractures

SPE Journal ◽  
2017 ◽  
Vol 22 (06) ◽  
pp. 1893-1914 ◽  
Author(s):  
Weiwei Wu ◽  
Mukul M. Sharma
Keyword(s):  
Plastic Deformation ◽  
Yield Stress ◽  
Young’S Modulus ◽  
Correlation Length ◽  
Young's Modulus ◽  
Heterogeneous Surfaces ◽  
Natural Fractures ◽  
Wide Range ◽  
Fracture Closure ◽  
Deformation Interaction

Summary Fluid flow in unpropped and natural fractures is critical in many geophysical processes and engineering applications. The flow conductivity in these fractures depends on their closure under stress, which is a complicated mechanical process that is challenging to model. The challenges come from the deformation interaction and the close coupling among the fracture geometry, pressure, and deformation, making the closure computationally expensive to describe. Hence, most of the previous models either use a small grid system or disregard deformation interaction or plastic deformation. In this study, a numerical model is developed to simulate the stress-driven closure and the conductivity for fractures with rough surfaces. The model integrates elastoplastic deformation and deformation interaction, and can handle contact between heterogeneous surfaces. Computation is optimized and accelerated by use of an algorithm that combines the conjugate-gradient (CG) method and the fast-Fourier-transform (FFT) technique. Computation time is significantly reduced compared with traditional methods. For example, a speedup of five orders of magnitude is obtained for a grid size of 512 × 512. The model is validated against analytical problems and experiments, for both elastic-only and elastoplastic scenarios. It is shown that interaction between asperities and plastic deformation cannot be ignored when modeling fracture closure. By applying our model, roughness and yield stress are found to have a larger effect on fracture closure and compliance than Young's modulus. Plastic deformation is a dominant contributor to closure and can make up more than 70% of the total closure in some shales. The plastic deformation also significantly alters the relationship between fracture stiffness and conductivity. Surfaces with reduced correlation length produce greater conductivity because of their larger apertures, despite more fracture closure. They have a similar fraction of area in contact as compared with surfaces with longer fracture length, but the pattern of area in contact is more scattered. Contact between heterogeneous surfaces with more soft minerals leads to increased plastic deformation and fracture closure, and results in lower fracture conductivity. Fracture compliance appears not to be as sensitive to the distribution pattern of hard and soft minerals. Our model compares well with experimental data for fracture closure, and can be applied to unpropped or natural fractures. These results are obtained for a wide range of conditions: surface profile following Gaussian distribution with correlation length of 50 µm and roughness of 4 to 50 µm, yield stress of 100 to 1500 MPa, and Young's modulus of 20 to 60 GPa. The results may be different for situations outside this range of parameters.

Sign in / Sign up

Export Citation Format

Share Document