scholarly journals A Low-Cost Information Monitoring System for Smart Farming Applications

Sensors ◽  
2020 ◽  
Vol 20 (8) ◽  
pp. 2367 ◽  
Author(s):  
Muhammad Saqib ◽  
Tarik Adnan Almohamad ◽  
Raja Majid Mehmood
Keyword(s):  
Low Power ◽  
Crop Production ◽  
Sensor Node ◽  
Large Scale ◽  
Reference Model ◽  
Low Cost ◽  
Small Scale ◽  
Communication Range ◽  
Information Monitoring ◽  
Agricultural Farm

A low-cost, low-power, and low data-rate solution is proposed to fulfill the requirements of information monitoring for actual large-scale agricultural farms. A small-scale farm can be easily managed. By contrast, a large farm will require automating equipment that contributes to crop production. Sensor based soil properties measurement plays an integral role in designing a fully automated agricultural farm, also provides more satisfactory results than any manual method. The existing information monitoring solutions are inefficient in terms of higher deployment cost and limited communication range to adapt the need of large-scale agriculture farms. A serial based low-power, long-range, and low-cost communication module is proposed to confront the challenges of monitoring information over long distances. In the proposed system, a tree-based communication mechanism is deployed to extend the communication range by adding intermediate nodes. Each sensor node consists of a solar panel, a rechargeable cell, a microcontroller, a moisture sensor, and a communication unit. Each node is capable to work as a sensor node and router node for network traffic. Minimized data logs from the central node are sent daily to the cloud for future analytics purpose. After conducting a detailed experiment in open sight, the communication distance measured 250 m between two points and increased to 750 m by adding two intermediate nodes. The minimum working current of each node was 2 mA, and the packet loss rate was approximately 2–5% on different packet sizes of the entire network. Results show that the proposed approach can be used as a reference model to meet the requirements for soil measurement, transmission, and storage in a large-scale agricultural farm.

scholarly journals Agricultural Technical Efficiency of Smallholder Farmers in Ethiopia: A Stochastic Frontier Approach

Land ◽  
2021 ◽  
Vol 10 (3) ◽  
pp. 246
Author(s):  
Markose Chekol Zewdie ◽  
Michele Moretti ◽  
Daregot Berihun Tenessa ◽  
Zemen Ayalew Ayele ◽  
Jan Nyssen ◽  
...  
Keyword(s):  
Technical Efficiency ◽  
Crop Production ◽  
Large Scale ◽  
Positive Impact ◽  
Smallholder Farmers ◽  
Stochastic Frontier ◽  
Crop Productivity ◽  
Small Scale ◽  
Stochastic Frontier Approach ◽  
Small Scale Irrigation

In the past decade, to improve crop production and productivity, Ethiopia has embarked on an ambitious irrigation farming expansion program and has introduced new large- and small-scale irrigation initiatives. However, in Ethiopia, poverty remains a challenge, and crop productivity per unit area of land is very low. Literature on the technical efficiency (TE) of large-scale and small-scale irrigation user farmers as compared to the non-user farmers in Ethiopia is also limited. Investigating smallholder farmers’ TE level and its principal determinants is very important to increase crop production and productivity and to improve smallholder farmers’ livelihood and food security. Using 1026 household-level cross-section data, this study adopts a technology flexible stochastic frontier approach to examine agricultural TE of large-scale irrigation users, small-scale irrigation users and non-user farmers in Ethiopia. The results indicate that, due to poor extension services and old-style agronomic practices, the mean TE of farmers is very low (44.33%), implying that there is a wider room for increasing crop production in the study areas through increasing the TE of smallholder farmers without additional investment in novel agricultural technologies. Results also show that large-scale irrigation user farmers (21.05%) are less technically efficient than small-scale irrigation user farmers (60.29%). However, improving irrigation infrastructure shifts the frontier up and has a positive impact on smallholder farmers’ output.

