scholarly journals An End-To-End LwM2M-Based Communication Architecture for Multimodal NB-IoT/BLE Devices

Sensors ◽  
2020 ◽  
Vol 20 (8) ◽  
pp. 2239 ◽  
Author(s):  
Subho Shankar Basu ◽  
Jetmir Haxhibeqiri ◽  
Mathias Baert ◽  
Bart Moons ◽  
Abdulkadir Karaagac ◽  
...  
Keyword(s):  
Transport Layer ◽  
Area Network ◽  
Protocol Stack ◽  
Wireless Internet ◽  
Wide Area Network ◽  
Long Distance ◽  
Communication Architecture ◽  
Data Rates ◽  
End To End ◽  
The Impact

The wireless Internet of Things (IoT) landscape is quite diverse. For instance, Low-Power Wide-Area Network (LPWAN) technologies offer low data rate communication over long distance, whereas Wireless Personal Area Network (WPAN) technologies can reach higher data rates, but with a reduced range. For simple IoT applications, communication requirements can be fulfilled by a single technology. However, the requirements of more demanding IoT use cases can vary over time and with the type of data being exchanged. This is pushing the design towards multimodal approaches, where different wireless IoT technologies are combined and the most appropriate one is used as per the need. This paper considers the combination of Narrow Band IoT (NB-IoT) and Bluetooth Low Energy (BLE) as communication options for an IoT device that is running a Lightweight Machine to Machine/Constrained Application Protocol (LwM2M/CoAP) protocol stack. It analyses the challenges incurred by different protocol stack options, such as different transfer modes (IP versus non-IP), the use of Static Context Header Compression (SCHC) techniques, and Datagram Transport Layer Security (DTLS) security modes, and discusses the impact of handover between both communication technologies. A suitable end-to-end architecture for the targeted multimodal communication is presented. Using a prototype implementation of this architecture, an in-depth assessment of handover and its resulting latency is performed.

scholarly journals A Long-Distance Communication Architecture for Medical Devices Based on LoRaWAN Protocol

Electronics ◽  
2021 ◽  
Vol 10 (8) ◽  
pp. 940
Author(s):  
Nicoleta Cristina Gaitan
Keyword(s):  
Energy Consumption ◽  
Long Range ◽  
Medical Devices ◽  
Low Energy ◽  
Area Network ◽  
Wide Area Network ◽  
Long Distance ◽  
Communication Architecture ◽  
Low Energy Consumption ◽  
Distance Communication

Recent market studies show that the market for remote monitoring devices of different medical parameters will grow exponentially. Globally, more than 4 million individuals will be monitored remotely from the perspective of different health parameters by 2023. Of particular importance is the way of remote transmission of the information acquired from the medical sensors. At this time, there are several methods such as Bluetooth, WI-FI, or other wireless communication interfaces. Recently, the communication based on LoRa (Long Range) technology has had an explosive development that allows the transmission of information over long distances with low energy consumption. The implementation of the IoT (Internet of Things) applications using LoRa devices based on open Long Range Wide-Area Network (LoRaWAN) protocol for long distances with low energy consumption can also be used in the medical field. Therefore, in this paper, we proposed and developed a long-distance communication architecture for medical devices based on the LoRaWAN protocol that allows data communications over a distance of more than 10 km.

scholarly journals Exposing End-to-End Delay in Software-Defined Networking

2019 ◽  
Vol 2019 ◽  
pp. 1-12 ◽  
Author(s):  
Ting Zhang ◽  
Bin Liu
Keyword(s):  
Large Scale ◽  
Packet Delay ◽  
Software Defined Networking ◽  
Area Network ◽  
Delay Model ◽  
Wide Area Network ◽  
Worst Case ◽  
End To End Delay ◽  
End To End ◽  
The Impact

Software-Defined Networking (SDN) shows us a promising picture to deploy the demanding services in a fast and cost-effective way. Till now, most SDN use cases are deployed in enterprise/campus networks and data center networks. However, when applying SDN to the large-scale networks, such as Wide Area Network (WAN), the end-to-end delay of packet traversal is suspected to be very large and needs to be further investigated. Moreover, stringent time constraint is the cornerstone for real-time applications in SDN. Understanding the packet delay in SDN-based large networks is crucial for the proper design of switch architecture and the optimization of network algorithms such as flow control algorithms. In this paper, we present a thorough systematic exploration on the end-to-end delay in SDN which consists of multiple nodes, fully exposing the components which contribute to the long delay. We disclose that SDN switches cannot completely avoid the generation of flow setup even in proactive mode and conduct data mining on the probability of flow setup. We propose an analytical model for the end-to-end delay. This model takes into account the impact of the different rule installation time consumption on different switches. Considering the delay in switches contributes a large proportion to the entire delay, we conduct various measurements on the delay of a single switch. Results for the delay at different flow setup rates and with different rule priority patterns are presented. Furthermore, we study the impact on packet delay caused by ternary content addressable memory (TCAM) update. We measure parameters in the delay model and find that if SDN is deployed in all segments of WAN, the delay of packet traversal will be increased up to 27.95 times in the worst case in our experimental settings, compared with the delay in conventional network. Such high delay may eventually lead the end-to-end connections fail to complete if no additional measures are taken.

