scholarly journals Selective Generation of Lamb Wave Modes in a Finite-Width Plate by Angle-Beam Excitation Method

Sensors ◽  
2020 ◽  
Vol 20 (14) ◽  
pp. 3868 ◽  
Author(s):  
Sang-Jin Park ◽  
Young-Sang Joo ◽  
Hoe-Woong Kim ◽  
Sung-Kyun Kim
Keyword(s):  
Lamb Wave ◽  
Laser Scanning ◽  
Wave Mode ◽  
Finite Width ◽  
Acoustic Insulation ◽  
Selective Generation ◽  
Lamb Wave Propagation ◽  
Different Characteristics ◽  
Beam Excitation ◽  
Excitation Method

A Lamb wave in a plate with a finite width has both thickness and width modes, whereas only thickness modes exist in an infinitely wide plate. The thickness and width modes are numerously formed in a finite-width plate, and they all have different cut-off frequencies, wave velocities, and wave structures. These different characteristics can be utilized in various applications, but a selective generation method for a particular Lamb wave mode in a finite-width plate has not been sufficiently studied, and only a method using multiple elements has been reported. This paper presents the selective generation of a certain Lamb wave mode in a finite-width plate by an angle-beam excitation method using single or dual wedges. In the proposed generation method, a specially designed wedge with grooves or a patch having insulation layers is employed for partial acoustic insulation of the ultrasonic energy incident into the plate. The feasibility of the proposed method was investigated through finite element method (FEM) simulations for Lamb wave excitation and propagation, and then experimentally demonstrated by the measurement of Lamb wave propagation using a laser scanning vibrometer.

scholarly journals Leaky Lamb Wave Radiation from a Waveguide Plate with Finite Width

2020 ◽  
Vol 10 (22) ◽  
pp. 8104
Author(s):  
Sang-Jin Park ◽  
Hoe-Woong Kim ◽  
Young-Sang Joo
Keyword(s):  
Lamb Wave ◽  
Lamb Waves ◽  
Wave Mode ◽  
Wave Radiation ◽  
Finite Width ◽  
Propagation Characteristics ◽  
Radiation Characteristics ◽  
Radiation Beam ◽  
Leaky Lamb Wave ◽  
Waveguide Sensor

In this paper, leaky Lamb wave radiation from a waveguide plate with finite width is investigated to gain a basic understanding of the radiation characteristics of the plate-type waveguide sensor. Although the leaky Lamb wave behavior has already been theoretically revealed, most studies have only dealt with two dimensional radiations of a single leaky Lamb wave mode in an infinitely wide plate, and the effect of the width modes (that are additionally formed by the lateral sides of the plate) on leaky Lamb wave radiation has not been fully addressed. This work aimed to explain the propagation behavior and characteristics of the Lamb waves induced by the existence of the width modes and to reveal their effects on leaky Lamb wave radiation for the performance improvement of the waveguide sensor. To investigate the effect of the width modes in a waveguide plate with finite width, propagation characteristics of the Lamb waves were analyzed by the semi-analytical finite element (SAFE) method. Then, the Lamb wave radiation was computationally modeled on the basis of the analyzed propagation characteristics and was also experimentally measured for comparison. From the modeled and measured results of the leaky radiation beam, it was found that the width modes could affect leaky Lamb wave radiation with the mode superposition and radiation characteristics were significantly changed depending on the wave phase of the superposed modes on the radiation surface.

scholarly journals Application of Air-Coupled Ultrasonic Arrays for Excitation of a Slow Antisymmetric Lamb Wave

Sensors ◽  
2018 ◽  
Vol 18 (8) ◽  
pp. 2636 ◽  
Author(s):  
Rymantas Kazys ◽  
Almantas Vilpisauskas ◽  
Justina Sestoke
Keyword(s):  
Lamb Wave ◽  
Guided Waves ◽  
Ultrasound Velocity ◽  
Optimization Procedure ◽  
Wave Mode ◽  
Zero Order ◽  
Air Gap ◽  
Thin Plates ◽  
Low Frequencies ◽  
Excitation Method