Coupled Thermo-Hydro-Geochemical Models of Engineered Barrier Systems: The Febex Project

2000 ◽  
Vol 663 ◽  
Author(s):  
J. Samper ◽  
R. Juncosa ◽  
V. Navarro ◽  
J. Delgado ◽  
L. Montenegro ◽  
...  
Keyword(s):  
Large Scale ◽  
Reference Model ◽  
Numerical Models ◽  
Full Scale ◽  
Small Scale ◽  
Model Parameters ◽  
In Situ Test ◽  
Wide Range ◽  
Engineered Barrier

ABSTRACTFEBEX (Full-scale Engineered Barrier EXperiment) is a demonstration and research project dealing with the bentonite engineered barrier designed for sealing and containment of waste in a high level radioactive waste repository (HLWR). It includes two main experiments: an situ full-scale test performed at Grimsel (GTS) and a mock-up test operating since February 1997 at CIEMAT facilities in Madrid (Spain) [1,2,3]. One of the objectives of FEBEX is the development and testing of conceptual and numerical models for the thermal, hydrodynamic, and geochemical (THG) processes expected to take place in engineered clay barriers. A significant improvement in coupled THG modeling of the clay barrier has been achieved both in terms of a better understanding of THG processes and more sophisticated THG computer codes. The ability of these models to reproduce the observed THG patterns in a wide range of THG conditions enhances the confidence in their prediction capabilities. Numerical THG models of heating and hydration experiments performed on small-scale lab cells provide excellent results for temperatures, water inflow and final water content in the cells [3]. Calculated concentrations at the end of the experiments reproduce most of the patterns of measured data. In general, the fit of concentrations of dissolved species is better than that of exchanged cations. These models were later used to simulate the evolution of the large-scale experiments (in situ and mock-up). Some thermo-hydrodynamic hypotheses and bentonite parameters were slightly revised during TH calibration of the mock-up test. The results of the reference model reproduce simultaneously the observed water inflows and bentonite temperatures and relative humidities. Although the model is highly sensitive to one-at-a-time variations in model parameters, the possibility of parameter combinations leading to similar fits cannot be precluded. The TH model of the “in situ” test is based on the same bentonite TH parameters and assumptions as for the “mock-up” test. Granite parameters were slightly modified during the calibration process in order to reproduce the observed thermal and hydrodynamic evolution. The reference model captures properly relative humidities and temperatures in the bentonite [3]. It also reproduces the observed spatial distribution of water pressures and temperatures in the granite. Once calibrated the TH aspects of the model, predictions of the THG evolution of both tests were performed. Data from the dismantling of the in situ test, which is planned for the summer of 2001, will provide a unique opportunity to test and validate current THG models of the EBS.

1-D Model Analysis of Tesla Turbine for Small Scale Organic Rankine Cycle (ORC) System

2017 ◽  
Author(s):  
Jian Song ◽  
Chun-wei Gu
Keyword(s):  
Large Scale ◽  
Low Cost ◽  
Organic Rankine Cycle ◽  
Axial Flow ◽  
Rankine Cycle ◽  
Expansion Ratio ◽  
Working Fluid ◽  
Small Scale ◽  
Low Grade ◽  
D Model

Energy shortage and environmental deterioration are two crucial issues that the developing world has to face. In order to solve these problems, conversion of low grade energy is attracting broad attention. Among all of the existing technologies, Organic Rankine Cycle (ORC) has been proven to be one of the most effective methods for the utilization of low grade heat sources. Turbine is a key component in ORC system and it plays an important role in system performance. Traditional turbine expanders, the axial flow turbine and the radial inflow turbine are typically selected in large scale ORC systems. However, in small and micro scale systems, traditional turbine expanders are not suitable due to large flow loss and high rotation speed. In this case, Tesla turbine allows a low-cost and reliable design for the organic expander that could be an attractive option for small scale ORC systems. A 1-D model of Tesla turbine is presented in this paper, which mainly focuses on the flow characteristics and the momentum transfer. This study improves the 1-D model, taking the nozzle limit expansion ratio into consideration, which is related to the installation angle of the nozzle and the specific heat ratio of the working fluid. The improved model is used to analyze Tesla turbine performance and predict turbine efficiency. Thermodynamic analysis is conducted for a small scale ORC system. The simulation results reveal that the ORC system can generate a considerable net power output. Therefore, Tesla turbine can be regarded as a potential choice to be applied in small scale ORC systems.

scholarly journals Large-Scale Additive Manufacturing for Low Cost Small-Scale Wind Turbine Manufacturing

2020 ◽  
Author(s):  
Brian Post ◽  
Phillip Chesser ◽  
Alex Roschli ◽  
Lonnie Love ◽  
Katherine Gaul
Keyword(s):  
Additive Manufacturing ◽  
Wind Turbine ◽  
Large Scale ◽  
Low Cost ◽  
Small Scale

scholarly journals Variational data assimilation with superparameterization

2015 ◽  
Vol 2 (2) ◽  
pp. 513-536 ◽  
Author(s):  
I. Grooms ◽  
Y. Lee
Keyword(s):  
Data Assimilation ◽  
Large Scale ◽  
Climate Models ◽  
Low Cost ◽  
Ocean Model ◽  
Variational Data Assimilation ◽  
Scale Model ◽  
Small Scale ◽  
New Applications ◽  
Lorenz 96