scholarly journals Smart Monitoring and Controlling of Appliances Using LoRa Based IoT System

Designs ◽  
2021 ◽  
Vol 5 (1) ◽  
pp. 17
Author(s):  
Nur-A-Alam ◽  
Mominul Ahsan ◽  
Md. Abdul Based ◽  
Julfikar Haider ◽  
Eduardo M. G. Rodrigues
Keyword(s):  
Power Consumption ◽  
Low Power ◽  
Modular Design ◽  
Real Life ◽  
Environmental Data ◽  
Automation System ◽  
Area Network ◽  
Wide Area Network ◽  
Long Distance ◽  
At Home

In the era of Industry 4.0, remote monitoring and controlling appliance/equipment at home, institute, or industry from a long distance with low power consumption remains challenging. At present, some smart phones are being actively used to control appliances at home or institute using Internet of Things (IoT) systems. This paper presents a novel smart automation system using long range (LoRa) technology. The proposed LoRa based system consists of wireless communication system and different types of sensors, operated by a smart phone application and powered by a low-power battery, with an operating range of 3–12 km distance. The system established a connection between an android phone and a microprocessor (ESP32) through Wi-Fi at the sender end. The ESP32 module was connected to a LoRa module. At the receiver end, an ESP32 module and LoRa module without Wi-Fi was employed. Wide Area Network (WAN) communication protocol was used on the LoRa module to provide switching functionality of the targeted area. The performance of the system was evaluated by three real-life case studies through measuring environmental temperature and humidity, detecting fire, and controlling the switching functionality of appliances. Obtaining correct environmental data, fire detection with 90% accuracy, and switching functionality with 92.33% accuracy at a distance up to 12 km demonstrated the high performance of the system. The proposed smart system with modular design proved to be highly effective in controlling and monitoring home appliances from a longer distance with relatively lower power consumption.

Field Study of Low-Energy Long-Distance Wireless Communication for IoT Application in Remote Areas

Mekatronika ◽  
2020 ◽  
Vol 2 (1) ◽  
pp. 52-62
Author(s):  
Kwai Yang Sak ◽  
Ahmad Najmuddin Ibrahim
Keyword(s):  
Radio Frequency ◽  
Long Range ◽  
Essential Element ◽  
Low Energy ◽  
Line Of Sight ◽  
Area Network ◽  
Structural Elements ◽  
Wide Area Network ◽  
Residential Areas ◽  
Long Distance

Long Range (LoRa) is a wireless radio frequency technology under the Low Power Wide Area Network (LPWAN). LoRa is able to communicate long range and low energy consumption. The communication range has become an essential element in the wireless radio frequency technology in the Internet of Things (IoT). The presence of LoRa is able IoT application performs in long communication distances with high noise sensitivity ability. People can operate, monitor, and do a variety of tasks from a remote distance. Therefore, this research aims to evaluate the performance of the LoRa connection between radio transceivers in remote locations. The different environment and structural elements affect the LoRa performance. This thesis will be supported by the experiment that LoRa communication in different environments and tests. This experiment tests in line of sight (LOS) and non-line of sight (NLOS). Two sets of LoRa parameters, including Spreading Factor (SF), Bandwidth, and coding rate, are tested in different environments. The experiment tests the LoRa performance in various aspects: received signal strength indicator (RSSI) and packet received ratio (PPR) at different coverage ranges. In addition, the LoRa performance is evaluated in university, residential areas and vegetation areas under similar temperature, weather, and time. The LoRa coverage distance in the vegetation area and university area is reached 900 meters in the LOS test. Still, the vegetation area's signal is more stable and able to receive weaker RSSI signals. The LoRa coverage distance in the NLOS test is shorter compared to the LOS test. NLOS test has only one-third of the LOS LoRa communication distance. It is due to the signal penetration on structural elements such as buildings and woods cause the signal power loss and only transmitting a shorter distance. The LoRa parameter with SF9, 31.25kHz bandwidth and 4/8 coding rate has a better coverage range and stable connection.