Air-coupled excitation and reception of ultrasonic guided waves is already used for non-destructive testing and evaluation (NDT & E). Usually for air-coupled NDT & E purposes the lowest zero-order antisymmetric Lamb wave mode A0 is used, because it is most sensitive to internal defects and thickness variations. The velocity of the A0 mode is reduced with a reducing frequency and at low frequencies may become slower than the ultrasound velocity in air. Such a wave is named a slow Lamb wave. The objective of this research was the development and investigation of an air-coupled excitation method of the slow zero-order antisymmetric Lamb wave based on application of a piezoceramic ultrasonic array. We have proposed to excite the A0 mode by a planar air-coupled phased array with rectangular elements. The array is matched to the wavelength of the A0 mode in the film. Performance of such an excitation method was investigated both theoretically and experimentally. Two excitation methods of the array were analysed: when all array elements were excited simultaneously or one by one with a proper delay. In order to reduce crosstalk between array elements via the air gap, we have proposed an optimization procedure based on additional shifts of electric excitation impulses of the array elements. For experimental verification of the proposed approach a prototype of the air-coupled eight element array made of Pz-29 piezoceramic strips was manufactured. Experimental validation confirmed the possibility of exciting the slow A0 Lamb wave mode through the air gap in thin plates and films.

Lamb Wave Propagation Study Using Frequency-Wavenumber Analysis

2012 ◽  
Author(s):  
Zhenhua Tian ◽  
Lingyu Yu
Keyword(s):  
Wave Propagation ◽  
Lamb Wave ◽  
Experimental Testing ◽  
Wave Spectrum ◽  
Laser Doppler Vibrometer ◽  
Wave Mode ◽  
Wavenumber Domain ◽  
Time Space ◽  
Lamb Wave Propagation ◽  
Wave Modes

Lamb waves are dispersive and multi-modal. Various wave modes make the interpretation of Lamb wave signal very difficult. It is desired that different modes can be separated for individual analysis. In the this paper, we present our studies on the multimodal Lamb wave propagation and wave mode extraction using frequency-wavenumber analysis. Wave spectrum in the frequency-wavenumber domain shows clear distinction among Lamb wave modes being present. This allows separating them or extracting a desired Lamb wave mode through a novel filtering strategy. Thus a single mode Lamb can be identified and extracted for certain types of damage detection in structural health monitoring (SHM). These concepts are illustrated through experimental testing. A scanning laser Doppler vibrometer is used to acquiring the time-space wavefield regarding the multimodal Lamb wave propagation. Then the recorded wavefield was analyzed in frequency-wavenumber domain and decomposed into different wave modes.

Development of PZT fiber rosette to locate acoustic source

2021 ◽  
pp. 1045389X2199192
Author(s):  
Bao Chi Ha ◽  
Kevin Gilbert ◽  
Gang Wang
Keyword(s):  
Lead Zirconate Titanate ◽  
Health Monitoring ◽  
Lamb Wave ◽  
Lead Zirconate ◽  
Acoustic Source ◽  
Mechanical Coupling ◽  
Monitoring Applications ◽  
Commercial Off The Shelf ◽  
Lamb Wave Propagation ◽  
Strain Direction

Because of their electro-mechanical coupling property, Lead-Zirconate-Titanate (PZT) materials have been widely used for ultrasonic wave sensing and actuation in structural health monitoring applications. In this paper, a PZT rosette concept is proposed to conduct Lamb wave-based damage detection in panel-like structures by exploring its best directional sensing capability. First, a directivity study was conducted to investigate sensing of flexural Lamb wave propagation using a PZT fiber having d33 effects. Then, commercial off-the-shelf PZT fibers were polarized in-house in order to construct the PZT rosette configuration, in which three PZT fibers are oriented at 0°, 45°, 90°, respectively. Since Lamb wave responses are directly related to measured PZT fiber voltage signals, a simple interrogation scheme was developed to calculate principal strain direction in order to locate an acoustic source. Comprehensive tests were conducted to evaluate the performance of the proposed PZT rosette using an aluminum plate. It is shown that the PZT rosette is able to sense Lamb wave responses and accurately locate an acoustic source. We expect to further evaluate the PZT rosette performance when damages are introduced.

Determining impact induced damage by lamb wave mode extracted by EMD method

Measurement ◽  
2015 ◽  
Vol 65 ◽  
pp. 120-128 ◽  
Author(s):  
Xu Baochun ◽  
Yuan Shenfang ◽  
Wang Mulan ◽  
Qiu Lei
Keyword(s):  
Lamb Wave ◽  
Wave Mode ◽  
Emd Method
Sign in / Sign up

Export Citation Format

Share Document