Abstract. Superparameterization (SP) is a multiscale computational approach wherein a large scale atmosphere or ocean model is coupled to an array of simulations of small scale dynamics on periodic domains embedded into the computational grid of the large scale model. SP has been successfully developed in global atmosphere and climate models, and is a promising approach for new applications. The authors develop a 3D-Var variational data assimilation framework for use with SP; the relatively low cost and simplicity of 3D-Var in comparison with ensemble approaches makes it a natural fit for relatively expensive multiscale SP models. To demonstrate the assimilation framework in a simple model, the authors develop a new system of ordinary differential equations similar to the two-scale Lorenz-'96 model. The system has one set of variables denoted {Yi}, with large and small scale parts, and the SP approximation to the system is straightforward. With the new assimilation framework the SP model approximates the large scale dynamics of the true system accurately.

scholarly journals Low-cost Large Scale Vermicompost Unit

2021 ◽  
Vol 2115 (1) ◽  
pp. 012026
Author(s):  
Sonam Solanki ◽  
Gunendra Mahore
Keyword(s):  
Large Scale ◽  
Low Cost ◽  
Small Scale ◽  
Scale Production ◽  
Key Innovation ◽  
Main Challenge ◽  
Long Run ◽  
Large Scale Production ◽  
Term Maintenance

Abstract In the current process of producing vermicompost on a large-scale, the main challenge is to keep the worms alive. This is achieved by maintaining temperature and moisture in their living medium. It is a difficult task to maintain these parameters throughout the process. Currently, this is achieved by building infrastructure but this method requires a large initial investment and long-run maintenance. Also, these methods are limited to small-scale production. For large-scale production, a unit is developed which utilises natural airflow with water and automation. The main aim of this unit is to provide favourable conditions to worms in large-scale production with very low investment and minimum maintenance in long term. The key innovation of this research is that the technology used in the unit should be practical and easy to adopt by small farmers. For long-term maintenance of the technology lesser number of parts are used.

scholarly journals Gloxinia—An Open-Source Sensing Platform to Monitor the Dynamic Responses of Plants

Sensors ◽  
2020 ◽  
Vol 20 (11) ◽  
pp. 3055
Author(s):  
Olivier Pieters ◽  
Tom De Swaef ◽  
Peter Lootens ◽  
Michiel Stock ◽  
Isabel Roldán-Ruiz ◽  
...  
Keyword(s):  
Open Source ◽  
Large Scale ◽  
Environmental Changes ◽  
Low Cost ◽  
Current Data ◽  
Dynamic Responses ◽  
Small Scale ◽  
Data Logging ◽  
Short Term ◽  
Sensing Platforms

The study of the dynamic responses of plants to short-term environmental changes is becoming increasingly important in basic plant science, phenotyping, breeding, crop management, and modelling. These short-term variations are crucial in plant adaptation to new environments and, consequently, in plant fitness and productivity. Scalable, versatile, accurate, and low-cost data-logging solutions are necessary to advance these fields and complement existing sensing platforms such as high-throughput phenotyping. However, current data logging and sensing platforms do not meet the requirements to monitor these responses. Therefore, a new modular data logging platform was designed, named Gloxinia. Different sensor boards are interconnected depending upon the needs, with the potential to scale to hundreds of sensors in a distributed sensor system. To demonstrate the architecture, two sensor boards were designed—one for single-ended measurements and one for lock-in amplifier based measurements, named Sylvatica and Planalta, respectively. To evaluate the performance of the system in small setups, a small-scale trial was conducted in a growth chamber. Expected plant dynamics were successfully captured, indicating proper operation of the system. Though a large scale trial was not performed, we expect the system to scale very well to larger setups. Additionally, the platform is open-source, enabling other users to easily build upon our work and perform application-specific optimisations.

scholarly journals A highly flexible laboratory setup to demonstrate granular flow characteristics

2020 ◽  
Vol 104 (2) ◽  
pp. 1581-1596
Author(s):  
Thomas Heinze
Keyword(s):  
Granular Flow ◽  
Large Scale ◽  
Numerical Models ◽  
Low Cost ◽  
Experimental Investigations ◽  
Small Scale ◽  
Local Pressure ◽  
Slope Length ◽  
Runout Distance ◽  
Laboratory Setup