Application Credibility Theory in the Smart Grid Information Network Security Assessment

2014 ◽  
Vol 960-961 ◽  
pp. 841-844
Author(s):  
Yan Bin Li ◽  
Yun Li ◽  
Wei Guo Li
Keyword(s):  
Smart Grid ◽  
Local Area Network ◽  
Credibility Theory ◽  
Local Network ◽  
Information Network ◽  
Area Network ◽  
Wide Area Network ◽  
Network Access ◽  
Smart Grid Security ◽  
The Impact

With the development of the smart grid , information network securityassessment affects the safe operation of the smart grid . In this paper, theimproved credibility theory and analytic hierarchy process , combined withstructural features of the smart grid network , From the wide area network ,access network, enterprise local network , local area network and the CPN-siteand home users to assess the impact of the five aspects of information networksfor smart grid security operation. And make the case for more security strategyto improve the reliability of the smart grid operation , thus providing a basisfor guiding the development and safe use of electricity grid users .

Chirp Spreading Spectrum in Imperfect Environment and Wireless Tree Topology Network

2021 ◽  
Author(s):  
Hongqiang Li ◽  
Dongyan Zhao ◽  
Xiaoke Tang ◽  
Jie Gan ◽  
Xu Zhao ◽  
...  
Keyword(s):  
Low Power ◽  
Rapid Development ◽  
Single Point ◽  
Multipath Fading ◽  
Tree Topology ◽  
Area Network ◽  
Wide Area Network ◽  
Target Node ◽  
Long Distance ◽  
And Performance

With the rapid development of IoT technology in recent years, higher requirements have been put forward for wireless communication technology. Low Power Wide Area Network (LPWAN) technology is emerging rapidly, the technology is characterized by low power consumption, low bandwidth, long-distance, and a large number of connections, and is specifically designed for Internet of Things applications. LoRa (Low Power Long Range Transceiver), as a typical representative of LPWAN technology, has been widely concerned and studied. This paper analyzes the performance of LoRa modulation in the tree topology network and analyzes the performance of LoRa modulation in the imperfect environment for point-to-point communication and multipoint-to-point communication. From theoretical analysis and performance simulation, it can be seen that the influence of frequency offset or multipath fading on LoRa signal is very obvious. However, when LoRa modulation is used for networking, multi-user interference will be introduced. Under the influence of many imperfect factors, the signal receiver performance of LoRa modulation will be difficult to guarantee. Because of these effects, Coordinated Multiple Points based on Timing Delay (DCoMP) is presented. Multiple nodes close to each other send the same data to the target node. Due to the inaccurate synchronization between nodes, there will be a certain relative delay when sending signals to the same target node. After the receiving node combines the signals of multiple nodes according to different relative delays, the reception performance of the signals can be improved. At the same time, the cooperative node can also actively adjust the signal sending time to improve the reception performance of the receiving node signal merging algorithm. LoRa modulation, by using DCoMP transmission, improves the reception of signals and thus the overall capacity of the system. Through the analysis of multipoint communication and single point communication, this paper is of great help to LoRa network deployment.

scholarly journals An Adaptive Spreading Factor Selection Scheme for a Single Channel LoRa Modem

Sensors ◽  
2020 ◽  
Vol 20 (4) ◽  
pp. 1008 ◽  
Author(s):  
Seungku Kim ◽  
Heonkook Lee ◽  
Sungho Jeon
Keyword(s):  
Low Power ◽  
Long Range ◽  
Single Channel ◽  
Wide Area ◽  
Area Network ◽  
Wide Area Network ◽  
Maximum Throughput ◽  
Spreading Factor ◽  
Selection Scheme ◽  
Data Rates

When the low power wide area network (LPWAN) was developed for the internet of things (IoT), it attracted significant attention. LoRa, which is one of the LPWAN technologies, provides low-power and long-range wireless communication using a frequency band under 1 GHz. A long-range wide area network (LoRaWAN) provides a simple star topology network that is not scalable; it supports multi-data rates by adjusting the spreading factor, code rate, and bandwidth. This paper proposes an adaptive spreading factor selection scheme for corresponding spreading factors (SFs) between a transmitter and receiver. The scheme enables the maximum throughput and minimum network cost, using cheap single channel LoRa modules. It provides iterative SF inspection and an SF selection algorithm that allows each link to communicate at independent data rates. We implemented a multi-hop LoRa network and evaluated the performance of experiments in various network topologies. The adaptive spreading factor selection (ASFS) scheme showed outstanding end-to-end throughput, peaking at three times the performance of standalone modems. We expect the ASFS scheme will be a suitable technology for applications requiring high throughput on a multi-hop network.

scholarly journals LoRaWAN and Blockchain based Safety and Health Monitoring System for Industry 4.0 Operators