Abstract Dynamics of snow avalanches or landslides can be described by rapid granular flow. Experimental investigations of granular flow at laboratory scale are often required to analyze flow behaviour and to develop adequate mathematical and numerical models. Most investigations use image-based analysis, and additional sensors such as pressure gauges are not always possible. Testing various scenarios and parameter variations such as different obstacle shapes and positions as well as basal topography and friction usually requires either the construction of a new laboratory setups for each test or a cumbersome reconstruction. In this work, a highly flexible and modular laboratory setup is presented based on LEGO bricks. The flexibility of the model is demonstrated, and possible extensions for future laboratory tests are outlined. The setup is able to reproduce published laboratory experiments addressing current scientific research topics, such as overflow of a rigid reflector, flow on a bumpy surface and against a rigid wall using standard image-based analysis. This makes the setup applicable for quick scenario testing, e.g. for hypothesis testing or for low-cost testing prior to large-scale experiments, and it can contribute to the validation of external results and to benchmarks of numerical models. Small-scale laboratory setups are also very useful for demonstration purposes such as education and public outreach, both crucial in the context of natural hazards. The presented setup enables variation of parameters such as of slope length, channel width, height and shape, inclination, bed friction, obstacle position and shape, as well as density, composition, amount and grain size of flowing mass. Observable quantities are flow type, flow height, flow path and flow velocity, as well as runout distance, size and shape of the deposited material. Additional sensors allow further quantitative assessments, such as local pressure values.

Herbicide Inputs for a New Agronomic Crop, Annual Wormwood (Artemisia annua)

1991 ◽  
Vol 5 (1) ◽  
pp. 117-124 ◽  
Author(s):  
Charles T. Bryson ◽  
Edward M. Croom
Keyword(s):  
Clinical Trials ◽  
Weed Control ◽  
Crop Production ◽  
Large Scale ◽  
Field Experiments ◽  
Production Systems ◽  
Artemisia Annua ◽  
Small Scale ◽  
Herbicide Treatments ◽  
Large Scale Cultivation

Annual wormwood has been cultivated on a small scale for production of the artemisinin class of antimalarial drugs in sufficient quantities for preclinical and clinical trials. Large scale cultivation will require a reliable, efficient crop production system. Production systems using 32 herbicides alone or in combinations were evaluated in growth chamber, greenhouse, and field experiments at Stoneville, MS from 1985 through 1988. The herbicide treatments that provided the best weed control were (A) metolachlor at 2.2 kg ai ha-1preemergence (PRE), (B) chloramben at 2.2 kg ai ha-1(PRE), or (C) trifluralin at 0.6 kg ai ha-1preplant soil incorporated (PPI) followed by fluazifop at 0.2 + 0.2 kg ai ha-1postemergence broadcast (POST) and acifluorfen at 0.6 kg ai ha-1(POST). These herbicide production systems provided excellent weed control (≥85%) and minimal crop injury (≤10%) with no effect on crop height or weight at harvest. Production of artemisinin was not reduced by herbicide treatments A, B, and C in 1987 and treatments B and C in 1988 when compared with the hand-weeded plots.

Community Monitoring Improves Public Service Provision at Scale: Experimental Evidence from a Child Development Program in Nicaragua

2020 ◽  
Author(s):  
Florencia López Boo ◽  
Jane Leer ◽  
Akito Kamei
Keyword(s):  
Child Development ◽  
Experimental Evidence ◽  
Large Scale ◽  
Service Providers ◽  
Low Cost ◽  
Development Program ◽  
Small Scale ◽  
Community Monitoring ◽  
Quality Assurance Mechanism ◽  
Intent To Treat

Expanding small-scale interventions without lowering quality and attenuating impact is a critical policy challenge. Community monitoring overs a low-cost quality assurance mechanism by making service providers account-able to local citizens, rather than distant administrators. This paper provides experimental evidence from a home visit parenting program implemented at scale by the Nicaraguan government, with two types of monitoring: (a) institutional monitoring; and (b) community monitoring. We find d a positive intent-to-treat effect on child development, but only among groups randomly assigned to community monitoring. Our findings show promise for the use of community monitoring to ensure quality in large-scale government-run social programs.

Sign in / Sign up

Export Citation Format

Share Document