Proceedings ◽  
2019 ◽  
Vol 42 (1) ◽  
pp. 77 ◽  
Author(s):  
Iván Froiz-Míguez ◽  
Paula Fraga-Lamas ◽  
José Varela-Barbeito ◽  
Tiago M. Fernández-Caramés
Keyword(s):  
Monitoring System ◽  
Industry 4.0 ◽  
Environmental Data ◽  
Insurance Companies ◽  
Area Network ◽  
Wide Area Network ◽  
Long Distance ◽  
Good Reliability ◽  
External Temperature ◽  
Safety And Health

The latest advances in the different Industry 4.0 technologies have enabled the automation and optimization of complex tasks of production processes thanks to their ability to monitor and track the state of physical elements like machinery, environmental sensors/actuators or industrial operators. This paper focuses on the latter and presents the design and evaluation of a system for monitoring industrial workers that provides a near real-time decentralized response system aimed at reacting and tracing events that affect operator personal safety and health. Such a monitoring system is based on the information collected from sensors encapsulated in IoT wearables that are used to measure both personal and environmental data. The communications architecture relies on LoRaWAN, an LPWAN (Low-Power Wide-Area Network) technology that offers good reliability in harsh communications environments and that provides relatively long distance communications with low-energy consumption. Specifically, each wearable sends the collected information (e.g., heart rate, altitude, external temperature, gas concentration, location) from the sensors to the nearest LoRaWAN gateway, which is transmitted to a pool of nodes where information is stored in a distributed manner. Such a decentralized system allows for providing information redundancy and guarantees its availability as long as there is an operative node. In addition, the proposed system is able to store and to process the collected data through smart contracts in a blockchain, which eliminate the need for a central backend and ensure the traceability and immutability of such data in order to share them with third parties (e.g., insurance companies or medical services).

scholarly journals A Study on the Impact of Nodes Density on the Energy Consumption of LoRa

2021 ◽  
Vol 15 (14) ◽  
pp. 157
Author(s):  
Aizat Faiz Ramli ◽  
Muhammad Ikram Shabry ◽  
Mohd Azlan Abu ◽  
Hafiz Basarudin
Keyword(s):  
Energy Efficiency ◽  
Energy Consumption ◽  
Low Power ◽  
Large Scale ◽  
Sensor Nodes ◽  
Delivery Ratio ◽  
Area Network ◽  
Wide Area Network ◽  
Consumption Ratio ◽  
The Impact

LoRaWAN is one of the leading Low power wide area network (LPWAN) LPWAN technologies that compete for the formation of big scale Internet of Things (IoT). It uses LoRa protocol to achieve long range, low bit rate and low power communication. Large scale LoRaWAN based IoT deployments can consist of battery powered sensor nodes. Therefore, the energy consumption and efficiency of these nodes are crucial factors that can influence the lifetime of the network. However, there is no coherent experimental based research which identifies the factors that influence the LoRa energy efficiency at various nodes density. In this paper, results on measuring the packet delivery ratio, packet loss, data rate and energy consumption ratio ECR to gauge the energy efficiency of LoRa devices at various nodes density are presented. It is shown that the ECR of LoRa is inversely proportional to the nodes density and that the ECR of the network is smaller at higher traffic indicating better network energy efficiency. It is also demonstrated that at high node density, spreading factor SF of 7 and 9 can improve the energy efficiency of the network by 5 and 3 times, respectively, compare to SF 11.

scholarly journals Anti-Multipath Performance Improvement of an M-ary Position Phase Shift Keying Modulation System

Sensors ◽  
2019 ◽  
Vol 19 (8) ◽  
pp. 1938 ◽  
Author(s):  
Haiyuan Wang ◽  
Hongxian Tian
Keyword(s):  
Phase Shift ◽  
High Reliability ◽  
Area Network ◽  
Phase Shift Keying ◽  
Wide Area Network ◽  
Long Distance ◽  
Phase Jump ◽  
Joint Decision ◽  
Main Path ◽  
Shift Keying

Low-Power Wide-Area Network (LPWAN) is the technology that the Internet-of-Things (IoT) uses in long-distance, wide-coverage scenarios. As one of the ultra-narrowband (UNB) modulation techniques, M-ary position phase shift keying (MPPSK) modulation can provide high coverage and high reliability for LPWAN. This paper proposes a multipath separation method based on MPPSK modulation, which aims to eliminate the influence of multipath on the main path without increasing the spectrum overhead and system complexity. Specifically, the modulation parameter of the system is adjusted according to the delay value, so that the phase jump of the multipath signal falls outside the phase jump of the main path symbol to achieve separation of the multipath from the main path. Moreover, a normalized symbol joint decision method is proposed in order to reduce the introduced noise while using multipath information for decisions. The simulation results indicate that the multipath separation conditions given in this paper can meet the requirements of multipath separation of MPPSK signals. Compared with the existing mainstream decision scheme, the normalized symbol joint decision improves the demodulation performance of the system.

Sign in / Sign up

Export Citation Format

Share Document